Effect of crosslinking on tribological behavior of tung oil-based polymers

Tribology International

Volumn 43, Issue 4, 2010, Pages 831-837

  Bhuyan, S ^a   Sundararajan, S ^a   Andjelkovic, D ^b   Larock, R ^b  

^a Iowa State University   (United States)

^b IOWA STATE UNIVERSITY   (United States)

Author keywords

Abrasive wear; Crosslinking; Friction; Polymer

Indexed keywords

ABRASIVE WEAR; ABRASIVE WEARS; BALL ON FLATS; CATIONIC COPOLYMERIZATION; CONE ANGLE; CROSS LINKING AGENTS; CROSS-LINKING DENSITY; DEFORMATION MECHANISM; DRY SLIDING; FIXED NORMAL LOAD; FRICTION AND WEAR BEHAVIORS; FRICTION AND WEAR CHARACTERISTICS; FRICTION COEFFICIENTS; MICRO-SCALE FRICTION; MICROTRIBOMETER; NANOINDENTATION TESTS; NORMAL LOADS; SINGLE STROKE; TRIBOLOGICAL BEHAVIORS; TRIBOLOGICAL PROPERTIES; TUNG OIL; WEAR TRACKS;

ABRASION; ABRASIVES; DRYING OILS; FRICTION; HARDNESS; PROBES; SCANNING ELECTRON MICROSCOPY; SILICON NITRIDE; STYRENE;

TRIBOLOGY;

EID: 75249103416     PISSN: 0301679X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.triboint.2009.11.011     Document Type: Article

References (31)

1. Brown R.C. Biorenewable resources: engineering new products from agriculture. 1st ed (2003), Iowa State Press, Ames
2. Kim S., and Dale B.E. Global potential bioethanol production from wasted crops and crop residues. Biomass and Bioenergy 26 4 (2004) 361-375
3. Kim S., and Dale B. Allocation procedure in ethanol production system from corn grain: I system expansion. International Journal of Life Cycle Assessment 7 4 (2002) 237-243
4. Adhvaryu A., Erhan S.Z., and Perez J.M. Tribological studies of thermally and chemically modified vegetable oils for use as environmentally friendly lubricants. Wear 257 3-4 (2004) 359-367
5. Bhuyan S., Sundararajan S., Yao L., Hammond E.G., and Wang T. Boundary lubrication properties of lipid-based compounds evaluated using microtribological methods. Tribology Letters 22 2 (2006) 167-172
6. Biresaw G. Biobased dry-film metalworking lubricants. Journal of Synthetic Lubrication 21 1 (2004) 43-58
7. Li F., Hanson M.V., and Larock R.C. Soybean oil-divinylbenzene thermosetting polymers: synthesis, structure, properties and their relationships. Polymer 42 (2001) 1567-1579
8. Li F.K., Hasjim J., and Larock R.C. Synthesis, structure, and thermophysical and mechanical properties of new polymers prepared by the cationic copolymerization of corn oil, styrene, and divinylbenzene. Journal of Applied Polymer Science 90 7 (2003) 1830-1838
9. Li F., and Larock R.C. Thermosetting polymers from cationic copolymerization of tung oil: synthesis and characterization. Journal of Applied Polymer Science 78 5 (2000) 1044-1056
10. Li F., and Larock R. Synthesis, structure and properties of new tung oil-styrene-divinlybenzene copolymers prepared by thermal polymerization. Biomacromolecules 4 (2003) 1018-1025
11. Park S.-J., Jin F.-L., Lee J.-R., and Shin J.-S. Cationic polymerization and physicochemical properties of a biobased epoxy resin initiated by thermally latent catalysts. European Polymer Journal 41 2 (2005) 231-237
12. Bhuyan S., Sundararajan S., Holden L.S., Andjelkovic D., and Larock R. Effect of crosslinking on the friction and wear behavior of soy-bean oil-based polymeric materials. Wear 263 (2007) 965-973
13. Lu Y., and Larock R.C. Corn oil-based composites reinforced with continuous glass fibers: fabrication and properties. Journal of Applied Polymer Science 102 4 (2006) 3345-3353
14. Lu Y., and Larock R.C. Novel biobased nanocomposites from soybean oil and functionalized organoclay. Biomacromolecules 7 9 (2006) 2692-2700
15. Pfister D., Baker J.R., Henna P.H., Lu Y., and Larock R.C. Preparation and properties of tung oil-based composites using spent germ as a natural filler. Journal of Applied Polymer Science 108 (2008) 3618-3625
16. Andjelkovic DD, Li FK, Larock RC. Novel polymeric materials from soybean oils - synthesis, properties, and potential applications. In: Bozell JJ, Patel MK, editors. Feedstocks for the future: Renewables for the production of chemicals and materials, 2006.
17. Li F, Larock RC. Synthesis, properties, and potential applications of novel thermosetting biopolymers from soybean and other natural oils. Mohanty AK, Misra M, Druzal LT, editors. Natural fibers, biopolymers and biocomposites, 2005.
18. Lu J., and Wool R.P. Novel thermosetting resins for SMC applications from linseed oil: synthesis, characterization, and properties. Journal of Applied Polymer Science 99 5 (2006) 2481-2488
19. Wood EC. Tung oil: a new American Industry, 1949.
20. Kinabrew R.G. Tung oil in Mississippi, The competitive position of the industry (1952), University of Mississippi, MS
21. Matyjaszewski K. Carbocationic polymerizations: mechanisms, synthesis and applications (1996), Marcel Dekker, New York
22. Kennedy J.P., and Marechal E. Carbocationic polymerizations (1982), Wiley, New York
23. Li F., and Larock R. New soybean oil-styrene-divinylbenzene thermosetting copolymers III tensile stress-strain behavior. Journal of Polymer Science: Part B: Polymer Physics 39 (2001) 60-77
24. Oliver W.C., and Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Journal of Materials Research 7 6 (1992) 1564-1583
25. Check J., Karuppiah K.S.K., and Sundararajan S. Comparison of the effect of surface roughness on the micro/nanotribological behavior of ultra-high-molecularweight polyethylene (UHMWPE) in air and bovine serum solution. Journal of Biomedical Materials Research Part A 74A 4 (2005)
26. Briscoe B.J., Fiori L., and Pelillo E. Nano-indentation of polymeric surfaces. Journal of Physics D - Applied Physics 31 (1998) 2395-2405
27. Cheng Y., Cheng C., and Ni W. Methods of obtaining instantaneous modulus of viscoelastic solids using displacement-controlled instrumented indentation with axisymmetric indenters of arbitrary smooth profiles. Material Science and Engineering A - Structural Material Properties Microstructure and Processing 423 (2006) 2-7
28. Bhushan B. Principles and application of tribology (1999), John Wiley & Sons, Inc., New York
29. Friedrich K. Friction and wear of polymer composites. In: Pipes R.B. (Ed). Composite materials series vol. 1 (1986), Elsevier, Amsterdam
30. Hokkirigawa K., and Kato K. An experimental and theoretical investigation of ploughing, cutting and wedge formation during abrasive wear. Tribology International 21 1 (1988) 51-57
31. Archard J.F. Contact and rubbing of flat surfaces. Journal of Applied Physics 24 (1953) 981-988