Induction machine bearing failures detection using stator current frequency spectral subtraction

IEEE International Symposium on Industrial Electronics

Volumn , Issue , 2012, Pages 1228-1233

  El Bouchikhi, El Houssin ^a   Choqueuse, Vincent ^a   Benbouzid, Mohamed ^a   Charpentier, Jean Frédéric ^b  

^a UNIVERSITÉ DE BRETAGNE OCCIDENTALE   (France)

^b French Naval Academy   (France)

Author keywords

fault detection; Induction machine; signal processing; spectral subtraction

Indexed keywords

AIR-GAP ECCENTRICITY; BEARING FAILURES; BEARING FAULT; BROKEN ROTOR BAR; ELECTRICAL MACHINE; ELECTROMAGNETIC CIRCUITS; INDUCTION MACHINES; RESEARCH ACTIVITIES; SIMULATION DATA; SPECTRAL SUBTRACTIONS; STATOR CURRENTS;

ELECTRIC MACHINERY; FAULT DETECTION; INDUSTRIAL APPLICATIONS; SIGNAL PROCESSING; STATORS;

INDUSTRIAL ELECTRONICS;

EID: 84864858826     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ISIE.2012.6237265     Document Type: Conference Paper

References (24)

1. M. E. H. Benbouzid, "A review of induction motors signature analysis as a medium for faults detection," IEEE Trans. Industrial Electronics, vol. 47, no. 5, pp. 984-993, October 2000.
2. S. Nandi, H. A. Toliyat, and X. Li, "Condition monitoring and fault diagnosis of electrical motors - a review," IEEE Trans. Energy Conversion, vol. 20, no. 4, pp. 719-729, December 2005.
3. M. E. H. Benbouzid and G. Kliman, "What stator current processing based technique to use for induction motor rotor faults diagnosis?" IEEE Trans. Energy Conversion, vol. 18, no. 2, pp. 238-244, June 2003.
4. A. Lebaroud and G. Clerc, "Classification of induction machine faults by optimal time-frequency representations," IEEE Trans. Industrial Electronics, vol. 55, no. 12, pp. 4290-4298, December 2010.
5. A. Bellini, A. Yazidi, F. Filippetti, C. Rossi, and G. Capolino, "High frequency resolution techniques for rotor fault detection of induction machines," IEEE Transactions on Industrial Electronics, vol. 55, no. 12, pp. 4200-4209, December 2008.
6. E. H. El Bouchikhi, V. Choqueuse, M. E. H. Benbouzid, J. Charpentier, and G. Barakat, "A comparative study of time-frequency representations for fault detection in wind turbine," in Proceedings of the 2011 IEEE IECON, Melbourne (Australia), November 2011, pp. 3584-3589.
7. M. Blodt, J. Regnier, and J. Faucher, "Distinguishing load torque oscillations and eccentricity faults in induction motors using stator current wigner distributions," IEEE Trans. Industry Applications, vol. 45, no. 6, pp. 1991-2000, November/December 2009.
8. B. Yazici and G. Kliman, "An adaptive statistical time-frequency method for detection of broken bars and bearing faults in motors using stator current," IEEE Trans. Industry Applications, vol. 35, no. 2, pp. 442-452, March/April 1999.
9. J.Pons-Llinares, J. Antonino-Daviu, M. Riera-Guasp, M. Pineda- Sanchez, and V. Climente-Alarcon, "Induction motor diagnosis based on a transient current analytic wavelet transform via frequency b-splines," IEEE Trans. Industrial Electronics, vol. 58, no. 5, pp. 1530-1544, May 2011.
10. G.Yu, S. Mallat, and E. Bacry, "Audio denoising by time-frequency block thresholding," IEEE Trans. Signal Processing, vol. 56, no. 5, pp. 1830-1839, May 2008.
11. Y. Ephraim and D. Malah, "Speech enhancement using a minimum mean square short-time spectral amplitude estimator," IEEE Trans. Acoustics, Speech and Signal Processing, vol. ASSP-32, no. 6, pp. 1109-1121, December 1984.
12. S. Boll, "Suppression of acoustic noise in speech using spectral subtraction," IEEE Trans. Acoustics, Speech and Signal Processing, vol. ASSP-27, no. 2, pp. 113-120, April 1979.
13. I. Bozchalooi and M. Liang, "A joint resonance frequency estimation and in-band noise reduction method for enhancing the detectability of bearing fault signals," Mechanical Systems and signal Processing, vol. 22, no. 4, pp. 915-933, May 2008.
14. J. Dron, F. Boleas, and I. Rasolofondraibe, "Improvement of the sensitivity of the scalar indicators (vrest factor, kurtosis) using a denoising method by spectral subtraction: application to the detection of defects in ball bearings," Journal of Sound and Vibration, vol. 270, no. 1-2, pp. 61-73, February 2004.
15. M. Narasimha, "Modified ovelap-add and overlap-save convolution algorithms for real signals," IEEE Signal Processing Letters, vol. 13, no. 11, pp. 669-671, November 2006.
16. H. Toliyat and T. Lipo, "Transient analysis of cage induction machines under stator, rotor bar and end ring faults," IEEE Trans. Energy Conversion, vol. 10, no. 2, pp. 241-247, June 1995.
17. G. Houdouin, G. Barakat, B. Dakyo, E. Destobbeleer, and C. Nichita, "A coupled magnetic circuit based global method for the simulation of squirrel cage induction machines under rotor and stator faults," in Proceedings of ELECTRIMACS'02, Montreal (Canada), August 2002, pp. 18-21.
18. H. Toliyat, M. Arefeen, and A. Parlos, "A method for dynamic simulation of air-gap eccentricity in induction machines," IEEE Trans. Industry Applications, vol. 32, no. 4, pp. 910-918, July/August 1996.
19. G. Joksimovic, M. Durovic, J. Penman, and N. Arthur, "Dynamic simulation of dynamic eccentricity in induction machines-finding function approach," IEEE Trans. Energy Conversion, vol. 15, no. 2, pp. 143-148, June 2000.
20. R. Schoen, T. Habetler, F. Kamran, and R. Bartheld, "Motor bearing damage detection using stator current monitoring," IEEE Trans. Industry Applications, vol. 31, no. 6, pp. 1274-1279, November/December 1995.
21. J. Stack, T. G. Habetler, and R. G. Harley, "Bearing fault detection via autoregressive stator current modeling," IEEE Trans. Industry Applications, vol. 40, no. 3, pp. 740-747, May/June 2004.
22. L. Eren, K. Teotrakool, and M. Devaney, "Bearing fault detection via wavelet packet decomposition with spectral post processing," in Proceedings of the 2007 IEEE IMTC, Warsaw (Poland), May 2007, pp. 1-4.
23. Y. Amirat, V. Choqueuse, M. E. H. Benbouzid, and S. Turri, "Hilbert transform-based bearing failure detection in DFIG-based wind turbines," International Review of Electrical Engineering, vol. 6, no. 3, pp. 1249-1256, June 2011.
24. L. Cohen, Time-Frequency Analysis. Englewood Cliffs, NJ: Prentice- Hall, 1995.