Predictive direct virtual torque and power control of doubly fed induction generators for fast and smooth grid synchronization and flexible power regulation

IEEE Transactions on Power Electronics

Volumn 28, Issue 7, 2013, Pages 3182-3194

  Hu, Jiefeng ^a   Zhu, Jianguo ^a   Zhang, Yongchang ^b   Platt, Glenn ^c   Ma, Qishuang ^d   Dorrell, David G ^a  

^a UNIVERSITY OF TECHNOLOGY SYDNEY   (Australia)

^b NORTH CHINA UNIVERSITY OF TECHNOLOGY   (China)

^c CSIRO   (Australia)

^d BEIHANG UNIVERSITY   (China)

Author keywords

Doubly fed induction generator; Flexible power regulation; Grid synchronization; Predictive direct torque control (DTC); Virtual torque

Indexed keywords

CONSTANT SWITCHING FREQUENCY; CONTROL STRATEGIES; CONTROL SYSTEM STRUCTURE; DIGITAL IMPLEMENTATION; DIRECT POWER CONTROL; DOUBLY FED INDUCTION GENERATOR (DFIG); FURTHER DEVELOPMENT; GRID-CONNECTED MODES; MATLAB /SIMULINK; NO LOAD; POWER CONTROL STRATEGIES; POWER REGULATION; PREDICTIVE DIRECT TORQUE CONTROL; REACTIVE POWER REGULATION; ROTOR POSITION; SENSORLESS; STEADY STATE; SWITCHING TABLES; TRANSIENT PERFORMANCE; VIRTUAL TORQUE;

ASYNCHRONOUS GENERATORS; POWER CONTROL; REACTIVE POWER; SYNCHRONIZATION; TORQUE CONTROL;

ENERGY POLICY;

EID: 84872037681     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2012.2219321     Document Type: Article

References (46)

1. S. Foster, L. Xu, and B. Fox, "Coordinated reactive power control for facilitating fault ride through of doubly fed induction generator-and fixed speed induction generator-based wind farms," IET Renewable Power Gener., vol. 4, no. 2, pp. 128-138, Mar. 2010.
2. M. Shahabi, M. R. Haghifam, M. Mohamadian, and S. A. N-Niaki, "Microgrid dynamic performance improvement using a doubly fed induction wind generator," IEEE Trans. Energy Convers., vol. 24, no. 1, pp. 137-145, Mar. 2009.
3. C. Wessels, F. Gebhardt, and F. W. Fuchs, "Fault ride-through of a DFIG wind turbine using a dynamic voltage restorer during symmetrical and asymmetrical grid faults," IEEE Trans. Power Electron., vol. 26, no. 3, pp. 807-815, Mar. 2011.
4. V. T. Phan and H. H. Lee, "Control strategy for harmonic elimination in stand-alone DFIG applications with nonlinear loads," IEEE Trans. Power Electron., vol. 26, no. 9, pp. 2662-2675, Sep. 2011.
5. M. Mohseni and S. M. Islam, "Transient control of DFIG-based wind power plants in compliance with the Australian grid code," IEEE Trans. Power Electron., vol. 27, no. 6, pp. 2813-2824, Jun. 2012.
6. C. Wessels, F. Gebhardt, and F. W. Fuchs, "Fault ride-through of a DFIG wind turbine using a dynamic voltage restorer during symmetrical and asymmetrical grid faults," IEEE Trans. Power Electron., vol. 26, no. 3, pp. 807-815, Mar. 2011.
7. R. I. Bojoi, L. R. Limongi, D. Roiu, and A. Tenconi, "Enhanced power quality control strategy for single phase inverters in distributed generation systems," IEEE Trans. Power Electron., vol. 26, no. 3, pp. 798-806, Mar. 2011.
8. R. Pena, J. C. Clare, and G. M. Asher, "Doubly-fed induction generator using back-to-back PWM converters and its application to variable-speed wind-energy generation," IEE Proc. Electr. Power Appl., vol. 143, no. 3, pp. 231-241, May 1996. (Pubitemid 126760209)
9. L. Morel, H. Godfroid, A. Mirzaian, and J. M. Kauffmann, "Doublyfed induction machine: Converter optimization and field oriented control without position sensor," IEE Proc. Electr. Power Appl., vol. 145, no. 4, pp. 360-368, Jul. 1998. (Pubitemid 128728086)
10. R. Datta and V. T. Ranganthan, "A simple position-sensorless algorithm for rotor-side field-oriented control of wound-rotor induction machine," IEEE Trans. Ind. Electron., vol. 48, no. 4, pp. 786-793, Aug. 2001. (Pubitemid 32780047)
11. R. W. De Doncker, S. Muller, and M. Deicke, "Doubly fed induction generator systems for wind turbines," IEEE Mag. Ind. Appl., vol. 8, no. 3, pp. 26-33, May/Jun. 2002. (Pubitemid 34630524)
12. G. S. Buja and M. P. Kazmierkowski, "Direct torque control of PWM inverter-fed AC motors-A survey," IEEE Trans. Ind. Electron., vol. 51, no. 4, pp. 744-757, Aug. 2004.
13. S. Arnalte, J. Burgos, and J. Rodriguez-Amenedo, "Direct torque control of a doubly-fed induction generator for variable speed wind turbines," Electr. Power Compon. Syst., vol. 30, no. 2, pp. 199-216, 2002. (Pubitemid 34566901)
14. R. Datta and V. T. Ranganathan, "Direct power control of grid-connected wound rotor induction machine without rotor position sensors," IEEE Trans. Power. Electron., vol. 16, no. 3, pp. 390-399, May 2001. (Pubitemid 32534596)
15. L. Xu and P. Cartwright, "Direct active and reactive power control of DFIG for wind energy generation," IEEE Trans. Energy. Convers., vol. 21, no. 3, pp. 750-758, Sep. 2006. (Pubitemid 46445164)
16. Y.-S. Lai and J.-H. Chen, "A new approach to direct torque control of induction motor drives for constant inverter frequency and torque ripple reduction," IEEE Trans. Energy. Convers., vol. 16, no. 3, pp. 220-227, Sep. 2001. (Pubitemid 32780113)
17. C. Lascu and A. M. Trzynadlowski, "Combining the principles of sliding mode, direct torque control, and space-vector modulation in a highperformance sensorless AC drive," IEEE Trans. Ind. App., vol. 40, no. 1, pp. 170-177, Jan./Feb. 2004.
18. G. Abad,M. A. Rodriguez, and J. Poza, "Two-level VSC based predictive direct torque control of the doubly fed induction machine with reduced torque and flux ripples at low constant switching frequency," IEEE Trans. Power. Electron., vol. 23, no. 3, pp. 1050-1061, May 2008. (Pubitemid 351756682)
19. D. Zhi, L. Xu, and B. W.Williams, "Model-based predictive direct power control of doubly fed induction generators," IEEE Trans. Power. Electron., vol. 25, no. 2, pp. 341-351, Feb. 2010.
20. J. Hu, J. Zhu, Y. Zhang, Q. Ma, and Y. Guo, "Simple and robust predictive direct control of DFIG with low constant switching frequency and reduced torque and flux ripples," in Proc. IEEE Int. Electr.Mach. and Drives Conf., 2011, pp. 781-786.
21. J. Hu, L. Shang, Y. He, and Z. Zhu, "Direct active and reactive power regulation of grid-connected DC/ACconverters using slidingmode control approach," IEEE Trans. Power Electron., vol. 26, no. 1, pp. 210-222, Jan. 2011.
22. J. Yang, J. E. Fletcher, and J. O'Reilly, "A series-dynamic- resistor-based converter protection scheme for doubly-fed induction generator during various fault conditions," IEEE Trans. Energy Convers., vol. 25, no. 2, pp. 422-432, Jun. 2010.
23. G. Yuan, J. Chai, and Y. Li, "Vector control and synchronization of doubly fed induction wind generator system," in Proc. 4th Int. Power Electron. Motion Control Conf., Aug. 2004, vol. 2, pp. 886-890. (Pubitemid 40539856)
24. F. Blaabjerg, R. Teodorescu, M. Liserre, and A. V. Timbus, "Overview of control and grid synchronization for distributed power generation systems," IEEE Trans. Ind. Electron., vol. 53, no. 5, pp. 1398-1409, Oct. 2006. (Pubitemid 44593490)
25. X. Zhang, D. Xu, Y. Lang, and H. Ma, "Study on stagewise control of connecting dfig to the grid," in Proc. CES/IEEE 5th Int. Power Electron. Motion Control Conf., Aug. 2006, vol. 1, pp. 1-5.
26. J. Park, K. Lee, and D. Kim, "Control method of a doubly-fed induction generatorwith automatic grid synchronization," in Proc. Annu. Conf. IEEE Ind. Electron., Nov. 2006, pp. 4254-4259.
27. G. Iwanski andW. Koczara, "Synchronization and mains outage detection for controlled grid connection of the wind driven variable speed power generation system," in Proc. IEEE Clean Electr. Power Conf., May 2007, pp. 585-590. (Pubitemid 47592377)
28. S. Z. Chen, N. C. Cheung, K. C. Wong, and J. Wu, "Grid synchronization of doubly-fed induction generator using integral variable structure control," IEEE Trans. Energy Convers., vol. 24, no. 4, pp. 875-883, Dec. 2009.
29. S. A. Gomez and J. L. R. Amenedo, "Grid synchronisation of doubly fed induction generators using direct torque control," in Proc. Annu. Conf. IEEE Ind. Electron., Nov. 2002, pp. 3338-3343.
30. J. Arbi, M. J.-B. Ghorbal, I. Slama-Belkhodja, and L. Charaabi, "Direct virtual torque control for doubly fed induction generator grid connection," IEEE Trans. Ind. Electron., vol. 56, no. 10, pp. 4163-4173, Oct. 2009.
31. J.-B. G. Manel, J. Arbi, and S.-B. Ilhem, "A novel approach of direct active and reactive power control allowing the connection of the DFIG to the grid," in Proc. IEEE Power Electron. Appl. Conf., Sep. 2009, pp. 1-10.
32. P. Cortes, M. P. Kazmierkowski, R. M. Kennel, D. E. Quevedo, and J. Rodriguez, "Predictive control in power electronics and drives," IEEE Trans. Ind. Electron, vol. 55, no. 12, pp. 4312-4324, Dec. 2008.
33. T. Geyer, G. Papafotiou, and M. Morari, "Model predictive direct torque control-Part I: Concept, algorithm, and analysis," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1894-1905, Jun. 2009.
34. S. Kouro, P. Cortes, R. Vargas, U. Ammann, and J. Rodriguez, "Model predictive control-A simple and powerful method to control power converters," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1826-1838, Jun. 2009.
35. A. J. Filho, M. E. Filho, and E. R. Filho, "A predictive power control for wind energy," IEEE Trans. Sustainable Energy, vol. 2, no. 1, pp. 97-105, Jan. 2011.
36. S. A. Davari, D. A. Khaburi, F. Wang, and R. M. Kennel, "Using full order and reduced order observers for robust sensorless predictive torque control of induction motors," IEEE Trans. Power Electron., vol. 27, no. 7, pp. 3424-3433, Jul. 2012.
37. Y. Zhang and J. Zhu, "A novel duty cycle control strategy to reduce both torque and flux ripples for DTC of permanent magnet synchronous motor drives with switching frequency reduction," IEEE Trans. Power Electron., vol. 26, no. 10, pp. 3055-3067, Oct. 2011.
38. D. E. Quevedo, R. P. Aguilera, M. A. Perez, P. Cortes, and R. Lizana, "Model predictive control of an AFE rectifier with dynamic references," IEEE Trans. Power Electron., vol. 27, no. 7, pp. 3128-3136, Jul. 2012.
39. J. Hu, J. Zhu, Y. Zhang et al., "Predictive direct control of doubly fed induction generator for grid synchronization in wind power generation," in Proc. IEEE Energy Convers. Congr. Expo., Sep. 2011, pp. 2381-2388.
40. E. Levi, "Impact of iron loss on behavior of vector controlled induction machines," IEEE Trans. Ind. Appl., vol. 31, no. 6, pp. 1287-1296, Nov./Dec. 1995.
41. S. D. Wee, M. H. Shin, and D. S. Hyun, "Stator-flux-oriented control of inductionmotor considering iron loss," IEEE Trans. Ind. Electron., vol. 48, no. 3, pp. 602-608, Jun. 2001.
42. K. Yamazaki and N. Fukushima, "Iron loss model for rotating machines using direct eddy current analysis in electrical steel sheets," IEEE Trans. Energy Convers., vol. 25, no. 3, pp. 633-641, Sep. 2010.
43. F. Wang, J. L. Duarte, and M. A. M. Hendrix, "Grid-interfacing converter systems with enhanced voltage quality for microgrid application-Concept and implementation," IEEE Trans. Power Electron., vol. 26, no. 12, pp. 3501-3513, Dec. 2011.
44. Y. Mohamed, H. H. Zeineldin, M. M. M. Salama, and R. R. Seethapathy, "Seamless formation and robust control of distributed generation microgrids via voltage control and optimized dynamic power sharing," IEEE Trans. Power Electron., vol. 27, no. 3, pp. 1283-1294, Mar. 2012.
45. C. Cho, J. Jeon, J. Kim, S. Kwon, K. Park, and S. Kim, "Active synchronizing control of a microgrid," IEEE Trans. Power Electron., vol. 26, no. 12, pp. 3707-3719, Dec. 2011.
46. J. Beerten, J. Verveckken, and J. Driesen, "Predictive direct torque control for flux and torque ripple reduction," IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 404-412, Jan. 2010.