Nanoarchitectured Co-Cr-Mo orthopedic implant alloys: Nitrogen-enhanced nanostructural evolution and its effect on phase stability

Acta Biomaterialia

Volumn 9, Issue 4, 2013, Pages 6259-6267

  Yamanaka, Kenta ^a,b   Mori, Manami ^c   Chiba, Akihiko ^b  

^a TOHOKU UNIVERSITY   (Japan)

^b TOHOKU UNIVERSITY   (Japan)

^c NISSAN ARC LTD   (Japan)

Author keywords

Biomedical Co Cr Mo alloys; Dislocations; Martensitic transformation; Nanoscale precipitation; Short range ordering

Indexed keywords

CHROMIUM ALLOYS; COBALT ALLOYS; DOPING (ADDITIVES); HIGH STRENGTH ALLOYS; MOLYBDENUM ALLOYS; NANOTECHNOLOGY; PHASE STABILITY; PRECIPITATES; PRECIPITATION (CHEMICAL); STACKING FAULTS; TERNARY ALLOYS;

BIOMEDICAL CO-CR-MO ALLOY; DISLOCATION; FACE-CENTRED CUBIC; IMPLANT ALLOYS; MATRIX; NANOSCALE PRECIPITATION; NANOSTRUCTURAL EVOLUTION; NITROGEN ADDITIONS; ORTHOPAEDIC IMPLANTS; SHORT RANGE ORDERING;

MARTENSITIC TRANSFORMATIONS;

ALLOY; CHROMIUM; COBALT; MOLYBDENUM; NANOMATERIAL; NITROGEN;

ARTICLE; CHEMICAL INTERACTION; CHEMICAL STRUCTURE; COMPRESSION; METAL IMPLANTATION; MOLECULAR STABILITY; ORTHOPEDIC IMPLANT; PRECIPITATION; PRIORITY JOURNAL;

EID: 84875372006     PISSN: 17427061     EISSN: 18787568     Source Type: Journal    
DOI: 10.1016/j.actbio.2012.12.013     Document Type: Article

References (55)

1. M. Niinomi Recent metallic materials for biomedical applications Metall Mater Trans A 33 2002 477 486
2. A. Buford, and T. Goswami Review of wear mechanisms in hip implants: I-General Mater Des 25 2004 385 393
3. A. Chiba, K. Kumagai, N. Nomura, and S. Miyakawa Pin-on-disk wear behavior in a like-on-like configuration in a biological environment of high carbon cast and low carbon forged Co-29Cr-6Mo alloys Acta Mater 55 2007 1309 1318
4. A.J. Saldivar-Garcia, and H.F. López Microstructural effects on the wear resistance of wrought and as-cast Co-Cr-Mo-C implant alloys J Biomed Mater Res 74A 2005 269 274
5. E. Battini, T. Eriksson, M. Boström, C. Leygraf, and J. Pan Influence of metal carbides on dissolution behavior of biomedical CoCrMo alloy: SEM, TEM and AFM studies Electrochim Acta 56 2011 9413 9419
6. Y. Liao, R. Pourzal, P. Stemmer, M.A. Wimmer, J.J. Jacobs, and A. Fischer New insights into hard phases of CoCrMo metal-on-metal hip replacements J Mech Behav Biomed 12 2012 39 49
7. H. Matsumoto, S. Kurosu, B.S. Lee, Y.P. Li, and A. Chiba Deformation mode in biomedical Co-27% Cr-5% Mo alloy consisting of a single hexagonal close-packed structure Scripta Mater 63 2010 1092 1095
8. K. Yamanaka, M. Mori, S. Kurosu, H. Matsumoto, and A. Chiba Ultrafine grain refinement of biomedical Co-29Cr-6Mo alloy during conventional hot-compression deformation Metall Mater Trans A 40A 2009 1980 1994
9. K. Yamanaka, M. Mori, and A. Chiba Origin of significant grain refinement of biomedical Co-29Cr-6Mo alloy without severe plastic deformation Metall Mater Trans A 43A 2012 4875 4887
10. K. Yamanaka, M. Mori, and A. Chiba Mechanical properties of as-forged Ni-free Co-29Cr-6Mo alloys with ultrafine-grained microstructure Mater Sci Eng A 528 2011 5961 5966
11. K. Yamanaka, M. Mori, and A. Chiba Enhanced mechanical properties of as-forged Co-Cr-Mo-N alloys with ultrafine-grained structures Metall Mater Trans A 43A 2012 5243 5257
12. M. Mori, K. Yamanaka, H. Matsumoto, and A. Chiba Evolution of cold-rolled microstructures of biomedical Co-Cr-Mo alloys with and without N doping Mater Sci Eng A 528 2010 614 621
13. M. Mori, K. Yamanaka, S. Sato, K. Wagatsuma, and A. Chiba Microstructures and mechanical properties of biomedical Co-Cr-Mo alloys processed by hot rolling Metall Mater Trans A 43A 2012 3108 3119
14. S.H. Lee, N. Nomura, and A. Chiba Significant improvement in mechanical properties of biomedical Co-Cr-Mo alloys with a combination of N addition and Cr enrichment Mater Trans 49 2008 260 264
15. J. Escobedo, J. Méndez, D. Cortés, J. Gómez, M. Méndez, and H. Mancha Effect of nitrogen on the microstructure and mechanical properties of a Co-Cr-Mo alloy Mater Des 17 1996 79 83
16. H.C. Hsu, and S.S. Lian Wear properties of Co-Cr-Mo-N plasma-melted surgical implant alloys J Mater Process Technol 138 2003 231 235
17. T. Kilner, A.J. Dempsey, R.M. Pilliar, and G.C. Weatherly The effects of nitrogen additions to a cobalt-chromium surgical implant alloy, Part 1: Processing and microstructure J Mater Sci 22 1987 565 574
18. A. Salinas-Rodriguez, and J.L. Rodriguez-Galicia Deformation behavior of low-carbon Co-Cr-Mo alloys for low-friction implant applications J Biomed Mater Res 31 1996 409 419
19. Mani A, Salinas-Rodriguez, López HF. Deformation induced FCC to HCP transformation in a Co-27Cr-5Mo-0.05C alloy. Mater Sci Eng A 2011;528:3037-3043.
20. S. Kurosu, H. Matsumoto, and A. Chiba Isothermal phase transformation in biomedical Co-29Cr-6Mo alloy without addition of carbon or nitrogen Metall Mater Trans A 41A 2010 2613 2625
21. A. Chiba, X.G. Li, and M.S. Kim High work-hardening rate and deformation twinning of Co-Ni-based superalloy at elevated temperatures Philos Mag A 79 1999 1533 1554
22. E. Denkhaus, and K. Salnikow Nickel essentiality, toxicity, and carcinogenicity Crit Rev Oncol Hematol 42 2002 35 56
23. A. Nagai, Y. Tsutsumi, Y. Suzuki, K. Katayama, T. Hanawa, and K. Yamashita Characterization of air-formed surface oxide film on a Co-Ni-Cr-Mo alloy (MP35N) and its change in Hanks' solution Appl Surf Sci 258 2012 5490 5498
24. R.V. Marrey, R. Burgermeister, R.B. Grishaber, and R.O. Ritchie Fatigue and life prediction for cobalt-chromium stents: a fracture mechanics analysis Biomaterials 27 2006 1988 2000
25. Y.P. Li, J.S. Yu, S. Kurosu, Y. Koizumi, H. Matsumoto, and A. Chiba Role of nitrogen addition in stabilizing the γ phase of Co-29Cr-6Mo alloy Mater Chem Phys 133 2012 29 32
26. V.G. Gavriljuk, V.N. Shivanyuk, and B.D. Shanina Change in the electron structure caused by C, N and H atoms in iron and its effect on their interaction with dislocations Acta Mater 53 2005 5017 5024
27. V.G. Gavriljuk, B.D. Shanina, and H. Berns On the correlation between electron structure and short range atomic order in iron-based alloys Acta Mater 48 2000 3879 3893
28. K. Oda, N. Kondo, and K. Shibata X-ray absorption fine structure analysis of interstitial (C, N)-substitutional (Cr) complexes in austenitic stainless steels ISIJ Int 30 1990 625 631
29. Nadutov VM, Bulavin LA, Garamus VM. Analysis of small-angle neutron scattering from Fe-18Cr-10Mn-16Ni-0.5N and Fe-21Cr-10Mn-17Ni-0.5C austenites. Mater Sci Eng A 1999;264:286-290.
30. M. Murayama, K. Hono, H. Hirukawa, T. Ohmura, and S. Matsuoka The combined effect of molybdenum and nitrogen on the fatigued microstructure of 316 type austenitic stainless steel Scripta Mater 41 1997 467 473
31. M. Ojima, Y. Adachi, Y. Tomota, K. Ikeda, T. Kamiyama, and Y. Katada Work hardening mechanism in high nitrogen austenitic steel studied by in situ neutron diffraction and in situ electron backscattering diffraction Mater Sci Eng A 527 2009 16 24
32. G. Saller, K. Spiradek-Hahn, C. Scheh, and H. Clemens Microstructural evolution of Cr-Mn-N austenitic steels during cold work hardening Mater Sci Eng A 427 2006 246 254
33. 2N formation in thermally aged 316LN austenitic stainless steels Metall Mater Trans A 27 1996 1175 1186
34. M.L.G. Byrnes, M. Grujicic, and W.S. Owen Nitrogen strengthening of a stable austenitic stainless steel Acta Metall 35 1987 1853 1862
35. J.H. Park, M. Kanda, N. Tsuchida, and Y. Tomota Effect of nitrogen addition on strain rate dependence of flow stress in austenitic stainless steels J Jpn Inst Metal 69 2005 867 873
36. A. Soussan, S. Degallaix, and T. Magnin Work-hardening behaviour of nitrogen-alloyed austenitic stainless steels Mater Sci Eng A 142 1991 169 176
37. Y. Tomota, J. Nakano, Y. Xia, and K. Inoue Unusual strainrate dependence of low temperature fracture behavior in high nitrogen bearing austenitic steels Acta Mater 46 1998 3099 3108
38. J. Talonen, and H. Hänninen Formation of shear bands and strain-induced martensite during plastic deformation of metastable austenitic stainless steels Acta Mater 55 2007 6108 6118
39. A. Sato, K. Soma, and T. Mori Hardening due to pre-existing ε-martensite in an Fe-30Mn-1Si alloy single crystal Acta Metall 30 1982 1901 1907
40. 2N precipitates in high-nitrogen austenitic stainless steel Acta Crystallogr A 61 2005 137 144
41. B. Fultz, and J. Howe Transmission electron microscopy and diffractometry of materials 3rd ed. 2009 Springer Berlin
42. S. Kurosu, H. Matsumoto, and A. Chiba Grain refinement of biomedical Co-27Cr-5Mo-0.16N alloy by reverse transformation Mater Lett 64 2010 49 52
43. Odahara T, Matsumoto H, Chiba A. Mechanical properties of biomedical Co-33Cr-5Mo-0.3N alloy at elevated temperatures. Mater Trans 2008;49:1963-1969.
44. G. Taylor Thermally-activated deformation of BCC metals and alloys Prog Mater Sci 36 1992 29 61
45. T.J. Rupert, J.C. Trenkle, and C.A. Schuh Enhanced solid solution effects on the strength of nanocrystalline alloys Acta Mater 59 2011 1619 1631
46. Suzuki T. In: Rosenfield AR, Hahn GT, Bement Jr AL, Jaffee RI, editors. Dislocation dynamics. New York: McGraw-Hill Book Company; 1968.
47. L. Lu, R. Schwaiger, Z.W. Shan, M. Dao, K. Lu, and S. Suresh Nano-sized twins induce high rate sensitivity of flow stress in pure copper Acta Mater 53 2005 2169 2179
48. H. Conrad Grain size dependence of the plastic deformation kinetics in Cu Mater Sci Eng A 341 2003 216 228
49. Q. Wei, S. Cheng, K.T. Ramesha, and E. Ma Effect of nanocrystalline and ultrafine grain sizes on the strain rate sensitivity and activation volume: fcc versus bcc metals Mater Sci Eng A 381 2004 71 79
50. F. Hamdi, and S. Asgari Influence of stacking fault energy and short-range ordering on dynamic recovery and work hardening behavior of copper alloys Scripta Mater 62 2010 693 696
51. K. Yamanaka, M. Mori, Y.P. Li, Y. Koizumi, and A. Chiba Dynamic strain aging in biomedical Co-Cr-Mo alloys with nitrogen addition Key Eng Mater 508 2012 141 145
52. K. Yamanaka, M. Mori, and A. Chiba Nitrogen-induced dynamic strain aging in a biomedical-grade Co-Cr-Mo alloy Mater Sci Eng A 552 2012 69 75
53. Olson GB, Cohen M. A general mechanism of martensitic nucleation: Part 1. General concepts and the FCC → HCP transformation. Metall Trans A 1976;7A:1897-1904.
54. Allain A, Chateau JP, Bouaziz O, Migot S, Guelton N. Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe-Mn-C alloys. Mater Sci Eng A 2004;387-389:158-162.
55. S. Kibey, J.B. Liu, M.J. Curtis, D.D. Johnson, and H. Sehitoglu Effect of nitrogen on generalized stacking fault energy and stacking fault widths in high nitrogen steels Acta Mater 54 2006 2991 3001