Current frequency spectral subtraction and its contribution to induction machines' bearings condition monitoring

IEEE Transactions on Energy Conversion

Volumn 28, Issue 1, 2013, Pages 135-144

  Bouchikhi, El Houssin El ^a   Choqueuse, Vincent ^a   Benbouzid, Mohamed El Hachemi ^a  

^a UNIVERSITÉ DE BRETAGNE OCCIDENTALE   (France)

Author keywords

Bearing fault; fault detection; induction machines; signal processing; spectral subtraction

Indexed keywords

AIR-GAP ECCENTRICITY; BEARING FAULT; BROKEN ROTOR BAR; CURRENT FREQUENCY; ELECTRICAL MACHINE; ELECTROMAGNETIC CIRCUITS; INDUCTION MACHINES; MAINTENANCE SAVINGS; RESEARCH ACTIVITIES; SHORT TIME FOURIER TRANSFORMS; SPECTRAL SUBTRACTIONS; STATOR CURRENTS;

DISCRETE WAVELET TRANSFORMS; ELECTRIC MACHINERY; EQUIPMENT TESTING; FAULT DETECTION; INDUSTRIAL APPLICATIONS; SIGNAL PROCESSING; STATORS;

CONDITION MONITORING;

EID: 84873736589     PISSN: 08858969     EISSN: None     Source Type: Journal    
DOI: 10.1109/TEC.2012.2227746     Document Type: Article

References (36)

1. M. E. H. Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Ind. Electron., vol. 47, no. 5, pp. 984-993, Oct. 2000.
2. P. Zhang, Y. Du, T. Habetler, and B. Lu, "A survey of condition monitoring and protection methods for medium-voltage induction motors," IEEE Trans. Ind. Appl., vol. 47, no. 1, pp. 34-46, Jan./Feb. 2011.
3. A. H. Bonnett and C. Yung, "Increased efficiency versus increased reliability," IEEE Ind. Appl. Mag., vol. 14, no. 1, pp. 29-36, Jan./Feb. 2008. (Pubitemid 351314194)
4. S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors - A review," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 719-729, Dec. 2005. (Pubitemid 41830047)
5. M. E. H. Benbouzid andG.Kliman, "What stator current processing based technique to use for induction motor rotor faults diagnosis?," IEEE Trans. Energy Convers., vol. 18, no. 2, pp. 238-244, Jun. 2003.
6. A. Bellini, F. Filippetti, C. Tassoni, and G. A. Capolino, "Advances in diagnostic techniques for inductionmachines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4109-4126, Dec. 2008.
7. G. Didier, E. Ternisien, O. Caspary, and H. Razik, "Fault detection of broken rotor bars in induction motor using a global fault index," IEEE Trans. Ind. Appl., vol. 42, no. 1, pp. 79-88, Jan. 2006. (Pubitemid 43204770)
8. A. Yazidi, H. Henao, G. A. Capolino, M. Artioli, and F. Filippetti, "Improvement of frequency resolution for three-phase inductionmachine fault diagnosis," in Proc. 2005 IEEE Ind. Appl. Conf. IAS Annu. Meet., Oct. 2005, pp. 20-25. (Pubitemid 44042426)
9. A. Bellini, A. Yazidi, F. Filippetti, C. Rossi, and G. Capolino, "High frequency resolution techniques for rotor fault detection of induction machines," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4200-4209, Dec. 2008.
10. M. Benbouzid, H. Nejjari, R. Beguenane, and M. Vieira, "Induction motor asymmetrical faults detection using advanced signal processing techniques," IEEE Trans. Energy Convers., vol. 14, no. 2, pp. 147-152, Jun. 1999.
11. E. H. El Bouchikhi, V. Choqueuse, M. E. H. Benbouzid, J. Charpentier, and G. Barakat, "A comparative study of time-frequency representations for fault detection in wind turbine," in Proc. IEEE Ind. Electron. Soc., Melbourne, Australia, Nov. 2011, pp. 3584-3589.
12. M. Blodt, J. Regnier, and J. Faucher, "Distinguishing load torque oscillations and eccentricity faults in induction motors using stator current wigner distributions," IEEE Trans. Ind. Appl., vol. 45, no. 6, pp. 1991- 2000, Nov./Dec. 2009.
13. B. Yazici and G. Kliman, "An adaptive statistical time-frequency method for detection of broken bars and bearing faults in motors using stator current," IEEE Trans. Ind. Appl., vol. 35, no. 2, pp. 442-452, Mar./Apr. 1999.
14. J.Pons-Llinares, J.Antonino-Daviu, M. Riera-Guasp, M. Pineda-Sanchez, and V. Climente-Alarcon, "Induction motor diagnosis based on a transient current analytic wavelet transform via frequency b-splines," IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1530-1544, May 2011.
15. E. H. El Bouchikhi, V. Choqueuse, M. E. H. Benbouzid, and J. Charpentier, "Induction machine bearing failures detection using stator current frequency spectral subtraction," in Proc. IEEE Int. Symp. Ind. Electron., Hangzhou, China, May 2012, pp. 1228-1233.
16. G.Yu, S. Mallat and E. Bacry, "Audio denoising by time-frequency block thresholding," IEEE Trans. Signal Process., vol. 56, no. 5, pp. 1830-1839, May 2008.
17. Y. Ephraim and D. Malah, "Speech enhancement using a minimum mean square short-time spectral amplitude estimator," IEEE Trans. Acoust., Speech Signal Process., vol. ASSP-32, no. 6, pp. 1109-1121, Dec. 1984.
18. S. Boll, "Suppression of acoustic noise in speech using spectral subtraction," IEEE Trans. Acoust., Speech Signal Process., vol. ASSP-27, no. 2, pp. 113-120, Apr. 1979. (Pubitemid 9467471)
19. I. Bozchalooi and M. Liang, "A joint resonance frequency estimation and in-band noise reduction method for enhancing the detectability of bearing fault signals," Mech. Syst. Signal Process., vol. 22, no. 4, pp. 915-933, May 2008. (Pubitemid 351289018)
20. J. Dron, F. Boleas, and I. Rasolofondraibe, "Improvement of the sensitivity of the scalar indicators (vrest factor, kurtosis) using a denoising method by spectral subtraction: application to the detection of defects in ball bearings," J. Sound Vib., vol. 270, nos. 1-2, pp. 61-73, Feb. 2004.
21. S. Kay and S. Marple, "Spectrum analysis - Amodern perspective," Proc. IEEE, vol. 69, no. 11, pp. 1380-1419, Nov. 1981.
22. M. Narasimha, "Modified ovelap-add and overlap-save convolution algorithms for real signals," IEEE Signal Process. Lett., vol. 13, no. 11, pp. 669-671, Nov. 2006. (Pubitemid 44593659)
23. R. E. Crochiere, "A weighted overlap-add method of short-time fourier analysis/synthesis," IEEE Trans. Acoust. Speech, Signal Process., vol. ASSP-28, no. 1, pp. 99-102, Feb. 1980. (Pubitemid 10472691)
24. H. Toliyat and T. Lipo, "Transient analysis of cage induction machines under stator, rotor bar and end ring faults," IEEE Trans. Energy Convers., vol. 10, no. 2, pp. 241-247, Jun. 1995.
25. H. Toliyat, M. Arefeen, and A. Parlos, "A method for dynamic simulation of air-gap eccentricity in induction machines," IEEE Trans. Ind. Appl., vol. 32, no. 4, pp. 910-918, Jul./Aug. 1996. (Pubitemid 126773869)
26. D. Dupont and A. Gautriaud, "Failure modeling in wind and tidal turbine generators: Development of simulation tool," Univ. Brest, Tech. Rep., 46 p., Nov. 2011.
27. G. Joksimovic, M. Durovic, J. Penman, and N. Arthur, "Dynamic simulation of dynamic eccentricity in induction machines-winding function approach," IEEE Trans. Energy Convers., vol. 15, no. 2, pp. 143-148, Jun. 2000.
28. A. Knight and S. Bertani, "Mechanical fault detection in a medium-sized induction motor using stator current monitoring," IEEE Trans. Energy Convers., vol. 29, no. 4, pp. 753-760, Dec. 2005. (Pubitemid 41830051)
29. R. Schoen, T. Habetler, F. Kamran, and R. Bartheld, "Motor bearing damage detection using stator current monitoring," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1274-1279, Nov./Dec. 1995.
30. M. Blodt, P. Granjon, B. Raison, and G. Rostaing, "Models for bearing damage detection in induction motors using stator monitoring," IEEE Trans. Ind. Electron., vol. 55, no. 4, pp. 1813-1822, Apr. 2008. (Pubitemid 351585994)
31. J. Stack, T. G. Habetler, and R. G. Harley, "Bearing fault detection via autoregressive stator current modeling," IEEE Trans. Ind. Appl., vol. 40, no. 3, pp. 740-747, May/Jun. 2004.
32. A. Lebaroud and G. Clerc, "Classification of induction machine faults by optimal time-frequency representations," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4290-4298, Dec. 2010.
33. L. Eren, K. Teotrakool, and M. Devaney, "Bearing fault detection via wavelet packet decomposition with spectral post processing," in Proc. 2007 IEEE IMTC, Warsaw, Poland, May 2007, pp. 1-4.
34. Z. Obeid, S. Poignant, J. Regnier, and P. Maussion, "Stator current based indicators for bearing fault detection in synchronous machine by statistical frequency selection," in Proc. Annu. Conf. Ind. Electron. Soc.,Melbourne, Australia, Nov. 2011, pp. 2036-2041.
35. J. Stack, T. G. Habetler, and R. G. Harley, "Fault classification and fault signature production for rolling element bearings in electric machines," IEEE Trans. Ind. Appl., vol. 40, no. 3, pp. 735-739, May/Jun. 2004.
36. L. Cohen, Time-Frequency Analysis. Englewood Cliffs, NJ: Prentice- Hall, 1995.