Ceramic femoral prosthesis in TKA - Present and future

Ceramics in Orthopaedics: Bioceramics and Alternative Bearings in Joint Arthroplasty - 12th International BIOLOX Symposium, Proceedings

Volumn , Issue , 2007, Pages 123-132

  Lee, M C ^a   Ahn, J W ^a  

^a NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84879023316     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1007/978-3-7985-1783-7_16     Document Type: Conference Paper

References (66)

1. Akagi M, Nakamura T, Matsusue Y, Ueo T, Nishijyo K, Ohnishi E (2000) The bisurface total knee replacement: a unique design for flexion. J Bone Joint Surg Am 82:1626-1633.
2. Archibeck MJ, Jacobs JJ, Black J (2000) Alternate bearing surfaces in total joint arthroplasty: biologic considerations. Clin Orthop 379:12-21.
3. Bal BS, Oonishi H (2003) Ceramic femoral components in total knee replacement. In: Zippel H, Dietrich M (eds): Bioceramics in Joint Arthroplasty. 8th BIOLOX-Symposium Proceedings. Steinkopff-Verlag, Darmstadt, pp135-136.
4. Bal BS, Garino J, Ries M, Rahaman MN (2006) Ceramic materials in total joint arthroplasty. Semin Arthoplasty 17:94-10.
5. Bal BS, Greenberg DD, Buhrmester L, Aleto TJ (2006) Primary TKA with a zirconia ceramic femoral component. J Knee Surg 19:89-93.
6. Barrack RL, Burak C, Skinner HB (2004) Concerns about ceramics in THA. 429:73-79.
7. Bartel DL, Bicknell VL, Wright TM (1986) The effect of conformity, thickness, and material on stresses in ultrahigh molecular weight components for total joint replacement. J Bone Joint Surg Am 68:1041-1051.
8. Benevenia J, Lee FY, Beuchel F, Parsons JR (1998) Pathologic supracondylar fracture due to osteolytic pseudotumor of knee following cementless total knee replacement. J Biomed Mater Res 43:473-477.
9. Bierbaum B, Nairus J, Kuesis D, Morrison JC, Ward D (2002) Ceramic on ceramic bearings in total hip arthroplasty. Clin Orthop 405:158-163.
10. Bourne R, Barrack R, Rorabeck CH, Salehi A and Good V (2005) Arthroplasty options for the young patient. Clin Orthop 416:191-196.
11. Bradford L, Kurland M, Sankaran H (2004) Early failure due to osteolysis in highly crosslinked ultra-high molecular weight polyethylene: a case report. J Bone Joint Surg Am 86:1051-1056.
12. Bradford-Collons L, Baker DA, Graham J (2004) Wear and surface cracking in early retrieved highly crosslinked Durasul acetabular liners. J Bone Joint Surg Am 86:1271-1282.
13. Cales B (2000) Zirconia as a sliding material: histologic, laboratory, and clinical data. Clin Orthop 379:94-112.
14. Clarke IC, Manaka M, Green DD, Williams P, Pezzotti G, Kim YH, Ries M, Sugano N, Sedel L, Delauney C, Nissan BB, Donalson T, Gustafson GA (2003) Current status of zirconia used in total hip implants. J Bone Joint Surg Am 85 (Suppl 4):73-84.
15. Davidson JA (1993) characteristics of metal and ceramic total hip bearing surfaces and their effect on long-term ultra high molecular weight polyethylene wear. Clin Orthop 294:361-378.
16. Digas G, Karrholm J, Thanner J (2003) Highly cross-linked polyethylene in cemented THA: randomized study of 61 hips. Clin Orthop 417:126-138.
17. Engh GA, Dwyer KA, Hanes CK (1988) Polyethylene wear of metal backed tibial components in total and unicompartmental knee prosthesis. J Bone Joint Surg Br 74:9-17.
18. Fruh HJ, Willman G, Pfaff HG (1997) Wear characteristics of ceramic on ceramic for hip endoprostheses. Biomaterials 18:873-876.
19. Good V, Ries M, Barrack RL, Widding K, Hunter D, Heuer D (2003) Reduced wear with oxidized zirconium femoral heads. J Bone Joint Surg Am 85 (Suppl 4):105-110.
20. Hannouche D, Nich C, Bizot P, Meunier A, Nizard R, Sedel L (2003) Fractures of ceramic bearings. Clin Orthop 417:19-26.
21. Hannouche D, Hamadouche M, Nizard R, Bizot P, Meunier A, Sedel L (2005) Ceramics in total hip replacement. Clin Orthop 430:62-71.
22. Heimke G, Leyen S, Willmann G (2002) Knee arthroplasty: recently developed ceramics offer new solutions. Biomaterials 23:1539-1551.
23. Hunter G, Pawar V, Salehi A, Long M (2004) Abrasive wear of modified CoCr and Ti-6Al-4V surfaces against bone cement. In: Shrivatsva S (ed) Medical Device Materials Park, OH, ASM International pp91-97.
24. Insall JN, Aglietti P, Baldini A, Easley ME (2001) Meniscal-bearing knee replacement. In: Insall JN, Scott WN (eds) Surgery of the Knee, Churchill Livingstone, Philadelphia, pp1717-1738.
25. Janssen D, Stolk J, Verdonschot N (2006) Finite element analysis of the long-term fixation strength of cemented ceramic cups. Proc Inst Mech Eng 220:533-539.
26. Korovessis P, Petsinis G, Repanti M (2006) Metallosis after contemporary metal on metal total hip arthroplasty: five to nine year follow-up. J Bone Joint Surg Am 88: 1183-1191.
27. Koshino T, Okamoto R, Takagi T, Yamamoto K, Saito T (2002) Cemented ceramic YMCK total knee arthroplasty in patients with severe rheumatoid arthritis. J Arthroplasty 17:1009-1015.
28. Kovacs P, Davidson JA (1996) Chemical and electrochemical aspects of the biocompatibility of titanium and its alloys, ASTM STP 1272. American Society for Testing and Materials, West Conshohocken, PA, pp163-178.
29. Kuntz M (2006) Validation of a new high performance alumina matrix composite for use in total joint replacement. Semin Arthoplasty 17:141-145.
30. Laskin RS (2003) An oxidized Zr ceramic surfaced femoral component for total knee arthroplasty. Clin Orthop 416:191-196.
31. Laskin RS (2003) The need for alternative bearings. Orthopedics 26:966-968.
32. Leyen S, Vetter S, Plank H (2004) Analysis and investigation of the adhesive strength of ceramic and bone cement in knee arthroplasty. In: Lazennec JY, Dietrich M (eds): Bioceramics in Joint Arthroplasty. 9th BIOLOX-Symposium Proceedings. Steinkopff-Verlag, Darmstadt, pp57-59.
33. Long M, Rieser L, Hunter G (1998) Nana-hardness measurements of oxidized Zr-2.5 Nb and various orthopaedic materials. Trans Soc Biomaterials 21:528.
34. Merkert P (2003) Next generation ceramic bearings. In: Zippel H, Dietrich M (eds):Bioceramics in Joint Arthroplasty. 8th BIOLOX-Symposium Proceedings. Steinkopff- Verlag, Darmstadt, pp123-125.
35. Merkert P, Kuntz M (2006) Future applications in ceramics. In: Benazzo F, Falez F, Dietrich M (eds): Bioceramics in Joint Arthroplasty. 11th BIOLOX-Symposium Proceedings. Steinkopff-Verlag, Darmstadt, pp283-288.
36. Milosev I, Trebse R, Kovac S (2006) Survivorship and retrieval analysis of Sikomet metal on metal total hip replacements at a mean of seven years. J Bone Joint Surg Am 88: 1173-1182.
37. Minoda Y, Kobayashi A, Iwaki H, Miyaguchi M, Kadoya Y, Ohashi H, Takaoka K (2005) Polyethylene wear particle generation in vivo in an alumina medial pivot total knee prosthesis. Biomaterials 26:6034-6040.
38. Mittelmeier W, Ansorge S, Klub D, Kircher J, Bader R (2006) Ceramic knee endoprostheses: reality or future? In: Benazzo F, Falez F, Dietrich M (eds): Bioceramics in Joint Arthroplasty. 11th BIOLOX-Symposium Proceedings. Steinkopff-Verlag, Darmstadt, pp126-131.
39. Muller MP, Degreif J, Rudig L (2004) Friction of ceramic and metal hip hemiendoprostheses against cadaveric acetabula. Arch Orthop Trauma Surg 124:681-687.
40. Nakamura T, Oonishi E, Yasuda T, Nakagawa Y (2004) A new knee prosthesis with bisurface femoral component made of zirconia ceramic. Key Eng Mater 254/256:607-609.
41. Oonish H, Hasegawa T (1981) Cementless alumina ceramic total knee prostheses. Orthop Ceramic Implants 1;157-160.
42. Oonishi H, Aono M, Murata N, Kushitani S (1990) Alumina versus polyethylene in total knee arthroplasty. Clin Orthop 282:95-104.
43. Oonishi H, Fujita H, Itoh S, Kim SC, Amino H (2002) Development and improvement of ceramic TKA for 19 years and clinical results. Key Eng Mater 218/220:479-483.
44. Oonishi H, Fujita H, Itoh S, Amino H, Usuji E (2002) Surface analysis on retrieved ceramic total knee prosthesis. Key Eng Mater 218/220:499-502.
45. Oonishi H, Kim SC, Kyomoto M, Masuda S, Asano T, Clark IC (2005) Changes in UHMWPE properties of retrieved ceramic total knee prosthesis in clinical use for 23 years. J Biomed Mater Res Appl Biomater 74B:754-759.
46. Oonishi H, Kim SC, Iwamoto M, Ueno M (2006) PE wear in ceramic/PE bearing surface in total knee arthroplasty: clinical experiences of more than 24 years. In: Benazzo F, Falez F, Dietrich M (eds): Bioceramics in Joint Arthroplasty. 11th BIOLOX-Symposium Proceedings. Steinkopff-Verlag, Darmstadt, pp101-110.
47. Oonishi H, Kim SC, Kyomoto M, Iwamoto M, Masuda S, Ueno M (2006) Ceramic total knee arthroplasty: advanced clinical experiences of 26 years. Semin Arthoplasty 17:134-140.
48. Pria PD, Giorgini L, Kuntz M, Pandorf T (2006) Ceramic knee design. In: Benazzo F, Falez F, Dietrich M (eds): Bioceramics in Joint Arthroplasty. 11th BIOLOX-Symposium Proceedings. Steinkopff-Verlag, Darmstadt, pp115-123.
49. Ries MD (2006) Oxidized zirconium in total joint arthroplasty. Semin Arthoplasty 17:161-164.
50. Ritter MA, Faris GW (2003) Alternative TKR bearing surfaces: the femur? you have got to be kidding. Orthopedics 26:967-980.
51. Sato T, Shimada M (1984) Crystalline phase change in yttria-partially- stabilized zirconia by low temperature annealing. J Amer Ceram Soc 67:212-213.
52. Sato T, Shimada M (1985) Transformation of yttria-doped tetragonal ZrO2 polycrystals by annealing in water. J Amer Ceram Soc 68: 356-359.
53. Schreiner U, Scheller G (2003) Osseointegration of ceramic implants: past, present and future. In: Zippel H, Dietrich M (eds): Bioceramics in Joint Arthroplasty. 8th BIOLOXSymposium Proceedings. Steinkopff-Verlag, Darmstadt, pp119-122.
54. Sedel L, Nizard R, Bizot P, Meunier A (1998) Perspective on a 20-year experience with ceramic on ceramic articulation in total hip replacement. Semin Arthroplasty 9:123-134
55. Skinner HB (1999) Ceramic bearing surfaces. Clin Orthop 369:83-91.
56. Skinner HB (2006) Ceramics in total joint surgery: the pros and cons. Semin Arthoplasty 17:196-201.
57. Sprague J, Salehi A, Tsai S, Pawar V, Thomas R, Hunter G (2004) Mechanical behavior of zirconia, alumina, and oxidized zirconium modular heads. In: Brown S, Clarke IC, Gustafson A (eds) ISTA 2003, vol 2. International Society for Technology in Arthroplasty, Birmingham, AL, pp31-36.
58. Thomsen M, Thomas P (2006) Hypersensitivity reactions in association to arthroplasty. In: Benazzo F, Falez F, Dietrich M (eds): Bioceramics in Joint Arthroplasty. 11th BIOLOXSymposium Proceedings. Steinkopff-Verlag, Darmstadt, pp111-113.
59. Tsai S, Sprague J, Hunter G, Thomas R, Salehi A (2001) Mechanical testing and finite element analysis of oxidized zirconium femoral components. Trans Soc Biomaterials 24:163.
60. Tsukamoto R, Chen S, Asano T, Ogino M, Shoji H, Nakamura T, Clarke IC (2006) Improved wear performance with crosslinked UHMWPE and zirconia implants in knee simulation. Acta Orthopaedica 77:505-511.
61. Ueno M, Ikeuchi K, Nakamura T, Akagi M (2003) Comparison of the wear properties of polyethylene plate in total knee prostheses using different femoral component material. Key Eng Mater 240/242:801-804.
62. Walter A (1992) On the material and the tribology of alumina-alumina couplings for hip joint prostheses. Clin Orthop 282:31-46.
63. Willmann G (1998) Ceramics for total hip replacement: what a surgeon should know. Orthopedics 21:173-177.
64. Won CH, Rohatgi S, Kraay MJ (2000) Effect of resin type and manufacturing method on wear of polyethylene tibial components. Clin Orthop 376:161-171.
65. Yasuda K (2004) Long-term clinical results of cruciate-retaining total knee arthroplasty using the alumina ceramic condylar prosthesis. Scientific Exhibit No. SE035. AAOS Meeting, San Francisco.
66. Yoshimura M, Noma T, Kawabata K, Somiya S (1987) Role of H2O on the degradation process of Y-TZP. J Mater Sci Lett 6:465.