Zirconia as a sliding material: Histologic, laboratory, and clinical data

Clinical Orthopaedics and Related Research

Volumn , Issue 379, 2000, Pages 94-112

  Cales, Bernard ^a  

^a Norton Desmarquest Fine Ceramics   (France)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM OXIDE; ZIRCONIUM OXIDE;

BIOCOMPATIBILITY; BIOMECHANICS; CERAMIC PROSTHESIS; CONFERENCE PAPER; FEMUR FRACTURE; FEMUR HEAD; HUMAN; PRIORITY JOURNAL; RADIOACTIVITY; SCRATCHING; TOTAL HIP PROSTHESIS;

EID: 0033771089     PISSN: 0009921X     EISSN: 15281132     Source Type: Journal    
DOI: None     Document Type: Conference Paper

References (76)

1. Voisin MC: Poor eight-year survival of cemented zirconia-polyethylene total hip replacements
2. Differences in polyethylene wear between ceramic and metal on polyethylene hip prosthesis. A biopsy and postmortem study
3. Arthroplastie totale de la hanche par prothese en alumine frittee
4. The use of dense alumina-alumina ceramic combination in total hip replacement
5. Quantitative comparison of volumetric wear using 22mm, 26mm and 32mm femoral heads: A hip simulator study
6. GSP-Made Ca-PSZ for Biomedical Applications
7. Y-TZP Zirconia Ceramic Hip Joint Heads. Key-Issues for a High Reliability
8. Marking of Ceramic Femoral Heads
9. Risks and advantages in standardization of bores and cones for heads in modular hip prostheses
10. Fracture ratio of zirconia hip joint heads compared to other ceramic bearing system systems
11. Mechanical properties and surface analysis of retrieved zirconia hip joint heads after an implantation time of two to three years
12. Yttria-Stabilized Zirconia for Improved Orthopedic Prostheses
13. Radioactivity of Zirconia Ceramics and Other Hip Joint Components
14. Long term in-vivo and in-vitro aging of a zirconia ceramic used in orthopaedy
15. Radioactivity Measurements of Zirconia Powders
16. Drouin JM: Low temperature aging of Y-TZP ceramics
17. Crack propagation behaviour of Y-TZP ceramics
18. The second generation of ceramics for total hip replacement
19. Mechanical properties and short term in-vivo evaluation of yttrium-oxide-partially-stabilized zirconia
20. Influence of THR ball diameter on polyethylene wear rates
21. Ceramic bearing surfaces in total artificial joints
22. In vitro evaluation of the mutagenic and carcinogenic power of high purity zirconia ceramic
23. Zirconia ceramics or 'by night, all cats are grey'
24. Characteristics Of metal and ceramic total hip bearing surfaces and their effect on long term UHMWPE
25. Sliding friction and UHMWPE wear comparison between cobalt alloy and zirconia ceramics
26. Comparative study of the wear of UHMWPE with zirconia ceramic and stainless steel femoral heads in artificial hip joints
27. The color of medical-grade zirconia (Y-TZP)
28. Examination of retrieved hip prosthesis: Wear of alumina/alumina components
29. Yttria-stabilized zirconia ceramic for improved hip joint heads
30. In vitro ageing of yttria-stabilized zirconia
31. Ceramic femoral head fractures in total hip arthroplasty
32. Biocompatibility of magnesia-partially stabilized zirconia (Mg-PSZ) ceramics
33. Five years experience with ceramic-metal-composites hip endoprostheses
34. Radioactivity of zirconia ceramic used for femoral heads
35. About radioactivity of some PMMA bone cements
36. Results versus wear couple
37. In vitro reactions of human osteoblasts in culture with zirconia and alumina ceramics
38. Effect of protein lubrication on the wear properties of materials for prosthetic joints
39. Potential thermal artifact in hip joint wear simulators
40. Biological response to calcia-partially stabilized zirconia ceramics
41. Wear debris
42. Friction, lubrification and wear of cobalt-chromium, alumina and zirconia hip prostheses compared on a joint simulator
43. Spontaneous fracture of the ceramic ball in a ceramic-polyethylene total hip arthroplasty
44. Zirconia/zirconium: A new abrasion resistant material for orthopedic applications
45. Investigation of the Wear Behavior of Ceramic on Ceramic Combinations in Total Hip Prostheses
46. Forces transmitted by joints in the human body
47. Effect of ceramic precursors on human lymphocite mitogenesis
48. The fallacy of evaluating biomaterial wear-rates with water as lubricant: A hip simulator study of alumina-PTFE and Co-Cr-PFTE combinations
49. Zirconia as a ceramic biomaterial
50. Radiation risk estimation based on activity measurements of zirconium oxide implants
51. Comparison of the inflammatory potential of ceramic particles in the rat air-pouch model. Effect of dose, nature and size
52. Ceramic endoprostheses in total hip arthroplasty
53. Tissue-biomaterial interface characteristics of zirconia ceramics
54. Predicting the clinical wear performance of orthopaedic bearing surfaces
55. The relationship between the design, position and articular wear of acetabular components inserted without cement and the development of pelvic osteolysis
56. The mechanism of loosening of cemented acetabular components in total hip arthroplasty. Analysis of specimens retrieved at autopsy
57. Perspective of a 20-year experience with ceramic-on-ceramic articulation in total hip replacement
58. Alumina-alumina hip replacement in patients younger than 50 years old
59. Time-dependent changes in the mechanical properties of zirconia ceramics
60. Low temperature degradation of Y-TZP materials
61. Mechanical behaviour of zirconia and zirconia toughened alumina in a simulated body environment
62. Martensite transformation behaviour during isothermal ageing in partially stabilized zirconia with and without alumina addition
63. Ceramic-ceramic bearing systems for THP with zirconia heads
64. The effect of the surface finish of alumina and stainless steel on the wear rate of UHMWPE
65. Pfaff HG: Wear characteristics of sliding pairs of zirconia (Y-TZP) for hip endoprostheses
66. Comparison of alumina polyethylene and metal polyethylene in clinical trials