Processing map for hot working of spray formed and hot isostatically pressed Al-Li alloy (UL40)

Journal of Materials Processing Technology

Volumn 209, Issue 18-19, 2009, Pages 5964-5972

  Jagan Reddy, G ^a   Srinivasan, N ^a   Gokhale, Amol A ^a   Kashyap, B P ^b  

^a DEFENCE METALLURGICAL RESEARCH LABORATORY   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY BOMBAY   (India)

Author keywords

Dynamic recovery; Hot deformation; Hot workability; Processing map

Indexed keywords

AL-LI ALLOYS; COMPRESSION TESTS; DEFORMATION CONDITIONS; DIMENSIONLESS PARAMETERS; DYNAMIC RECOVERY; EFFICIENCY INDEX; EXPERIMENTAL DATA; EXTENDED DYNAMICS; FLOW INSTABILITIES; FLOW LOCALIZATION; FORMED MATERIALS; HOT DEFORMATION; HOT DEFORMATION BEHAVIORS; HOT DUCTILITY; HOT WORKABILITY; IN-SITU; INSTABILITY CRITERION; MICRO-STRUCTURAL; MICROSTRUCTURAL MECHANISMS; PROCESSING MAP; PROCESSING MAPS; STRESS-STRAIN; UNSTABLE FLOWS;

ALUMINUM; COMPRESSION TESTING; DATA COMPRESSION; DEFORMATION; ENERGY DISSIPATION; GRAIN BOUNDARIES; LITHIUM ALLOYS; STRAIN RATE; WINDOWS;

HOT WORKING;

EID: 69249202327     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jmatprotec.2009.07.016     Document Type: Article

References (41)

1. Behnood N., and Evans J.T. Plastic deformation and the flow stress of Al-Li alloys. Acta Metall. 37 (1989) 687-695
2. Eddahbi M., Thomson C.B., Carreno F., and Ruano O.A. Grain structure and microstructure after high temperature deformation of an Al-Li (8090) alloy. Mater. Sci. Eng. A 284 (2000) 292-300
3. Flower H.M., and Gregson P.J. Solid state phase transformations in aluminium alloys containing lithium. Mater. Sci. Technol. 3 (1987) 81-89
4. Ghassan T.K., El-Gizawy S.A., and Richard L. Development of process maps for superplastic forming of weldalite™ 09. Mater. Sci. Eng. A 244 (1998) 224-232
5. Gokhale A.A., and Singh V. Effect of Zr content and mechanical working on the structure and tensile properties of AA8090 alloy plates. J. Mater. Process. Technol. 159 (2005) 369-376
6. Gokhale A.A., Vijaya S., Eswara Prasad N., Chakravorthy C.R., and Prasad Y.V.R.K. Process maps for Al-Li alloys. Proceedings of the 4th International Congress on Al Alloys, vol. II. Georgia Institute of Technology, Atlanta, Georgia, USA (1994) 242-248
7. Gregson P.J., and Flower H.M. Microstructure control of toughness in aluminium-lithium alloys. Acta Matall. 33 (1985) 527-537
8. Hogg S.C., Palmer I.G., Thomas L.G., and Grant R.S. Processing, microstructure and property aspects of a spray cast Al-Mg-Li-Zr alloy. Acta Mater. 55 (2007) 1885-1894
9. Hyang J.K., Kim J.N., Lee S., and Lee E.W. Superplastic deformation behavior of a rapidly solidified Al-Li alloy. Mater. Sci. Eng. A 256 (1998) 208-213
10. Jagan Reddy G., Srinivasan N., Gokhale A.A., and Kashyap B.P. Characterization of dynamic recovery during hot deformation of spray cast Al-Li alloy UL40 alloy. Mater. Sci. Technol. 24 6 (2008) 725-733
11. Jain V.K., Jata K.V., Rioja R.J., Morgan J.T., and Hopkins A.K. Processing of an experimental aluminium-lithium alloy for controlled microstructure. J. Mater. Process. Technol. 73 (1998) 108-118
12. James M.F. A Study of the effect of precipitation ageing on the deformation mechanisms, ductility response, and fracture behavior of an aluminium-lithium alloy. J. Adv. Mater. 38 4 (2006) 51-62
13. Jonas J.J., and Sakai T. In: George K. (Ed). Deformation, Processing and Structures (1982), American Society for Metals, Metals Park, OH, USA 185-243
14. Kaibyshev R., Shipilova K., Musin F., and Motohashi Y. Cont dynamic recrystallization in Al-Li-Mg-Sc alloy during equal channel angular extrusion. Mater. Sci. Eng. A 396 (2005) 341-351
15. Kashyap B.P., Fan W., and Chaturvedi M.C. Microstructural evolution during superplastic deformation of AA 8090 Al-Li alloy. Mater. Sci. Technol. 17 (2001) 237-248
16. McQueen H.J., Evangelista E., Bowler J., and Crawford G. Hot deformation and dynamic recrystallization of Al-5Mg-0.8Mn alloy. Metal Sci. 18 (1984) 395-402
17. McQueen H.J., Evangelista E., Jin N., and Kassener M.E. Energy dissipating efficiency in aluminum dependent on monotonic flow curves and dynamic recovery. Metall. Mater. Trans. A 26A (1995) 1757-1766
18. Menon S.S., and Rack H.J. Flow characterization of cast Al-2Li alloy. Proceedings of the 4th International Conference on Al Alloys, vol. II. Georgia Institute of Technology, Atlanta, Georgia, USA (1994) 230-237
19. Nieh I.G., and Wadsworth J. High strain rate superplasticity of a powder metallurgy, Zr modified 2124 aluminum alloy. Proceeding of the 4th International Conference on Al alloys, vol. II. Georgia Institute of Technology, Atlanta, Georgia, USA (1994) 48-55
20. 3Li) metastable solvus in aluminium-lithium alloys. Acta Mater. 46 (1998) 6163-6171
21. Ou B.L., Itoh G., and Kanno M. Precipitation of zirconium in Al-Li-Cu-Mg-Zr alloy. Proceedings of the 5th International Conference on Al-Li alloys. Georgia Institute of Technology, Atlanta, Georgia, Williamsburg, Virginia, USA (1989) 721-730
22. Prangnell P.B., Hulley S.I., and Palmer I.G. Microstructure and mechanical properties of hot rolled high Li content aluminum alloys processed by spray casting. Proceedings of the 4th International Conference on Al Alloys, vol. II. Georgia Institute of Technology, Atlanta, Georgia, USA (1994) 106-113
23. In: Prasad Y.V.R.K., and Sasidhara S. (Eds). Hot Working Guide: A Compendium of Processing Maps (1997), ASM International, Materials Park, OH, USA
24. Prasad Y.V.R.K., and Seshacharyulu T. Modeling of hot deformation for microstructural control. Int. Mater. Rev. 43 6 (1998) 243-258
25. Ravichandran N., and Prasad Y.V.R.K. Dynamic recrystallization during hot deformation of Al-a study using processing map. Metall. Trans. A 22A (1991) 2339-2348
26. Robert W.C. Thermo-mechanical Processing of Metallic Materials (2007), Pergomon, Jordan Hill, Oxford OX2 8DP, UK pp. 85-108
27. Roberts W. In: George K. (Ed). Deformation, Processing and Structures (1982), American Society for Metals, Metals Park, OH, USA 109-184
28. Sanders Jr. T.H., and Starke Jr. E.A. The physical metallurgy of aluminum-lithium alloys-a review. Proceedings of the 5th International Conference on Al-Li alloys. Georgia Institute of Technology, Williamsburg, Virginia, Atlanta, Georgia, USA (1989) 1-37
29. Shiva Prasad P., Venugopal S., Sridhar V., Maduraimuthu V., Vasudevan M., Mannan S.L., Prasad Y.V.R.K., and Chaturvedi R.C. Validation of processing maps for a 15Cr-15Ni-2.2Mo-0.3Ti austenitic stainless steel using hot forging and rolling tests. J. Mater. Process. Technol. 132 (2003) 262-268
30. Srinivasan M.N., and Goforth R.E. Studies on activation energy of superplastic dynamically recrystallized Al-Li alloys. Scripta Mater. 31 (1994) 1151-1156
31. Srinivasan N., and Prasad Y.V.R.K. Characterization of dynamic recrystallisation in nickel using processing map for hot deformation. Mater. Sci. Technol. 8 (1992) 206-212
32. Srinivasan M.N., Goforth N.R., and Balasubramanian E.R. Microstructure evolution of dynamically recrystallized superplastic Al-Li alloy. Mater. Character. 29 (1992) 397-406
33. Srinivasan N., Prasad Y.V.R.K., and Ramarao P. Hot deformation behaviour of Mg-3Al alloy-a study using processing map. Mater. Sci. Eng. A 476 (2008) 146-156
34. Starke Jr. E.A., Sanders Jr. T.H., and Palmer I.G. New approaches to alloy development in the Al-Li system. J. Metals (1981) 24-33
35. Wadsworth J., and Pelton A.R. Superplastic behavior of a powder source Al-Li based alloy. Scripta Metall. 18 (1984) 387-392
36. Wadsworth J., Henshall C.A., and Nieh T.G. Superplastic Al-Li alloys. Proceedings of the 3rd International Conference on Al-Li alloys (1985), University of Oxford, The Institute of Metals, UK 199-212
37. Wadsworth J., Palmer I.G., and Crooks D.D. Superplasticity in Al-Li based alloys. Scripta Metall. 17 (1988) 347-352
38. Williams D.B. The binary aluminium-lithium phase diagram. Proceeding of the 5th International Conference on Al-Li alloys. Georgia Institute of Technology, Williamsburg, Virginia, Atlanta, Georgia, USA (1989) 551-570
39. Yaney D.L. Ultralow density, high stiffness Al-Li-X alloy for aerospace structural applications. Al-Li alloys for aerospace applications. Proceedings of the International Conference on Advanced Earth to Orbit Propulsion Technology. NASA Marshal SFE (1994) 73-81
40. 3, 9 silicon bronze microstructure. J. Mater. Process. Technol. 159 (2005) 377-382
41. Zhao D., and Prabir K.C. Hot compression behavior of wrought Al 6061. Proceedings of the 4th International Conference on Al alloys, vol. I. Institute of Technology, Atlanta, Georgia, USA (1994) 426-433