Target-focused local workspace modeling for construction automation applications

Journal of Computing in Civil Engineering

Volumn 26, Issue 5, 2012, Pages 661-670

  Cho, Yong K ^a   Wang, Chao ^a   Tang, Pingbo ^b,c   Haas, Carl T ^d  

^a UNIVERSITY OF NEBRASKA LINCOLN   (United States)

^b Arizona State University   (United States)

^c Western Michigan University   (United States)

^d UNIVERSITY OF WATERLOO   (Canada)

Author keywords

Accuracy; Automation; Construction management; Data collection; Data processing; Lasers; Measurement; Robotics; Three dimensional analysis; Three dimensional models

Indexed keywords

ACCURACY; CONSTRUCTION MANAGEMENT; DATA COLLECTION; THREE-DIMENSIONAL ANALYSIS; THREE-DIMENSIONAL MODEL;

AUTOMATION; DATA ACQUISITION; DATA PROCESSING; LASERS; MEASUREMENTS; OPTICAL RADAR; PROJECT MANAGEMENT; SCANNING; THREE DIMENSIONAL;

ROBOTICS;

EID: 84878346155     PISSN: 08873801     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CP.1943-5487.0000166     Document Type: Article

References (42)

1. Acuity. (2012). " Signal strength and the impact on accuracy." 〈 http://www.acuitylaser.com/resources/performance.html 〉 (Jun. 15, 2012).
2. Akinci, B., Boukamp, F., Gordon, C., Huber, D., Lyons, C., and, Park, K. (2006). " A formalism for utilization of sensor systems and integrated project models for active construction quality control." Automat. Constr. 0926-5805, 15 (2), 124-138. 10.1016/j.autcon.2005.01.008
3. Alba, M., Fregonese, L., Prandi, F., Scaioni, M., and, Valgoi, P. (2006). " Structural monitoring of a large dam by terrestrial laser scanning." Proc. ISPRS Commission V Symp., ISPRS, Dresden, Germany.
4. Anderson, D., Herman, H., and, Kelly, A. (2005). " Experimental characterization of commercial flash ladar devices." Proc. Int. Conf. Sensing and Technol., IEEE, Palmerston North, New Zealand.
5. Atasoy, G., Tang, P., and, Akinci, B. (2009). " A comparative study on the use of laser scanners for construction quality control and progress monitoring purposes." CIB W078 26th Int. Conf.-Managing IT in Construction, International Council for Building, Rotterdam, The Netherlands.
6. Brilakis, I.,. (2010). " Toward automated generation of parametric BIMs based on hybrid video and laser scanning data." Adv. Eng. Inform. 1474-0346, 24 (4), 456-465. 10.1016/j.aei.2010.06.006
7. Cho, Y. K., Haas, C. T., Liapi, K., and, Sreenivasan, S. (2002). " A framework for rapid local area modeling for construction automation." Automat. Constr. AUCOES 0926-5805, 11 (6), 629-641. 10.1016/S0926-5805(02)00004- 3
8. Cho, Y. K., and, Martinez, D. (2009). " Light-weight 3D LADAR system for construction robotic operations." 26th Int. Symp. on Automation and Robotics in Construction, IAARC, Austin, TX, 237-244.
9. Cho, Y. K., Youn, J. H., and, Martinez, D. (2010). " Error modeling for an untethered ultra-wideband system for construction indoor asset tracking." Automat. Constr. AUCOES 0926-5805, 19 (1), 43-54. 10.1016/j.autcon.2009.08.001
10. Dai, F., and, Lu, M. (2010). " Assessing the accuracy of applying photogrammetry to take geometric measurements on building products." J. Constr. Eng. Manage. 0733-9364, 136 (2), 242-250. 10.1061/(ASCE)CO.1943-7862. 0000114
11. DirectIndustry. (2010). " Handheld laser scanners." 〈 http://www.directindustry.com/industrial-manufacturer/handheld-laser-scanner- 75269.html 〉 (Jan. 3, 2010).
12. El-Hakim, S., Beraldin, J., Remondino, F., Picard, M., Cournoyer, L., and, Baltsavias, E. (2008). " Using terrestrial laser scanning and digital images for 3D modelling of the Erechtheion, acropolis of Athens." Proc. of Digital Media and its Applications in Cultural Heritage (DMACH) Conf., WIT Press, Southampton, U.K., 3-16.
13. FARO Technology Ltd. (2010). " FARO focus 3D data sheet." 〈 http://www.ats.se/data/FocUsTechSheet.pdf 〉 (Mar. 9, 2011).
14. FIATECH. (2010). " Integrated construction planning with SmartPlant® construction 2010." 〈 http://fiatech.org/webinar- archives/483-may-11.html 〉 (May 18, 2010).
15. Golparvar-Fard, M., Peña-Mora, F., and, Savarese, S. (2009). " Monitoring of construction performance using daily progress photograph logs and 4D as-planned models." Proc. 2009 ASCE Int. Workshop Comput. Civ. Eng., ASCE, Washington, D.C., 53-63.
16. Gong, J., and, Caldas, C. H. (2008). " Data processing for real-time construction site spatial modeling." Automat. Constr. AUCOES 0926-5805, 17 (5), 526-535. 10.1016/j.autcon.2007.09.002
17. Gordon, C., Boukamp, F., Huber, D., Latimer, E., Park, K., and, Akinci, B. (2003). " Combining reality capture technologies for construction defect detection: A case study." Proc., EuropIA.9: E-Activities in Building Design and Construction, EuropIA, Istanbul, Turkey, 99-108.
18. Joshua, L., and, Varghese, K. (2010). " Accelerometer based activity recognition in construction." J. Comput. Civ. Eng. JCCEE5 0887-3801, 25 (5), 370.
19. Kemeny, J., and, Turner, K. (2008). " Ground-based LiDAR rock slope mapping and assessment." Technical Rep. FHWA-CFL/TD-08-006, Central Federal Lands Highway Division, Lakewood, CO.
20. Kwon, S.-W., Bosche, F., Kim, C., Haas, C. T., and, Liapi, K. A. (2004). " Fitting range data to primitives for rapid local 3D modeling using sparse range point clouds." Autom. Constr., 13 (1), 67-81. 10.1016/j.isprsjprs. 2010.06.003 AUCOES 0926-5805
21. Linder, W. (2003). Digital photogrammetry: Theory and applications, Springer-Verlag, New York.
22. Luhmann, T. (2010). " Close range photogrammetry for industrial applications." ISPRS J. Photogramm. IRSEE9 0924-2716, 65 (6), 558-569. 10.1016/j.isprsjprs.2010.06.003
23. Mesa Imaging. (2012). " SR4000 data sheet." 〈 http://www.mesa-imaging.ch/Prodview4k.php 〉 (Dec. 8, 2010).
24. Mills, J., and, Barber, D. (2004). " Geomatics techniques for structural surveying." J. Surv. Eng. JSUED2 0733-9453, 130 (2), 56-64. 10.1061/(ASCE)0733-9453(2004)130:2(56)
25. Paul, R. P. (1981). Robot manipulators: Mathematics, programming, and control (artificial intelligence), MIT Press, Cambridge, MA.
26. Rebolj, D., Babič, N. Č., Magdič, A., Podbreznik, P., and, Pšunder, M. (2008). " Automated construction activity monitoring system." Adv. Eng. Inform. 1474-0346, 22 (4), 493-503. 10.1016/j.aei.2008.06.002
27. Smith, J. (2011). " Handheld 3D scanner-affordable and easy form of 3D scanning system." Ezine Articles, 〈 http://ezinearticles.com/? Handheld-3D-Scanner - -Affordable-and-Easy-Form-of-3D-Scanning-System&id= 1460968 〉 (Jan. 3, 2011).
28. Sprovieri, J. (2004). " X-Y-Z: Vision systems help robots find, assemble parts." Assembly Magazine, 〈 http://www.assemblymag.com/ Articles/Column/bc0975c53f5c9010VgnVCM100000f932a8c0---- 〉 (Apr. 1, 2004).
29. Stone, W. C., Juberts, M., Dagalakis, N., Stone, J., and, Gorman, J. (2004). " Performance analysis of next-generation LADAR for manufacturing, construction, and mobility." NIST Interagency/Internal Report (NISTIR)-7117, Gaithersburg, MD.
30. Su, Y. Y., Hashash, Y. M. A., and, Liu, L. Y. (2006). " Integration of construction as-built data via laser scanning with geotechnical monitoring of urban excavation." J. Constr. Eng. Manage. 0733-9364, 132 (12), 1234-1241. 10.1061/(ASCE)0733-9364(2006)132:12(1234)
31. Szabo, S., Falco, J., and, Norcross, R. (2009). " An independent measurement system for testing automotive crash warning systems." NIST Interagency/Internal Rep. (NISTIR) 7545, Gaithersburg, MD.
32. Tang, P., Akinci, B., and, Huber, D. (2009). " Quantification of edge loss of laser scanned data at spatial discontinuities." Automat. Constr. AUCOES 0926-5805, 18 (8), 1070-1083. 10.1016/j.autcon.2009.07.001
33. Tang, P., Akinci, B., and, Huber, D. (2010 a). " Semi-automated as-built modeling of light rail system guide beams." Construction Research Congress, ASCE, Banff, Canada, 122-131.
34. Tang, P., Huber, D., and, Akinci, B. (2010 b). " Characterization of laser scanners and algorithms for detecting flatness defects on concrete surfaces." J. Comput. Civ. Eng. JCCEE5 0887-3801, 25 (1), 31-42. 10.1061/(ASCE)CP.1943-5487.0000073
35. Tantisevi, K., and, Akinci, B. (2007). " Automated generation of workspace requirements of mobile crane operations to support conflict detection." Automat. Constr. AUCOES 0926-5805, 16 (3), 262-276. 10.1016/j.autcon.2006.05.007
36. Teizer, J., Allread, B. S., Fullerton, C. E., and, Hinze, J. (2010). " Autonomous pro-active real-time construction worker and equipment operator proximity safety alert system." Automat. Constr. AUCOES 0926-5805, 19 (5), 630-640. 10.1016/j.autcon.2010.02.009
37. Teizer, J., Caldas, C. H., and, Haas, C. T. (2007). " Real-time three-dimensional occupancy grid modeling for the detection and tracking of construction resources." J. Constr. Eng. Manage. 0733-9364, 133 (11), 880-888. 10.1061/(ASCE)0733-9364(2007)133:11(880)
38. Urmson, C.,. (2009). " Autonomous driving in traffic: Boss and the urban challenge." AI Magazine AIMAEK, 30 (2), 17-29.
39. Vandapel, N., Huber, D. F., Kapuria, A., and, Hebert, M. (2004). " Natural terrain classification using 3-d ladar data." Proc. IEEE Int. Conf. Robot. Autom., IEEE, Barcelona, Spain, 5117-5122.
40. Wu, W., Yang, H., Chew, D. A. S., Yang, S., Gibb, A. G. F., and, Li, Q. (2010). " Towards an autonomous real-time tracking system of near-miss accidents on construction sites." Automat. Constr. AUCOES 0926-5805, 19 (2), 134-141. 10.1016/j.autcon.2009.11.017
41. Z Corporation (2011). " ZScanner." 〈 http://zscanner.com/ en/Products/3D-Scanners/ZScannerandtRade-700/Self-Positioning/spage.aspx 〉 (Jan. 3, 2011).
42. Zeibak, R., and, Filin, S. (2009). " Object extraction from terrestrial laser scanning data." FIG Working Week, FIG, Eilat, Israel.