Hot deformation and processing maps of extruded ZE41A magnesium alloy

Materials and Design

Volumn 31, Issue 5, 2010, Pages 2319-2323

  Anbuselvan, S ^a   Ramanathan, S ^a  

^a ANNAMALAI UNIVERSITY   (India)

Author keywords

Dynamic recrystallization; Flow instability; Hot deformation; Magnesium alloy; Processing map

Indexed keywords

COMPRESSION TESTS; FLOW INSTABILITIES; HOT DEFORMATION; HOT DEFORMATION BEHAVIORS; HOT FORMING; MATERIAL DAMAGES; MICRO-STRUCTURAL; MICROSTRUCTURE EVOLUTIONS; PROCESSING MAP; PROCESSING MAPS; TEMPERATURE RANGE;

ALLOYS; COMPRESSION TESTING; DEFORMATION; HOT WORKING; MAGNESIUM; MAGNESIUM ALLOYS; STRAIN RATE;

DYNAMIC RECRYSTALLIZATION;

EID: 76549112993     PISSN: 02641275     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.matdes.2009.12.008     Document Type: Article

References (31)

1. 3 composite. Compos Sci Technol 69 (2009) 1070-1076
2. Srinivasan N., Prasad Y.V.R.K., and Rama Rao P. Hot deformation behavior of Mg-3Al alloy - a study using processing map. Mater Sci Eng A 476 (2008) 146-156
3. Yang Z., Guo Y.C., Li J.P., He F., Xia F., and Liang M.X. Plastic deformation and dynamic recrystallization behaviors of Mg-5Gd-4Y-0.5Zn-0.5Zr alloy. Mater Sci Eng A 485 (2008) 487-491
4. Zheng M.Y., Xu S.W., Qiao X.G., Wu K., Kamado S., and Kojima Y. Compressive deformation of Mg-Zn-Y-Zr alloy processed by equal channel angular pressing. Mater Sci Eng A 483 (2008) 564-567
5. Spigarelli S., El Mehtedi M., Cabibbo M., Evangalista E., Kaneko J., Jager A., et al. Analysis of high temperature deformation and microstructure of an AZ31 magnesium alloy. Mater Sci Eng A 462 (2007) 197-201
6. Raghunath B.K., Karthikeyan R., Ganesan G., and Gupta M. An investigation of hot deformation response of particulate-reinforced magnesium +9% titanium composite. Mater Design 29 (2008) 622-627
7. Kutumba Rao V.V., and Rajagopalachary T. Recent developments in modeling of hot working behavior of metallic materials. Bull J Mater Sci 19 (1996) 677-698
8. Frost H.J., and Ashby M.F. Deformation mechanism maps (1982), Pergamon Press, New York and Oxford p. 120-3
9. Raj R. Development of a processing map for use in warm-forming and hot-forming process. J Metall Mater Transact A 12A (1981) 1089-1097
10. Prasad Y.V.R.K., Gegel H.L., Morgan J.T., Malas J.C., Doraivelu S.M., and Barker D.R. A new systems approach to dynamic modeling of material behavior in metal working process. In: Froes F.H., and Eylon D. (Eds). Titanium net shape technologies (1984), The Metal Society of AIME, Warrendale (PN) 279-295
11. Gegel HL, Malas JC, Doraivelu SM. In: Forming and forging. Metals handbook, vol. 14. Metal Park (OH): ASM; 1988. p. 417-32.
12. Well stead P.E. Introduction to physical system modeling (1978), Academic Press, London
13. Prasad Y.V.R.K., Gegel H., Doraivelu S.M., Malas J.C., Morgan J.T., Lark K.A., et al. Modeling of dynamic material behavior in hot deformation: forging of Ti-6242. Metall Trans A 15A (1984) 1883-1892
14. Prasad Y.V.R.K., and Sheshacharulu T. Modeling of hot deformation for microstructural control. Int Mater Rev 44 (1998) 243-258
15. Prasad Y.V.R.K., and Sheshacharulu T. Resent advances in the science of mechanical processing. Indian J Technol 28 (1990) 435-451
16. Prasad Y.V.R.K., and Sasidara S. Hot working guide for a compendium of processing maps (1997), ASM International, Materials Park, (OH)
17. Niu J.G., Zhang X., Zhang Z.M., and Li B.C. Influence on the microstructure and properties of AZ61 magnesium alloy at warm deformation. J Mater Process Technol 187 (2007) 780-782
18. Jagan Reddy G, Srinivasan N, Gokhale Amol A, Kashyap BP. Processing map for hot working of spray formed and hot isostatically pressed Al-Li alloy (UL40). J Mater Process Technol; in press, doi:10.1016/j.jmatprotec.2009.07.016.
19. Raghunath B.K., Karthikeyan R., and Gupta M. An investigation of hot deformation response of particle-reinforced magnesium +4.5% titanium composite. Mater Res 9 (2006) 217-222
20. p composite material. Mater Sci Eng A 369 (2004) 230-235
21. Bhatt B.V.R., Mahajan Y.R., and Prasad Y.V.R.K. Effect of volume fraction of SiCp reinforcement on the processing maps for 2124 Al matrix composites. Metall Mater Trans A 31 (2000) 629-639
22. v equiaxed (α + β). Mater Sci Technol 16 (2000) 511-516
23. p composites. Mater Sci Eng A 441 (2006) 321-325
24. Sivakesavam O., and Prasad Y.V.R.K. Characteristics of superplasticity domain in the processing map for hot working of as-cast Mg-11.5Li-1.5Al alloy. Mater Sci Eng A 323 (2002) 270-277
25. Li A.B., Huang L.J., Meng Q.Y., Geng L., and Cui X.P. Hot working of Ti-6Al-3Mo-2Zr-0.3Si alloy with lamellar (α + β) starting structure using processing map. Mater Design 30 (2009) 1625-1631
26. Venugopal S., Venugopal P., and Mannan S.L. Optimization of cold and warm workability of commercially pure titanium using dynamic materials model (DMM) instability maps. J Mater Process Technol 202 (2008) 201-215
27. p composite using fuzzy logic. J Mater Process Technol 183 (2007) 104-110
28. Sivakasavam O., and Prasad Y.V.R.K. Hot deformation behavior of as-cast Mg-2Zn-1Mn alloy in compression: a study with processing map. Mater Sci Eng A 362 (2003) 118-124
29. Wang C.Y., Wang X.J., Chang H., Wu K., and Zheng M.Y. Processing maps for hot working of ZK60 magnesium alloy. Mater Sci Eng A 464 (2007) 52-58
30. Yang Ping. Dependency of deformation twinning on grain orientation in an FCC and a HCP metal. Front Mater Sci China 1 (2007) 331-341
31. Dieter E. Mechanical metallurgy (1988), McGraw-Hill Press, London p. 133