Polyurethane foams based on modified tung oil and reinforced with rice husk ash I: Synthesis and physical chemical characterization

Polymer Testing

Volumn 32, Issue 2, 2013, Pages 438-445

  Ribeiro Da Silva, Virginia ^a,b   Mosiewicki, Mirna A ^c   Yoshida, Maria Irene ^a   Coelho Da Silva, Mercês ^d   Stefani, Pablo M ^c   Marcovich, Norma E ^c  

^a FEDERAL UNIVERSITY OF MINAS GERAIS   (Brazil)

^b MINISTRY OF EDUCATION OF BRAZIL   (Brazil)

^c UNIVERSIDAD NACIONAL DE MAR DEL PLATA   (Argentina)

^d FEDERAL UNIVERSITY OF ITAJUBÁ   (Brazil)

Author keywords

Filled polyurethane foams; Natural polyol; Rice husk ash; Tung oil

Indexed keywords

ASH CONTENTS; CHEMICAL CHARACTERIZATION; CHEMICALLY MODIFIED; FILLER CONTENTS; FOAM MORPHOLOGY; INORGANIC FILLERS; NATURAL POLYOL; PHYSICO-CHEMICALS; POLYOL COMPONENTS; POLYURETHANE FOAM; PROCESS INDUSTRIES; REINFORCED FOAMS; RESIDUAL CHAR; RICE HUSK ASH; RIGID FILLERS; SILICA CONTENT; STABILIZING EFFECTS; THEORETICAL CALCULATIONS; TUNG OIL;

BLOWING AGENTS; CHEMICAL ANALYSIS; DRYING OILS; FILLERS; RIGID FOAMED PLASTICS; SILICA; THERMAL CONDUCTIVITY;

IODINE;

EID: 84873319962     PISSN: 01429418     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymertesting.2013.01.002     Document Type: Article

References (55)

1. A. Mosiewicki, G.A. Dell'arciprete, M.I. Aranguren, and N.E. Marcovich Polyurethane foams obtained from castor oil-based polyol and filled with wood flour J. Comp. Mat. 43 25 2009 3057
2. M.A. García, A. Pinottia, M.N. Martino, and N.E. Zaritzky Characterization of composite hydrocolloid films Carbohydr. Polym. 56 2004 399
3. A.A. Abdel Hakima, M. Nassara, A. Emamb, and M. Sultana Preparation and characterization of rigid polyurethane foam prepared from sugar-cane bagasse polyol Mater. Chem. Phys. 129 2011 301
4. M.A. Mosiewicki, U. Casado, N.E. Marcovich, and M.I. Aranguren Moisture dependence of the properties of composites made from tung oil based polyurethane and wood flour J. Polym. Res. 19 2 2012 9776
5. M.A. Mosiewicki, U. Casado, N.E. Marcovich, and M.I. Aranguren Polyurethanes from tung oil: polymer characterization and composites Polym. Eng. Sci. 49 4 2009 685
6. S.N. Khot, J.J. Lascala, E. Can, S.S. Morye, G.I. Williams, G.R. Plamese, S.H. Kusefoglu, and R.P. Wool Development and application of triglyceride-based polymers and composites J. Appl. Polym. Sci. 82 3 2001 703
7. S. Bhuyan, S. Sundararajan, S. Andjelkovic, and R. Larock Effect of crosslinking on tribological behavior of tung oil-based polymer Tribol. Int. 43 2010 831
8. X. Kong, and S.S. Narine Industrial and consumer nonedible products from oils and fats Vegetable Oils in Production of Polymers and Plastics 2005 Wiley
9. D. Eaves Handbook of Polymer 2004 Rapra Technology Limited
10. H.S. Katz, and J.V. Milewski Hand Book of Fillers for Plastics 1987 Van Nostrand Reinhold
11. B. Czupryñski, J. Liszkowska, and J. Paciorek-Sadowska Modification of rigid polyurethane-polyisocyanurate foam with selected powder fillers Polimery 53 2 2008 133
12. M. Thirumal, D. Khastgir, N.K. Singha, B.S. Manjunath, and Y.P. Naik Mechanical, morphological and thermal properties of rigid polyurethane foam: effect of the fillers Cell. Polym. 26 2007 245
13. D. de Mello, S.H. Pezzin, and S.C. Amico The effect of post-consumer PET particles on the performance of flexible polyurethane foams Polym. Test. 28 2009 702
14. M.I. Yoshida, V.R. Silva, P.C.C. Pinto, S.S. Sant'anna, M.C. Silva, and C.F. Carvalho Physico-chemical characterization and thermal analysis data of alumina waste from Bayer process J. Therm. Anal. Calorim. 109 2012 1429
15. K. Ashida Polyurethane and Related Foams: Chemistry and Technology 2007 CRC Press, Taylor & Francis Group
16. C. Jiao, and X. Chen Influence of fumed silica on the flame-retardant properties of ethylene vinyl acetate/aluminum hydroxide composites J. Appl. Polym. Sci. 120 2011 1285
17. F. Yang, I. Bogdanova, and G.L. Nelson Impact of the chemical composition of nanofillers on the flammability of polymer nanocomposites Polym. Adv. Technol. 19 2008 602
18. M. Fu, and B. Qu Synergistic flame retardant mechanism of fumed silica in ethylene-vinyl acetate/magnesium hydroxide blends Polym. Degrad. Stab. 85 2004 633
19. T. Kashiwagi, J.R. Shields, R.H. Harris, and R.D. Davis Jr. Flame-retardant mechanism of silica: effects of resin molecular weight J. Appl. Polym. Sci. 87 2003 1541
20. I. Javni, W. Zhang, V. Karajkov, and Z.F. Petrovic Effect of nano- and micro-silica fillers on polyurethane foam properties J. Cell Plast. 38 2002 229
21. P.M. Stefani, V. Cyras, A.T. Barchi, and A. Vazquez mechanical properties and thermal stability of rice husk ash filled epoxy foams J. Appl. Polym. Sci. 99 2006 2957
22. V. Zanin Análise da margem de comercialização do arroz gaúcho no mercado de São Paulo no período pós Plano Real 2011 Dissertação USP Piracicaba
23. J. Urbanski, W. Czerwinski, K. Janicka, F. Majewska, and H. Zowall Handbook of Analysis of Synthetic Polymers and Plastics 1977 John Wiley & Sons
24. M.I. Aranguren, J. Borrajo, and R.J.J. Williams Study of the formation of shell sand parts used in the shell molding process Sampe J. 20 3 1984 18
25. A. Campanella, L.M. Bonnaillie, and R.P. Wool Polyurethane foams from soyoil-based polyols J. Appl. Polym. Sci. 112 2009 2567
26. M. Thirumal, D. Khastgir, N.K. Singa, B.S. Manjunath, and Y.P. Naik Effect of foam density on the properties of water blown rigid polyurethane foam J. Appl. Polym. Sci. 108 2008 1810
27. Y.C. Tu, P. Kiatsimkul, G. Suppes, and F.H. Hsieh Physical properties of water-blown rigid polyurethane foams from vegetable oil-based polyols J. Appl. Polym. Sci. 105 2 2007 453
28. Z.S. Petrovic', W. Zhang, A. Zlatanic, C.C. Lava, and M. Ilavsky Effect of OH/NCO molar ratio on properties of soy-based polyurethane networks J. Polym. Environ. 10 1-2 2002 5
29. J. John, M. Bhattacharya, and R.B. Turner Characterization of polyurethane foams from soybean oil J. Appl. Polym. Sci. 86 2002 3097
30. R. Gu, M.M. Sain, and S.K. Konar A feasibility study of polyurethane composite foam with added hardwood pulp Ind. Crop. Prod. 42 2013 273
31. J.F. Jin, Y.L. Chen, D.N. Wang, C.P. Hu, S. Zhu, L. Vanoverloop, and D. Randall Structures and physical properties of rigid polyurethane foam prepared with rosin-based polyol J. Appl. Polym. Sci. 84 2002 598
32. M.A. Corcuera, L. Rueda, B. Fernandez d'Arlas, A. Arbelaiz, C. Marieta, I. Mondragon, and A. Eceiza Microstructure and properties of polyurethanes derived from castor oil Polym. Degrad. Stab. 95 11 2010 2175
33. T.L. Yu, T.L. Lin, Y.M. Tsai, and W.J. Liu Morphology of polyurethanes with triol monomer crosslinked on hard segments J. Polym. Sci. B Polym. Phys. 37 1999 2673
34. M.M. Coleman, K.H. Lee, D.J. Skrovanek, and P.C. Painter Hydrogen bonding in polymers. 4. Infrared temperature studies of a simple polyurethane Macromolecules 19 8 1986 2149
35. J.L. Sormana, and J.C. Meredith High-throughput discovery of structure-mechanical property relationships for segmented poly(urethane-urea)s Macromolecules 37 2004 2186
36. J.L. Stanford, A.J. Ryan, and M.J. Elwell Processing of Polymers. Materials Science and Technology: A Comprehensive Treatment 1997 VCH Publishers
37. J.G. Dillon Infrared Spectroscopic Atlas of Polyurethanes 1989 Lancaster PA
38. L. Zhang, H.K. Jeon, J. Malsam, R. Herrington, and C.W. Macosko Substituting soybean oil-based polyol into polyurethane flexible foams Polymer 48 2007 6656
39. J.L. Rivera-Armenta, T.H. Heinze, and A.M. Mendoza-MartÃnez New polyurethane foams modified with cellulose derivatives Eur. Polym. J. 40 2004 2803
40. D.L. Pavia, G.M. Lampman, and G.S. Kriz Introduction to Spectroscopy: A Guide for Students of Organics Chemistry second ed. 1996 Sunders College Publishing New York
41. D.K. Chattopadhyay, and D.C. Webster Thermal stability and flame retardancy of polyurethanes Prog. Polym. Sci. 34 10 2009 1068
42. J. Lefebvre, B. Bastin, M. Le Bras, S. Duquesne, R. Paleja, and R. Delobel thermal stability and fire properties of conventional flexible polyurethane foam formulations Polym. Degrad. Stab. 88 2005 28
43. M. Berta, C. Lindsay, G. Pans, and G. Camino Effect of chemical structure on combustion and thermal behaviour of polyurethane elastomers layered silicate nanocomposites Polym. Degrad. Stab. 91 2006 1179
44. S. Duquesne, M. Le Bras, S. Bourbigot, R. Delobel, G. Camino, B. Eling, C. Lindsay, and T. Roels Thermal degradation of polyurethane and polyurethane/expandable graphite coatings Polym. Degrad. Stab. 74 2001 493
45. X. Kong, and S.S. Narine Physical properties of polyurethane plastic sheets produced from polyols from canola oil Biomacromolecules 8 2007 2203
46. S. Semenzato, A. Lorenzetti, M. Modesti, E. Ugel, D. Hrelja, S. Besco, R.A. Michelin, A. Sassi, G. Facchin, F. Zorzi, and R. Bertani A novel phosphorus polyurethane FOAM/montmorillonite nanocomposite: preparation, characterization and thermal behaviour Appl. Clay Sci. 44 2009 35
47. L. Madaleno, R. Pyrz, A. Crosky, L.R. Jensen, J.C.M. Rauhe, V. Dolomanova, A.M.M.V.B. Timmons, J.J.C. Pinto, and J. Norman Processing and characterization of polyurethane nanocomposite foam reinforced with montmorillonite-carbon nanotube hybrids Composites: Part A 44 2013 1
48. P.M. Stefani, L. Esposito, L.B. Manfredi, and A. Vazquez Clay filled rigid polyurethane foams G.E. Zaikov, A. Jiménez, Polymer and Biopolymer Analysis and Characterization 2007 Nova Science
49. M. Thirumal, N.K. Singha, D. Khastgir, B.S. Manjunath, and Y.P. Naik Halogen-free flame-retardant rigid polyurethane foams: effect of alumina trihydrate and triphenylphosphate on the properties of polyurethane foams J. Appl. Polym. Sci. 116 2010 2260
50. G. Oertel Polyurethane Handbook second ed. 1994 Hanse
51. S. Tan, T. Abraham, D. Ference, and C.W. Macosko Rigid polyurethane foams from a soybean oil-based polyol Polymer 52 13 2011 2840
52. D. Randall, and S. Lee The Polyurethanes Book 2002 John Wiley & Sons Ltd
53. H.J.M. Grünbauer, J. Bicerano, P. Clavel, R.D. Daussin, H.A. de Vos, M.J. Elwell, H. Kawabata, H. Kramer, D.D. Latham, C.A. Martin, S.E. Moore, B.C. Obi, V. Parenti, A.K. Schrock, and R. van den Bosch Rigid polyurethane foams Polymeric Foams: Mechanisms and Materials 2004 CRC Press LLC (Taylor & Francis)
54. M. Modesti, and A. Lorenzetti Halogen-free flame retardants for polymeric foams Polym. Degrad. Stab. 78 2002 167
55. K.H. Badri, Z. Othman, and S.H. Ahmad Rigid polyurethane foams from oil palm resources J. Mater. Sci. 39 2004 5541