-
1
-
-
0035924649
-
The effect of cutting fluids on the machining of hardened AISI 4340 steel
-
DOI 10.1016/S0924-0136(01)00891-3, PII S0924013601008913
-
Avila, R.F.; Abrao, A.M. (2001) The effect of cutting fluids on the machining of hardened AISI 4340 steel. Journal of Materials Processing Technology, 119: 21-26. (Pubitemid 34108870)
-
(2001)
Journal of Materials Processing Technology
, vol.119
, Issue.1-3
, pp. 21-26
-
-
Avila, R.F.1
Abrao, A.M.2
-
2
-
-
84873308876
-
-
ASME, Dimensioning and Tolerancing, ASME, New York
-
ASME (2009) ASME Y14.5-2009, Dimensioning and Tolerancing. ASME, New York.
-
(2009)
ASME Y14.5-2009
-
-
-
3
-
-
33746716213
-
Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B
-
DOI 10.1016/j.ijmachtools.2005.09.007, PII S0890695505002580
-
Bruni, C.; Forcellese, F.; Gabrielli, F.; Simoncini, M. (2006) Effect of the lubrication-cooling technique, insert technology and machine bed material on the workpart surface finish and tool wear in finish turning of AISI 420B. International Journal of Machine Tool Manufacture, 46: 1547-1554. (Pubitemid 44160581)
-
(2006)
International Journal of Machine Tools and Manufacture
, vol.46
, Issue.12-13
, pp. 1547-1554
-
-
Bruni, C.1
Forcellese, A.2
Gabrielli, F.3
Simoncini, M.4
-
4
-
-
0035944460
-
A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments
-
DOI 10.1016/S0924-0136(01)01063-9, PII S0924013601010639
-
Davim, J.P. (2001) A Note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments. Journal of Materials Processing Technology, 116: 305-308. (Pubitemid 32975595)
-
(2001)
Journal of Materials Processing Technology
, vol.116
, Issue.2-3
, pp. 305-308
-
-
Davim J.Paulo1
-
5
-
-
0017633271
-
Mechanics of metal cutting and cutting fluid action
-
De Chiffre, L. (1977) Mechanics of metal cutting and fluid action. International Journal of Machine Tool Design and Research, 17(4): 225-234. (Pubitemid 8607579)
-
(1977)
Int J Mach Tool Des Res
, vol.17
, Issue.4
, pp. 225-234
-
-
De Chiffre, L.1
-
6
-
-
33846532296
-
An experimental investigation on effect of minimum quantity lubrication in machining AISI 1040 steel
-
DOI 10.1016/j.ijmachtools.2006.09.017, PII S0890695506002288
-
Dhar, N.R.; Ahmed, M.T.; Islam, S. (2007) An experimental investigation on effect of minimum quality lubrication in machining AISI 1040 steel. International Journal of Machine Tool Manufacture, 47: 748-753. (Pubitemid 46162105)
-
(2007)
International Journal of Machine Tools and Manufacture
, vol.47
, Issue.5
, pp. 748-753
-
-
Dhar, N.R.1
Ahmed, M.T.2
Islam, S.3
-
7
-
-
29144506115
-
The influence of minimum quantity of lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel
-
DOI 10.1016/j.jmatprotec.2005.06.047, PII S0924013605006655
-
Dhar, N.R.; Islam, M.W.; Islam, S.; Mithu, M.A.H. (2006a) The influence of minimum quality lubrication (MQL) on cutting temperature, chip and dimensional accuracy in turning AISI-1040 steel. Journal of Materials Processing Technology, 171: 93-99. (Pubitemid 41815164)
-
(2006)
Journal of Materials Processing Technology
, vol.171
, Issue.1
, pp. 93-99
-
-
Dhar, N.R.1
Islam, M.W.2
Islam, S.3
Mithu, M.A.H.4
-
8
-
-
32444446105
-
Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel
-
DOI 10.1016/j.jmatprotec.2005.09.022, PII S0924013605008964
-
Dhar, N.R.; Kamruzzaman, M.; Ahmed, M. (2006b) Effect of minimum quantity lubrication (MQL) on tool wear and surface roughness in turning AISI-4340 steel. Journal of Materials Processing Technology, 172: 299-304. (Pubitemid 43227341)
-
(2006)
Journal of Materials Processing Technology
, vol.172
, Issue.2
, pp. 299-304
-
-
Dhar, N.R.1
Kamruzzaman, M.2
Ahmed, M.3
-
10
-
-
84873299800
-
-
US Patent 3,265,620
-
Heiman, D.K. (1966) Cutting fluid. US Patent 3,265,620: 1-6.
-
(1966)
Cutting fluid
, pp. 1-6
-
-
Heiman, D.K.1
-
11
-
-
68649102481
-
Effects of cutting fluid application on tool wear in machining: Interactions with tool-coatings and tool surface features
-
Jayal, A.D.; Balaji, A.K. (2009) Effects of cutting fluid application on tool wear in machining: interactions with tool-coatings and tool surface features. Wear, 269: 1723-1730.
-
(2009)
Wear
, vol.269
, pp. 1723-1730
-
-
Jayal, A.D.1
Balaji, A.K.2
-
12
-
-
34547553694
-
High speed MQL finish-turning of Inconel 718 with different coated tools
-
DOI 10.1016/j.jmatprotec.2007.04.052, PII S0924013607004165
-
Kamat, Y.; Obikawa, T. (2007) High speed MQL finish-turning of Inconel 718 with different coated tools. Journal of Materials Processing Technology, 192-193: 281-286. (Pubitemid 47187991)
-
(2007)
Journal of Materials Processing Technology
, vol.192-193
, pp. 281-286
-
-
Kamata, Y.1
Obikawa, T.2
-
14
-
-
44749089317
-
Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel
-
Lalwani, D.I.; Mehta, N.K.; Jain, P.K. (2008) Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel. Journal of Materials Processing Technology, 206: 167-179.
-
(2008)
Journal of Materials Processing Technology
, vol.206
, pp. 167-179
-
-
Lalwani, D.I.1
Mehta, N.K.2
Jain, P.K.3
-
16
-
-
17844410364
-
Study of roundness on cylindrical bars turned of aluminium-copper alloys UNS A92024
-
DOI 10.1016/j.jmatprotec.2005.02.061, PII S0924013605001317
-
Marcos-Bárcena, M.; Sebastián-Pérez, M.A.; Contreras-Samper, J.P.; Sánchez-Carrilero, M.; Sánchez- López, M.; Sánchez-Sola, J.M. (2005) Study of roundness on cylindrical bars turned of aluminiumcopper alloys UNS A92024. Journal of Materials Processing Technology, 162-163: 644-648. (Pubitemid 40584449)
-
(2005)
Journal of Materials Processing Technology
, vol.162-163
, Issue.SPEC. ISS.
, pp. 644-648
-
-
Marcos-Barcena, M.1
Sebastian-Perez, M.A.2
Contreras-Samper, J.P.3
Sanchez-Carrilero, M.4
Sanchez-Lopez, M.5
Sanchez-Sola, J.M.6
-
17
-
-
40849094260
-
A comprehensive tool-wear=tool-life model in the evaluation of NDM (Near Dry Machining) for Sustainable Manufacturing
-
Marksberry, P.W.; Jawahir, I.S. (2008) A comprehensive tool-wear=tool-life model in the evaluation of NDM (Near Dry Machining) for Sustainable Manufacturing. International Journal of Machine Tool Manufacture, 48: 878-886.
-
(2008)
International Journal of Machine Tool Manufacture
, vol.48
, pp. 878-886
-
-
Marksberry, P.W.1
Jawahir, I.S.2
-
18
-
-
84870495211
-
-
Matweb, Accessed through Internet (25=4=2011)
-
Matweb (2011) Material Property Data, Accessed through Internet (25=4=2011), http://www.matweb.com/
-
(2011)
Material Property Data
-
-
-
19
-
-
33751416859
-
Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning
-
DOI 10.1016/j.matdes.2006.01.008, PII S0261306906000173
-
Nalbant, M.; Gokkaya, H.; Sur, G. (2007) Application of Taguchi method in the optmization of cutting parameters for surface roughness in turning. Materials and Design, 28: 1379-1385. (Pubitemid 44817462)
-
(2007)
Materials and Design
, vol.28
, Issue.4
, pp. 1379-1385
-
-
Nalbant, M.1
Gokkaya, H.2
Sur, G.3
-
21
-
-
79251627174
-
Surface integrity in cryogenic machining of nickel based alloy - Inconel 718
-
Pusavec, F.; Hamdi, H.; Kopac, J.; Jawahir, I.S. (2011) Surface integrity in cryogenic machining of nickel based alloy - Inconel 718. Journal of Materials Processing Technology, 211: 773-783.
-
(2011)
Journal of Materials Processing Technology
, vol.211
, pp. 773-783
-
-
Pusavec, F.1
Hamdi, H.2
Kopac, J.3
Jawahir, I.S.4
-
22
-
-
73349127185
-
An investigation into dimensional accuracy and surface finish achievable in dry turning
-
Rafai, N.H.; Islam, M.N. (2009) An investigation into dimensional accuracy and surface finish achievable in dry turning. Machining Science and Technology, 13: 571-589.
-
(2009)
Machining Science and Technology
, vol.13
, pp. 571-589
-
-
Rafai, N.H.1
Islam, M.N.2
-
23
-
-
79959815600
-
Comparison of dry and flood turning in terms of quality of turned parts
-
June 30th -July 2nd 2010 London
-
Rafai, N.H.; Islam, M.N. (2010) Comparison of Dry and Flood Turning in Terms of Quality of Turned Parts, Proceedings of World Congress on Engineering 2010, June 30th -July 2nd, 2010, London; 2044-2049.
-
(2010)
Proceedings of World Congress on Engineering 2010
, pp. 2044-2049
-
-
Rafai, N.H.1
Islam, M.N.2
-
25
-
-
61449138608
-
Cooling techniques for improved productivity in turning
-
Sharma, V.S.; Dogra, M.; Suri, N.M. (2009) Cooling techniques for improved productivity in turning, International Journal of Machine Tool and Manufacture, 49: 435-453.
-
(2009)
International Journal of Machine Tool and Manufacture
, vol.49
, pp. 435-453
-
-
Sharma, V.S.1
Dogra, M.2
Suri, N.M.3
-
26
-
-
0042115756
-
On the action of metal cutting fluids at low speeds
-
Shaw, M.C. (1959) On the action of metal cutting fluids at low speeds. Wear, 2(3): 217-227.
-
(1959)
Wear
, vol.2
, Issue.3
, pp. 217-227
-
-
Shaw, M.C.1
-
27
-
-
36248997036
-
Machining of 6061 aluminum alloy with MQL, dry and flooded lubricant conditions
-
Sreejith, P.S. (2008) Machining of 6061 aluminum alloy with MQL, dry and flooded lubricant conditions. Materials Letters, 62: 276-276.
-
(2008)
Materials Letters
, vol.62
, pp. 276-276
-
-
Sreejith, P.S.1
-
30
-
-
61349097218
-
Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis
-
Tzeng, C.-J.; Lin, Y.-H.; Yang, Y.-R.; Jeng, M.-C. (2009) Optimization of turning operations with multiple performance characteristics using the Taguchi method and Grey relational analysis. Journal of Materials Processing Technology, 209: 2753-2759.
-
(2009)
Journal of Materials Processing Technology
, vol.209
, pp. 2753-2759
-
-
Tzeng, C.-J.1
Lin, Y.-H.2
Yang, Y.-R.3
Jeng, M.-C.4
-
31
-
-
0030146016
-
An assessment of cutting fluid performance and improvements in surface finish
-
Upton, D.P. (1996) An assessment of cutting fluid performance and improvements in surface finish. Transactions of the Institute of Metal Finishing, 74(3): 103-105. (Pubitemid 126759077)
-
(1996)
Transactions of the Institute of Metal Finishing
, vol.74
, Issue.3
, pp. 103-105
-
-
Upton, D.P.1
-
32
-
-
0036027387
-
Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning
-
DOI 10.1016/S0890-6955(01)00119-5, PII S0890695501001195
-
Varadaarajan, A.S.; Philip, P.K.; Ramamoorthy, B. (2002) Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning. International Journal of Machine Tool and Manufacture, 42: 193-200. (Pubitemid 33018901)
-
(2002)
International Journal of Machine Tools and Manufacture
, vol.42
, Issue.2
, pp. 193-200
-
-
Varadarajan, A.S.1
Philip, P.K.2
Ramamoorthy, B.3
-
33
-
-
0032028535
-
Turning using extremely small amount of cutting fluid
-
Wakabayashi, T.; Sato, H.; Insaki, I. (1997) Turning using extremely small amount of cutting fluid. JSME International Journal, 41(1): 488-493.
-
(1997)
JSME International Journal
, vol.41
, Issue.1
, pp. 488-493
-
-
Wakabayashi, T.1
Sato, H.2
Insaki, I.3
-
34
-
-
4644310255
-
Near-dry machining for environmentally benign manufacturing- A comparison of machining Performance with flood cooling and dry machining
-
Hon, B. (Ed.), Professional Engineering Publications, Cambridge, UK
-
Wanigarathne, P.C.; Ee, K.C.; Jawahir, I.S. (2003) Near-dry machining for environmentally benign manufacturing - A comparison of machining Performance with flood cooling and dry machining, in Hon, B. (Ed.), Design and Manufacture for Sustainable Development, Professional Engineering Publications, Cambridge, UK; 39-48.
-
(2003)
Design and Manufacture for Sustainable Development
, pp. 39-48
-
-
Wanigarathne, P.C.1
Ee, K.C.2
Jawahir, I.S.3
|