Study on hot deformation behavior and microstructure evolution of cast-extruded AZ31B magnesium alloy and nanocomposite using processing map

Materials and Design

Volumn 47, Issue , 2013, Pages 449-455

  Srinivasan, M ^a   Loganathan, C ^b   Narayanasamy, R ^c   Senthilkumar, V ^c   Nguyen, Q B ^d   Gupta, M ^d  

^a SARANATHAN COLLEGE OF ENGINEERING   (India)

^b A V C COLLEGE OF ENGINEERING   (India)

^c NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^d NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

Author keywords

A. Nano material; C. Forming; F. Microstructure

Indexed keywords

COMPRESSION TESTING; DEFORMATION; DYNAMIC RECRYSTALLIZATION; MAGNESIUM ALLOYS; MICROSTRUCTURE; NANOCOMPOSITES; OPTICAL MICROSCOPY; STABILITY; STRAIN RATE; TRANSMISSION ELECTRON MICROSCOPY;

AZ31B MAGNESIUM ALLOYS; COMPRESSION TESTS; DEFORMATION MECHANISM; DYNAMIC RECOVERY; F. MICROSTRUCTURE; FLOW INSTABILITIES; HOT DEFORMATION BEHAVIORS; MICROSTRUCTURE EVOLUTIONS; NANOMATERIAL; OPTIMAL REGIONS; PROCESSING MAPS; STABILITY DOMAINS; TEMPERATURE RANGE; THREE-DIMENSIONAL (3D) PROCESSING; TRANSMISSION ELECTRON MICROSCOPY TEM;

HOT WORKING;

EID: 84872522740     PISSN: 02641275     EISSN: 18734197     Source Type: Journal    
DOI: 10.1016/j.matdes.2012.11.028     Document Type: Article

References (30)

1. Avedesian M., Baker H. Magnesium and magnesium alloys 1999, ASM International, Materials Park (OH).
2. 3 composite. Compos Sci Technol 2009, 69:1070-1076.
3. Prasad Y.V.R.K., Sasidhara S. Hot working guide: a compendium of processing maps 1997, ASM Intl, Materials Park (OH).
4. Prasad Y.V.R.K., Seshacharyulu T. Modelling of dynamic material behavior in hot deformation: forging of Ti-6242. Int Mat Rev 1998, 43:243-258.
5. Poletti C., Diering H., Warchmicka F. Local deformation and processing maps of as-cast AZ31 alloy. Mat Sci Eng A 2009, 516:138-147.
6. Spigarelli S., El Mehtedi M., Cabibbo M., Evangalista E., Kaneko J., Jager A., et al. Analysis of higher temperature deformation and microstructure of an AZ31 magnesium alloy. Mat Sci Eng A 2007, 462:197-201.
7. p through neural networks. J Mater Process Technol 2005, 166:423-429.
8. Senthilkumar V., Balaji A., Narayanasamy R. Analysis of hot deformation behavior of Al 5083-TiC nanocomposite using constitutive and dynamic material models. Mater Des 2012, 37:102-110.
9. Sivakesavam O., Prasad Y.V.R.K. Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy. Mater Sci Eng A 2002, 323:270-277.
10. Slooff F.A., Dzwonczyk J.S., Zhou J., Duszczyk J., Katgerman L. Hot workability analysis of extruded AZ magnesium alloys with processing maps. Mater Sci Eng A 2010, 527:735-744.
11. Liu Juan., Cui Zhenshan., Li Congxin. Analysis of metal workability by integration of FEM and 3-D processing maps. J Mater Process Technol 2008, 205:497-505.
12. Indrani Sen, Ravi Sankar Kottada, Ramamurty U. High temperature deformation processing maps for boron modified Ti-6Al-4V alloys. Mater Sci Eng A 2010, 527:6157-6165.
13. Ziegler H. Some extremum principles in irreversible thermodynamics with application to continuum mechanics. Progress in solid mechanics 1963, Vol. 4:93-192. Wiley, New York.
14. 3 nanocomposite with Addition of Ca. J Compos Mater 2009, 43:5-17.
15. Barnett M.R. Influence of deformation conditions and texture on the high temperature flow stress of magnesium AZ31. J Light Met 2001, 1:167-177.
16. Sivapragash M., Lakshminarayanan P.R., Karthikeyan R., Hanumantha M., Bhatt R.R. Hot deformation behavior of ZE41A magnesium alloy. Mater Des 2008, 29:860-866.
17. Beer A.G., Barnett M.R. Influence of initial microstructure on the hot working flow stress of Mg-3Al-1Zn. Mater Sci Eng A 2006, 2006(423):292-299.
18. Prasad Y.V.R.K., Gegel H.L., Doraivelu S.M., Malas J.C., Morgan J.T., Lark K.A., et al. Modeling of dynamic material behavior in hot deformation: forging of Ti-6242. Met Mater Tran A 1984, 15:1883-1892.
19. Srinivasan N., Prasad Y.V.R.K., Rama Rao P. Hot deformation behaviour of Mg-3Al alloy - a study using processing map. Mater Sci Eng A 2008, 476:146-156.
20. Jagan Reddy G., Srinivasan N., Gokhale Amol A., Kashyap B.P. Processing map for hot working of spray formed and isostatically pressed Al-Li alloy (UL40). J Mater Process Technol 2009, 209:5964-5972.
21. Raghunath B.K., Karthikeyan R., Ganesan G., Gupta M. An investigation of hot deformation response of particulate - reinforced magnesium +45% titanium composite. Mater Des 2006, 9:217-222.
22. 33w/ZK60 composite. Mater Sci Eng A 2008, 477:179-184.
23. Momeni A., Dehghani K. Hot working behavior of 2205 austenite-ferrite duplex stainless steel characterized by constitutive equations and processing maps. Mater Sci Eng A 2011, 528:1448-1454.
24. Wang C.Y., Wang X.Y., Chang H., Wu K., Zheng M.Y. Processing maps for hot working of ZK60 magnesium alloy. Mater Sci Eng A 2007, 464:52-58.
25. Dieter E. Mechanical metallurgy 1988, McGraw Hill Press, London, p. 133.
26. Sivakesavam O., Prasad Y.V.R.K. Characteristics of superplasticity domain in the process map of hot working of as-cast Mg-2Zn-1Mn alloy. Mater Sci Eng A 2003, 2003(362):104-110.
27. Li A.B., Huang L.J., Meng Q.Y., Geng L., Cui X.P. Hot working of Ti-6Al-3Mo-2Zr-03Si alloy with lamellar (α+β) starting structure using processing map. Mater Des 2009, 30:1625-1631.
28. Anbuselvan S., Ramanathan S. Hot deformation and processing maps of extruded ZE41A magnesium alloy. Mater Des 2010, 31:2319-2323.
29. p composite using fuzzy logic. J Mater Process Technol 2007, 183:104-110.
30. Shengli Guo, Defu Li, Xiaoping Wu, Xiaoqing Xu, Peng Du, Jie Hu Characterization of hot deformation behavior of a Zn-102Al-2.1Cu alloy using processing maps. Mater Des 2012, 41:158-166.