New insights into hard phases of CoCrMo metal-on-metal hip replacements

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 12, Issue , 2012, Pages 39-49

  Liao, Y ^a   Pourzal, R ^a,b   Stemmer, P ^a,b   Wimmer, M A ^c   Jacobs, J J ^a,c   Fischer, A ^b,c   Marks, L D ^a  

^a Northwestern University   (United States)

^b UNIVERSITY OF DUISBURG ESSEN   (Germany)

^c RUSH UNIVERSITY MEDICAL CENTER   (United States)

Author keywords

Carbide; CoCrMo alloy; Hard phases; Hip prosthesis; Metal on metal; Precession electron diffraction

Indexed keywords

CAST ALLOYS; CAST AND WROUGHT; CHEMICAL COMPOSITIONS; COCRMO ALLOY; COOLING RATES; EUTECTIC SOLIDIFICATION; FINE GRAINS; HARD PHASE; HARD PHASIS; HIP REPLACEMENTS; IN-VIVO; METAL-ON-METAL; MICRO-STRUCTURAL; NANO-INDENTATION MEASUREMENTS; NANO-STRUCTURED; NANOSIZED GRAINS; PROSTHETIC DEVICES; SINGLE PHASE; SLOW COOLING; SLUGGISH KINETICS; WROUGHT ALLOYS;

ALLOYS; CARBIDES; CHROMIUM; COOLING; ELECTRON DIFFRACTION; HIP PROSTHESES; MECHANICAL PROPERTIES; METALS; NANOINDENTATION; PRECIPITATION (CHEMICAL); PROSTHETICS; SOLIDIFICATION; TRANSMISSION ELECTRON MICROSCOPY;

MOLYBDENUM;

ALLOY; CHROMIUM; COBALT; MOLYBDENUM;

ARTICLE; ATOMIC FORCE MICROSCOPY; BIOMECHANICS; COOLING; DEVICES; ELECTRON DIFFRACTION; ENERGY DISPERSIVE X RAY SPECTROMETER; HARDNESS; HEATING; HIP PROSTHESIS; HUMAN; KINETICS; LOADING TEST; METAL IMPLANTATION; PHYSICAL PARAMETERS; PRIORITY JOURNAL; SCANNING ELECTRON MICROSCOPE; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION; X RAY SPECTROMETRY;

ALLOYS; ARTHROPLASTY, REPLACEMENT, HIP; BIOMECHANICS; ELECTRONS; EQUIPMENT DESIGN; HARDNESS; HUMANS; MATERIALS TESTING; MICROSCOPY; MICROSCOPY, ELECTRON, SCANNING; MICROSCOPY, ELECTRON, TRANSMISSION; PRESSURE; PROSTHESES AND IMPLANTS; PROSTHESIS DESIGN; TEMPERATURE; VITALLIUM;

EID: 84861695518     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2012.03.013     Document Type: Article

References (49)

1. Antony K.C. Wear-resistant cobalt-base alloys. J. Met. 1983, 35:52-60.
2. Asgar K., Peyton F.A. Effect of microstructure on physical properties of cobalt-base alloys. J. Dent. Res. 1961, 40:63-72.
3. Buscher R., Fischer A. The pathways of dynamic recrystallization in all-metal hip joints. Wear 2005, 259:887-897.
4. Catelas I., Bobyn J.D., Medley J.B., Krygier J.J., Zukor D.J., Huk O.L. Size, shape, and composition of wear particles from metal-metal hip simulator testing: effects of alloy and number of loading cycles. J. Biomed. Mater. Res. Part A 2003, 67A:312-327.
5. Caudillo M., Herrera-Trejo M., Castro M.R., Ramirez E., Gonzalez C.R., Juarez J.I. On carbide dissolution in an as-cast ASTM F-75 alloy. J. Biomed. Mater. Res. 2002, 59:378-385.
6. Chan F.W., Bobyn J.D., Medley J.B., Krygier J.J., Tanzer M. Wear and lubrication of metal-on-metal hip implants. Clin. Orthop. Relate. Res. 1999, 10-24.
7. Ciston J., Deng B., Marks L.D., Own C.S., Sinkler W. A quantitative analysis of the cone-angle dependence in precession electron diffraction. Ultramicroscopy 2008, 108:514-522.
8. Clemow A.J.T., Daniell B.L. Solution treatment behavior of Co-Cr-Mo alloy. J. Biomed. Mater. Res. 1979, 13:265-279.
9. Devine T.M., Wulff J. Cast vs. wrought cobalt-chromium surgical implant alloys. J. Biomed. Mater. Res. 1975, 9:151-167.
10. Devine T.M., Kummer F.J., Wulff J. Wrought cobalt-chromium surgical implant alloys. J. Mater. Sci. 1972, 7:126-128.
11. Dobbs H.S., Robertson J.L.M. Heat-treatment of cast Co-Cr-Mo for orthopedic implant use. J. Mater. Sci. 1983, 18:391-401.
12. Doorn P.F., Campbell P.A., Worrall J., Benya P.D., McKellop H.A., Amstutz H.C. Metal wear particle characterization from metal on metal total hip replacements: transmission electron microscopy study of periprosthetic tissues and isolated particles. J. Biomed. Mater. Res. 1998, 42:103-111.
13. Gemmi M., Klein H., Rageau A., Strobel P., Le Cras F. Structure solution of the new titanate Li4Ti8Ni3O21 using precession electron diffraction. Acta Crystallogr. Sect. B 2010, 66:60-68.
14. Gjonnes K. On the integration of electron diffraction intensities in the Vincent-Midgley precession technique. Ultramicroscopy 1997, 69:1-11.
15. Gjonnes J., Hansen V., Berg B.S., Runde P., Cheng Y.F., Gjonnes K., Dorset D.L., Gilmore C.J. Structure model for the phase AlmFe derived from three-dimensional electron diffraction intensity data collected by a precession technique. Comparison with convergent-beam diffraction. Acta Crystallogr. Sect. A 1998, 54:306-319.
16. Gjonnes K., Cheng Y.F., Berg B.S., Hansen V. Corrections for multiple scattering in integrated electron diffraction intensities. Application to determination of structure factors in the [001] projection of AlmFe. Acta Crystallogr. Sect. A 1998, 54:102-119.
17. Gjonnes J., Hansen V., Kverneland A. The precession technique in electron diffraction and its application to structure determination of nano-size precipitates in alloys. Microsc. Microanal. 2004, 10:16-20.
18. Gomez M., Mancha H., Salinas A., Rodriguez J.L., Escobedo J., Castro M., Mendez M. Relationship between microstructure and ductility of investment cast ASTM F-75 implant alloy. J. Biomed. Mater. Res. 1997, 34:157-163.
19. Hadermann J., Abakumov A.M., Tsirlin A.A., Filonenko V.P., Gonnissen J., Tan H.Y., Verbeeck J., Gemmi M., Antipov E.V., Rosner H. Direct space structure solution from precession electron diffraction data: resolving heavy and light scatterers in Pb13Mn9O25. Ultramicroscopy 2010, 110:881-890.
20. Hadermann J., Abakumov A.M., Turner S., Hafideddine Z., Khasanova N.R., Antipov E.V., Van Tendeloo G. Solving the structure of Li ion battery materials with precession electron diffraction: application to Li(2)CoPO(4)F. Chem. Mater. 2011, 23:3540-3545.
21. Hutchings I.M. Tribology: Friction and Wear of Engineering Materials 1992, Edward Arnold, London.
22. Jacobs J.J., Urban R.M., Hallab N.J., Skipor A.K., Fischer A., Wimmer M.A. Metal-on-metal bearing surfaces. J. Am. Acad. Orthop. Surg. 2009, 17:69-76.
23. Kilner T., Pilliar R.M., Weatherly G.C., Allibert C. Phase identification and incipient melting in a cast Co-Cr surgical implant alloy. J. Biomed. Mater. Res. 1982, 16:63-79.
24. Kuo K.H., Jia C.L. Crystallography of M23c6 and M6c precipitated in a low-alloy steel. Acta Metall. Mater. 1985, 33:991-996.
25. Kurtz S., Ong K., Lau E., Mowat F., Halpern M. Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030. J. Bone Joint Surg. Am. 2007, 89A:780-785.
26. Liao Y., Pourzal R., Wimmer M.A., Jacobs J.J., Fischer A., Marks L.D. Graphitic tribological layers in metal-on-metal hip replacements. Science 2011, 334:1687-1690.
27. Lopez H.F., Saldivar-Garcia A.J. Martensitic transformation in a cast Co-Cr-Mo-C alloy. Metall. Mater. Trans. A 2008, 39A:8-18.
28. Meshi L., Samuha S., Kapush D., Pavlyuchkov D., Grushko B. New complex intermetallic in the Al-Rh-Ru alloy system. J. Alloys Compd. 2011, 509:6551-6555.
29. Moeck P., Rouvimov S. Precession electron diffraction and its advantages for structural fingerprinting in the transmission electron microscope. Z. Krist. 2010, 225:110-124.
30. Montero-Ocampo C., Talavera M., Lopez H. Effect of alloy preheating on the mechanical properties of as-cast Co-Cr-Mo-C alloys. Metall. Mater. Trans. A 1999, 30:611-620.
31. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic-modulus using load and displacement sensing indentation experiments. J. Mater. Res. 1992, 7:1564-1583.
32. Own C.S., Marks L.D., Sinkler W. Electron precession: a guide for implementation. Rev. Sci. Instrum. 2005, 76.
33. Own C.S., Marks L.D., Sinkler W. Precession electron diffraction 1: multislice simulation. Acta Crystallogr. Sect. A 2006, 62:434-443.
34. Own C.S., Sinkler W., Marks L.D. Rapid structure determination of a metal oxide from pseudo-kinematical electron diffraction data. Ultramicroscopy 2006, 106:114-122.
35. Poggie, R.A., Afflitto, R.M., John, K.S., The wear performance of precision Co-Cr-Mo alloy metal-on-metal hip bearings, in: Proceedings of the Conference Transactions of the12th Annual International Symposium for Technology in Arthroplasty, Chicago, 1999, pp. XI:1-XI:2.
36. Pourzal R., Theissmann R., Williams S., Gleising B., Fisher J., Fischer A. Subsurface changes of a MoM hip implant below different contact zones. J. Mech. Behav. Biomed. 2009, 2:186-191.
37. Rauch E.F., Portillo J., Nicolopoulos S., Bultreys D., Rouvimov S., Moeck P. Automated nanocrystal orientation and phase mapping in the transmission electron microscope on the basis of precession electron diffraction. Z. Krist. 2010, 225:103-109.
38. Saldivar-Garcia A.J., Lopez H.F. Microstructural effects on the wear resistance of wrought and as-cast Co-Cr-Mo-C implant alloys. J. Biomed. Mater. Res. Part A 2005, 74A:269-274.
39. Schurmann U., Duppel V., Buller S., Bensch W., Kienle L. Precession electron diffraction-a versatile tool for the characterization of phase change materials. Cryst. Res. Technol. 2011, 46:561-568.
40. Senior B.A. A critical-review of precipitation behavior in 1cr-Mo-V rotor steels. Mater. Sci. Eng. A Struct. 1988, 103:263-271.
41. Sinkler W., Marks L.D. Characteristics of precession electron diffraction intensities from dynamical simulations. Z. Krist. 2010, 225:47-55.
42. Sinkler W., Own C.S., Ciston J., Marks L.D. Statistical treatment of precession electron diffraction data with principal components analysis. Microsc. Microanal. 2007, 13(Suppl. 2 Proceedings):954CD-955CD.
43. Streicher R.M., Schon R., Semlitsch M.F. Investigation of the tribological behavior of metal-on-metal combinations for artificial hip joints. Biomed. Tech. 1990, 35:107-111.
44. Taylor R.N.J., Waterhouse R.B. The metallography of a cobalt-based implant alloy after solution treatment and ageing. J. Mater. Sci. 1986, 21:1990-1996.
45. Vincent R., Midgley P.A. Double conical beam-rocking system for measurement of integrated electron-diffraction intensities. Ultramicroscopy 1994, 53:271-282.
46. Willert H.G., Semlitsch M. Reactions of articular capsule to wear products of artificial joint prostheses. J. Biomed. Mater. Res. 1977, 11:157-164.
47. Wimmer M.A., Loos J., Nassutt R., Heitkemper M., Fischer A. The acting wear mechanisms on metal-on-metal hip joint bearings: in vitro results. Wear 2001, 250:129-139.
48. Wimmer M.A., Sprecher C., Hauert R., Tager G., Fischer A. Tribochemical reaction on metal-on-metal hip joint bearings-a comparison between in-vitro and in-vivo results. Wear 2003, 255:1007-1014.
49. Zum Gahr K.H. Microstructure and Wear of Materials 1987, Elsevier Science Publishers, Amsterdam, The Netherlands.