메뉴 건너뛰기




Volumn 238, Issue , 2013, Pages 77-90

Twin screw granulation using conveying screws: Effects of viscosity of granulation liquids and flow of powders

Author keywords

DEM; PIV; Regime map; Twin screw; Viscosity; Wet granulation

Indexed keywords

DEM; PIV; REGIME MAP; TWIN SCREW; WET GRANULATION;

EID: 84875593488     PISSN: 00325910     EISSN: 1873328X     Source Type: Journal    
DOI: 10.1016/j.powtec.2012.05.045     Document Type: Article
Times cited : (111)

References (32)
  • 1
    • 0028089588 scopus 로고
    • Agglomerate strength measurement using a uniaxial confined compression test
    • Adams M.J., Mullier M.A., et al. Agglomerate strength measurement using a uniaxial confined compression test. Powder Technology 1994, 78(1):5-13.
    • (1994) Powder Technology , vol.78 , Issue.1 , pp. 5-13
    • Adams, M.J.1    Mullier, M.A.2
  • 2
    • 0041734305 scopus 로고    scopus 로고
    • Measuring of velocity distributions in the nip region of a co-rotating twin-screw extruder
    • Bakalis S., Karwe M.V. Measuring of velocity distributions in the nip region of a co-rotating twin-screw extruder. Food and Bioproducts Processing 1999, 77(3):205-212.
    • (1999) Food and Bioproducts Processing , vol.77 , Issue.3 , pp. 205-212
    • Bakalis, S.1    Karwe, M.V.2
  • 3
    • 0036497744 scopus 로고    scopus 로고
    • Velocity distributions and volume flow rates in the nip and translational regions of a co-rotating, self-wiping, twin-screw extruder
    • Bakalis S., Karwe M.V. Velocity distributions and volume flow rates in the nip and translational regions of a co-rotating, self-wiping, twin-screw extruder. Journal of Food Engineering 2002, 51(4):273-282.
    • (2002) Journal of Food Engineering , vol.51 , Issue.4 , pp. 273-282
    • Bakalis, S.1    Karwe, M.V.2
  • 4
    • 4544387833 scopus 로고    scopus 로고
    • On-line monitoring of the residence time distribution along a kneading block of a twin-screw extruder
    • Carneiro O.S., Covas J.A., et al. On-line monitoring of the residence time distribution along a kneading block of a twin-screw extruder. Polymer Testing 2004, 23(8):925-937.
    • (2004) Polymer Testing , vol.23 , Issue.8 , pp. 925-937
    • Carneiro, O.S.1    Covas, J.A.2
  • 5
    • 0000496231 scopus 로고
    • Evaluating flow properties of solids
    • Carr R.L. Evaluating flow properties of solids. Chemical Engineer 1965, (72):163-168.
    • (1965) Chemical Engineer , Issue.72 , pp. 163-168
    • Carr, R.L.1
  • 6
    • 78649809238 scopus 로고    scopus 로고
    • Granule nucleation and growth: competing drop spreading and infiltration processes
    • Charles-Williams H.R., Wengeler R., et al. Granule nucleation and growth: competing drop spreading and infiltration processes. Powder Technology 2011, 206(1-2):63-71.
    • (2011) Powder Technology , vol.206 , Issue.1-2 , pp. 63-71
    • Charles-Williams, H.R.1    Wengeler, R.2
  • 7
    • 78649827950 scopus 로고    scopus 로고
    • Wet granulation in laboratory scale high shear mixers: effect of binder properties
    • Chitu T.M., Oulahna D., et al. Wet granulation in laboratory scale high shear mixers: effect of binder properties. Powder Technology 2010, 206(1-2):25-33.
    • (2010) Powder Technology , vol.206 , Issue.1-2 , pp. 25-33
    • Chitu, T.M.1    Oulahna, D.2
  • 8
    • 0018441375 scopus 로고
    • A discrete numerical model for granular assemblies
    • Cundall P.A., Strack O.D.L. A discrete numerical model for granular assemblies. Geotechnique 1979, 29(1):47-65.
    • (1979) Geotechnique , vol.29 , Issue.1 , pp. 47-65
    • Cundall, P.A.1    Strack, O.D.L.2
  • 9
    • 79955391839 scopus 로고    scopus 로고
    • Twin screw wet granulation: effect of powder feed rate
    • Dhenge R.M., Cartwright J.J., et al. Twin screw wet granulation: effect of powder feed rate. Advanced Powder Technology 2011, 22(2):162-166.
    • (2011) Advanced Powder Technology , vol.22 , Issue.2 , pp. 162-166
    • Dhenge, R.M.1    Cartwright, J.J.2
  • 10
    • 77958152375 scopus 로고    scopus 로고
    • Twin screw wet granulation: granule properties
    • Dhenge R.M., Fyles R.S., et al. Twin screw wet granulation: granule properties. Chemical Engineering Journal 2010, 164(2-3):322-329.
    • (2010) Chemical Engineering Journal , vol.164 , Issue.2-3 , pp. 322-329
    • Dhenge, R.M.1    Fyles, R.S.2
  • 11
    • 55749091428 scopus 로고    scopus 로고
    • Impact of screw elements on continuous granulation with a twin-screw extruder
    • Djuric D., Kleinebudde P. Impact of screw elements on continuous granulation with a twin-screw extruder. Journal of Pharmaceutical Sciences 2008, 97(11):4934-4942.
    • (2008) Journal of Pharmaceutical Sciences , vol.97 , Issue.11 , pp. 4934-4942
    • Djuric, D.1    Kleinebudde, P.2
  • 12
    • 77956149778 scopus 로고    scopus 로고
    • Continuous granulation with a twin-screw extruder: impact of material throughput
    • Djuric D., Kleinebudde P. Continuous granulation with a twin-screw extruder: impact of material throughput. Pharmaceutical Development and Technology 2010, 15(5):518-525.
    • (2010) Pharmaceutical Development and Technology , vol.15 , Issue.5 , pp. 518-525
    • Djuric, D.1    Kleinebudde, P.2
  • 14
    • 0001037629 scopus 로고
    • Fundamental and practical aspects of twin screw extrusion
    • Fichtali J., Van de Voort F.R. Fundamental and practical aspects of twin screw extrusion. Cereal Foods World 1989, 34(11):921-929.
    • (1989) Cereal Foods World , vol.34 , Issue.11 , pp. 921-929
    • Fichtali, J.1    Van de Voort, F.R.2
  • 16
    • 0029657217 scopus 로고    scopus 로고
    • Discrete particle simulation of bubble and slug formation in a two-dimensional gas-fluidised bed: a hard-sphere approach
    • Hoomans B.P.B., Kuipers J.A.M., et al. Discrete particle simulation of bubble and slug formation in a two-dimensional gas-fluidised bed: a hard-sphere approach. Chemical Engineering Science 1996, 51(1):99-118.
    • (1996) Chemical Engineering Science , vol.51 , Issue.1 , pp. 99-118
    • Hoomans, B.P.B.1    Kuipers, J.A.M.2
  • 17
    • 0030193548 scopus 로고    scopus 로고
    • Fundamental studies of granule consolidation part 1: effects of binder content and binder viscosity
    • Iveson S.M., Litster J.D., et al. Fundamental studies of granule consolidation part 1: effects of binder content and binder viscosity. Powder Technology 1996, 88(1):15-20.
    • (1996) Powder Technology , vol.88 , Issue.1 , pp. 15-20
    • Iveson, S.M.1    Litster, J.D.2
  • 18
    • 0037018970 scopus 로고    scopus 로고
    • Continuous twin screw extrusion for the wet granulation of lactose
    • Keleb E.I., Vermeire A., et al. Continuous twin screw extrusion for the wet granulation of lactose. International Journal of Pharmaceutics 2002, 239(1-2):69-80.
    • (2002) International Journal of Pharmaceutics , vol.239 , Issue.1-2 , pp. 69-80
    • Keleb, E.I.1    Vermeire, A.2
  • 19
    • 1542268927 scopus 로고    scopus 로고
    • Twin screw granulation as a simple and efficient tool for continuous wet granulation
    • Keleb E.I., Vermeire A., et al. Twin screw granulation as a simple and efficient tool for continuous wet granulation. International Journal of Pharmaceutics 2004, 273(1-2):183-194.
    • (2004) International Journal of Pharmaceutics , vol.273 , Issue.1-2 , pp. 183-194
    • Keleb, E.I.1    Vermeire, A.2
  • 20
    • 33947276312 scopus 로고    scopus 로고
    • Influence of the degree of polymerization on the behavior of cellulose during homogenization and extrusion/spheronization
    • (electronic resource)
    • Kleinebudde P., Jumaa M., et al. Influence of the degree of polymerization on the behavior of cellulose during homogenization and extrusion/spheronization. AAPS PharmSci 2000, 2(3). (electronic resource).
    • (2000) AAPS PharmSci , vol.2 , Issue.3
    • Kleinebudde, P.1    Jumaa, M.2
  • 21
    • 0027254549 scopus 로고
    • Experiments with an instrumented twin-screw extruder using a single-step granulation/extrusion process
    • Kleinebudde P., Lindner H. Experiments with an instrumented twin-screw extruder using a single-step granulation/extrusion process. International Journal of Pharmaceutics 1993, 94(1-3):49-58.
    • (1993) International Journal of Pharmaceutics , vol.94 , Issue.1-3 , pp. 49-58
    • Kleinebudde, P.1    Lindner, H.2
  • 22
    • 0032125567 scopus 로고    scopus 로고
    • An investigation into the kinetics of liquid distribution and growth in high shear mixer agglomeration
    • Knight P.C., Instone T., et al. An investigation into the kinetics of liquid distribution and growth in high shear mixer agglomeration. Powder Technology 1998, 97(3):246-257.
    • (1998) Powder Technology , vol.97 , Issue.3 , pp. 246-257
    • Knight, P.C.1    Instone, T.2
  • 24
    • 2342622738 scopus 로고    scopus 로고
    • Non-uniformity of binder distribution in high-shear granulation
    • Reynolds G.K., Biggs C.A., et al. Non-uniformity of binder distribution in high-shear granulation. Powder Technology 2004, 140(3):203-208.
    • (2004) Powder Technology , vol.140 , Issue.3 , pp. 203-208
    • Reynolds, G.K.1    Biggs, C.A.2
  • 25
    • 39049156707 scopus 로고    scopus 로고
    • Direct measurement of surface granular temperature in a high shear granulator
    • Reynolds G.K., Nilpawar A.M., et al. Direct measurement of surface granular temperature in a high shear granulator. Powder Technology 2008, 182(2):211-217.
    • (2008) Powder Technology , vol.182 , Issue.2 , pp. 211-217
    • Reynolds, G.K.1    Nilpawar, A.M.2
  • 26
    • 0034694397 scopus 로고    scopus 로고
    • Direct evidence of heterogeneity during high-shear granulation
    • Scott A.C., Hounslow M.J., et al. Direct evidence of heterogeneity during high-shear granulation. Powder Technology 2000, 113(1-2):205-213.
    • (2000) Powder Technology , vol.113 , Issue.1-2 , pp. 205-213
    • Scott, A.C.1    Hounslow, M.J.2
  • 27
    • 0027675958 scopus 로고
    • Discrete particle simulation of two-dimensional fluidized bed
    • Tsuji Y., Kawaguchi T., et al. Discrete particle simulation of two-dimensional fluidized bed. Powder Technology 1993, 77(1):79-87.
    • (1993) Powder Technology , vol.77 , Issue.1 , pp. 79-87
    • Tsuji, Y.1    Kawaguchi, T.2
  • 28
    • 42649100966 scopus 로고    scopus 로고
    • Validation of a continuous granulation process using a twin-screw extruder
    • Van Melkebeke B., Vervaet C., et al. Validation of a continuous granulation process using a twin-screw extruder. International Journal of Pharmaceutics 2008, 356(1-2):224-230.
    • (2008) International Journal of Pharmaceutics , vol.356 , Issue.1-2 , pp. 224-230
    • Van Melkebeke, B.1    Vervaet, C.2
  • 29
    • 0025267582 scopus 로고
    • Crosslinked starch as binding agent: I. Conventional wet granulation
    • Visavarungroj N., Herman J., et al. Crosslinked starch as binding agent: I. Conventional wet granulation. International Journal of Pharmaceutics 1990, 59(1):73-78.
    • (1990) International Journal of Pharmaceutics , vol.59 , Issue.1 , pp. 73-78
    • Visavarungroj, N.1    Herman, J.2
  • 30
    • 40749154785 scopus 로고    scopus 로고
    • Rheological properties and phase transition of starch under shear stress
    • Xue T., Yu L., et al. Rheological properties and phase transition of starch under shear stress. Food Hydrocolloids 2008, 22(6):973-978.
    • (2008) Food Hydrocolloids , vol.22 , Issue.6 , pp. 973-978
    • Xue, T.1    Yu, L.2
  • 31
    • 2542536210 scopus 로고    scopus 로고
    • Velocity distributions and mixing in the translational region of a kneading section in a co-rotating twin-screw extruder
    • Yerramilli L., Karwe M.V. Velocity distributions and mixing in the translational region of a kneading section in a co-rotating twin-screw extruder. Food and Bioproducts Processing 2004, 82(1):5-12.
    • (2004) Food and Bioproducts Processing , vol.82 , Issue.1 , pp. 5-12
    • Yerramilli, L.1    Karwe, M.V.2
  • 32
    • 0031260319 scopus 로고    scopus 로고
    • Theoretical modelling of torque requirements for single screw feeders
    • Yu Y., Arnold P.C. Theoretical modelling of torque requirements for single screw feeders. Powder Technology 1997, 93(2):151-162.
    • (1997) Powder Technology , vol.93 , Issue.2 , pp. 151-162
    • Yu, Y.1    Arnold, P.C.2


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.