Influence of the processing route of porcelain/Ti-6Al-4V interfaces on shear bond strength

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 20, Issue , 2013, Pages 327-337

  Toptan, Fatih ^a   Alves, Alexandra C ^a   Henriques, Bruno ^a   Souza, Júlio C M ^a,b,c   Coelho, Rui ^d   Silva, Filipe S ^a   Rocha, Luís A ^a   Ariza, Edith ^a  

^a UNIVERSITY OF MINHO   (Portugal)

^b UNIVERSIDADE FERNANDO PESSOA   (Portugal)

^c FEDERAL UNIVERSITY OF RIO GRANDE DO NORTE   (Brazil)

^d Private practice at Clinica Medica das Antas   (Portugal)

Author keywords

Dental porcelain; Hot pressing; Metal porcelain interface; Shear bond strength; Titanium alloy

Indexed keywords

CONTROLLED CONDITIONS; DENTAL PORCELAIN; ENERGY DISPERSIVE X RAY SPECTROSCOPY; FIELD EMISSION GUN SCANNING ELECTRON MICROSCOPE; PORCELAIN FUSED TO METALS; SHEAR BOND STRENGTHS; SIGNIFICANT DIFFERENCES; STATISTICALLY SIGNIFICANT DIFFERENCE;

ALUMINA; ALUMINUM; BLASTING; COOLING; HOT PRESSING; PORCELAIN; PROCESSING; SCANNING ELECTRON MICROSCOPY; SILICA; SURFACE TREATMENT; TITANIUM ALLOYS; X RAY SPECTROSCOPY;

BOND STRENGTH (MATERIALS);

ALUMINUM; SILICON; TITANIUM;

ARTICLE; BIOPOLISHING; CERAMICS; CHEMICAL BOND; CHEMICAL COMPOSITION; COOLING; DENTAL PORCELAIN; ENERGY DISPERSIVE X RAY SPECTROSCOPY; EVALUATION; FIELD EMISSION GUN SCANNING ELECTRON MICROSCOPY; FURNACE; HARDNESS; MICROSCOPY; PRIORITY JOURNAL; SHEAR STRENGTH; SPECTROSCOPY; TENSILE STRENGTH; VACUUM; YOUNG MODULUS;

ADHESIVENESS; DENTAL PORCELAIN; HOT TEMPERATURE; MATERIALS TESTING; SHEAR STRENGTH; SURFACE PROPERTIES; TITANIUM;

EID: 84875871869     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2013.02.003     Document Type: Article

References (54)

1. Akova T., Ucar Y., Tukay A., Balkaya M.C., Brantley W.A. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dental Materials 2008, 24:1400-1404.
2. Al Jabbari Y.S., Zinelis S., Eliades G. Effect of sandblasting conditions on alumina retention in representative dental alloys. Dental Materials Journal 2012, 31(2):249-255.
3. Anusavice K.J., Dehoff P.H., Fairhurst C.W. Comparative evaluation of ceramic-metal bond tests using finite element stress analysis. Journal of Dental Research 1980, 59:608-613.
4. Anusavice K.J., Kakar K., Ferree N. Which mechanical and physical testing methods are relevant for predicting the clinical performance of ceramic-based dental prostheses?. Clinical Oral Implants Research 2007, 18(Suppl. 3):218-231.
5. ASM Inc., 2012. http://asm.matweb.com/search/SpecificMaterial.asp?bassnum=MTP641%20(January,%202012.
6. 2 intermediate coatings on bond strength of titanium and Ti-6Al-4V alloy to dental porcelain. Dental Materials 2009, 25:1128-1135.
7. Boeckler A.F., Lee H., Stadler A., Setz J.M. Prospective observation of CAD/CAM titanium ceramic single crowns: a three-year follow up. Journal of Prosthetic Dentistry 2009, 102:290-297.
8. Bondioli I.R., Bottino M.A. Evaluation of shear bond strength at the interface of two porcelains and pure titanium injected into the casting mold at three different temperatures. Journal of Prosthetic Dentistry 2004, 91:541-547.
9. Chakmakchi M., Eliades G., Zinelis S. Bonding agents of low fusing cpTi porcelains: elemental and morphological characterization. Journal of Prosthodontic Research 2009, 53:166-171.
10. Crook P. Cobalt and Cobalt Alloys. ASM Handbook 1991, vol. 2. ASM International, Metals Park, Ohio, pp. 446-454. 10th edition.
11. de Melo R.M., Travassos A.C., Neisser M.P. Shear bond strengths of a ceramic system to alternative metal alloys. Journal of Prosthetic Dentistry 2005, 93:64-69.
12. Dérand T., Hero H. Bond strength of porcelain on cast vs. wrought titanium. Scandinavian Journal of Dental Research 1992, 100:184-188.
13. dos Santos J.G., Fonseca R.G., Adabo G.L., Cruz C.A.S. Shear bond strength of metal-ceramic repair systems. Journal of Prosthetic Dentistry 2006, 96:165-173.
14. Elsaka S.E., Hamouda I.M., Elewady Y.A., Abouelatta O.B., Swain M.V. Effect of chromium interlayer on the shear bond strength between porcelain and pure titanium. Dental Materials 2010, 26:793-798.
15. Fonseca J.C., Henriques G.E.P., Sobrinho L.C., de Góes M.F. Stress-relieving and porcelain firing cycle influence on marginal fit of commercially pure titanium and titanium-aluminum-vanadium copings. Dental Materials 2003, 19:686-691.
16. Fredericci C., Yoshimura H.N., Molisani A.L., Pinto M.M., Cesar P.F. Effect of temperature and heating rate on the sintering of leucite-based dental porcelains. Ceramics International 2011, 37:1073-1078.
17. Furuhashi K., Uo M., Kitagawa Y., Watari F. Rapid and non-destructive analysis of metallic dental restorations using X-ray fluorescence spectra and light-element sampling tools. Applied Surface Science 2012, 262:13-18.
18. Garbelini W.J., Henriques G.E.P., Troia M., Mesquita M.F., Dezan C.C. Evaluation of low-fusing ceramic systems combined with titanium grades II and V by bending test and scanning electron microscopy. Journal of Applied Oral Science 2003, 11(4):354-360.
19. Graham J.D., Johnson A., Wildgoose D.G., Shareef M.Y., Cannavina G. The effect of surface treatments on the bond strength of a nonprecious alloy-ceramic interface. International Journal of Prosthodontics 1999, 12:330-334.
20. Henriques B., Soares D., Silva F.S. Shear bond strength of a hot pressed Au-Pd-Pt alloy-porcelain dental composite. Journal of Mechanical Behavior of Biomedical Materials 2011, 4:1718-1726.
21. Henriques B., Soares D., Silva F.S. Microstructure, hardness, corrosion resistance and porcelain shear bond strength comparison between cast and hot pressed CoCrMo alloy for metal-ceramic dental restorations. Journal of Mechanical Behavior of Biomedical Materials 2012, 12:83-92.
22. Henriques B., Soares D., Silva F.S. Optimization of bond strength between gold alloy and porcelain through a composite interlayer obtained by powder metallurgy. Materials Science and Engineering A 2011, 528:1415-1420.
23. Ho W.-F., Chiang T.-Y., Wu S.-C., Hsu H.-C. Evaluation of low-fusing porcelain bonded to dental cast Ti-Cr alloys. Journal of Alloys and Compounds 2009, 474:505-509.
24. Homann F., Waddell J.N., Swain M.V. Influence of water, loading rate and bonder on the adhesion of porcelain to titanium. Journal of Dentistry 2006, 34:485-490.
25. Höland W., Rheinberger V., Apel E., Ritzberger C., Rothbrust F., Kappert H., Krumeich F., Nesper R. Future perspectives of biomaterials for dental restoration. Journal of European Ceramic Society 2009, 29:1291-1297.
26. Işeri U., Özkurt Z., Kazaoǧlu E. Shear bond strengths of veneering porcelain to cast, machined and laser-sintered titanium. Dental Materials Journal 2011, 30(3):274-280.
27. Johnson T., van Noort R., Stokes C.W. Surface analysis of porcelain fused to metal systems. Dental Materials 2006, 22:330-337.
28. Joias R.M., Tango R.N., de Araujo J.E.J., de Araujo M.A.J., Saavedra G.S.F.A., Paes-Junior T.J.A., Kimpara E.T. Shear bond strength of a ceramic to Co-Cr alloys. Journal of Prosthetic Dentistry 2008, 99:54-59.
29. Kara H.B., Ozturk A.N., Aykent F., Koc O., Ozturk B. The effect of different surface treatments on roughness and bond strength in low fusing ceramics. Lasers in Medical Science 2011, 26:599-604.
30. Keramit750, 2012. http://www.nobilmetal.it/public/products_attach/2010-keramit_750_eng.pdf%20(September,%202012).
31. Kern M., Thompson V.P. Effects of sandblasting and silica-coating procedures on pure titanium. Journal of Dentistry 1994, 22:300-306.
32. Kim J.-T., Cho S.-A. The effects of laser etching on shear bond strength at the titanium ceramic interface. Journal of Prosthetic Dentistry 2009, 101:101-106.
33. Korkmaz T., Asar V. Comparative evaluation of bond strength of various metal-ceramic restorations. Materials & Design 2009, 30:445-451.
34. Lampman S. Wrought Titanium and Titanium Alloys. ASM Handbook 1990, vol. 2. ASM International, Metals Park, Ohio, pp. 592-633. 10th edition.
35. Özcan I., Uysal H. Effects of silicon coating on bond strength of two different titanium ceramic to titanium. Dental Materials 2005, 21:773-779.
36. Papadopoulos T.D., Spyropoulos K.D. The effect of a ceramic coating on the cpTi-porcelain bond strength. Dental Materials 2009, 25:247-253.
37. Piattelli A., Degidi M., Paolantonio M., Mangano C., Scarano.A. Residual aluminum oxide on the surface of titanium implants has no effect on osseointegration. Biomaterials 2003, 24:4081-4089.
38. Roberts H.W., Berzins D.W., Moore B.K., Charlton D.G. Metal-ceramic alloys in dentistry: a review. Journal of Prosthod 2009, 18:188-194.
39. Shokry T.E., Attia M., Mosleh I., Elhosary M., Hamza T., Shen C. Effect of metal selection and porcelain firing on the marginal accuracy of titanium-based metal ceramic restorations. Journal of Prosthetic Dentistry 2010, 103:45-52.
40. Silva F.S. Fatigue crack propagation after overloading and underloading at negative stress ratios. International Journal of Fatigue 2007, 29:1757-1771.
41. Souza J.C.M., Nascimento R.M., Martinelli A.E. Characterization of dental metal-ceramic interfaces immersed in artificial saliva after substructural mechanical metallization with titanium. Surface and Coatings Technology 2010, 205:787-792.
42. Suansuwan N., Swain M.V. Adhesion of porcelain to titanium and a titanium alloy. Journal of Dentistry 2003, 31:509-518.
43. Tan J.P., Sederstrom D., Polansky J.R., McLaren E.A., White S.N. The use of slow heating and slow cooling regimens to strengthen porcelain fused to zirconia. Journal of Prosthetic Dentistry 2012, 107:163-169.
44. Tholey M.J., Waddell J.N., Swain M.V. Influence of the bonder on the adhesion of porcelain to machined titanium as determined by the strain energy release rate. Dental Materials 2007, 23:822-828.
45. Triceram Bonder Porcelain Technical Data Sheet, 2012. http://www.dentaurum.de/chs/download-direkt-15537.aspx?docid=617%20(November,%202012).
46. Tróia M.G., Henriques G.E.P., Nóbilo M.A.A., Mesquita M.F. The effect of thermal cycling on the bond strength of low-fusing porcelain to commercially pure titanium and titanium-aluminium-vanadium alloy. Dental Materials 2003, 19:790-796.
47. Ucar Y., Aksahin Z., Kurtoglu C. Metal ceramic bond after multiple castings of base metal alloy. Journal of Prosthetic Dentistry 2009, 102:165-171.
48. Vásquez V.Z.C., Özcan M., Kimpara E.T. Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading. Dental Materials 2009, 25:221-231.
49. Wagner W.C., Asgar K., Bigelow W.C., Flinn R.A. Effect of interfacial variables on metal-porcelain bonding. Journal of Biomedical Materials Research 1993, 27:531-537.
50. Walton T.R., O'Brien W.J. Thermal stress failure of porcelain bonded to a palladium-silver alloy. Journal of Dental Research 1985, 64:476-480.
51. Wang C.-S., Chen K.-K., Tajima K., Nagamatsu Y., Kakigawa H., Kozono Y. Effects of sandblasting media and steam cleaning on bond strength of titanium-porcelain. Dental Materials Journal 2010, 29(4):381-391.
52. Yamada K., Onizuka T., Sumii T., Swain M.V. The effect of GoldbonderTM on the adhesion between porcelain and pure titanium. Journal of Oral Rehabilitation 2004, 31:775-784.
53. Zhang H., Guo T.W., Song Z.X., Wang X.J., Xu K.W. The effect of ZrSiN diffusion barrier on the bonding strength of titanium porcelain. Surface and Coatings Technology 2007, 201:5637-5640.
54. Zinelis S., Barmpagadaki X., Vergos V., Chakmakchi M., Eliades G. Bond strength and interfacial characterization of eight low fusing porcelains to cp Ti. Dental Materials 2010, 26:264-273.