A novel duty cycle control strategy to reduce both torque and flux ripples for DTC of permanent magnet synchronous motor drives with switching frequency reduction

IEEE Transactions on Power Electronics

Volumn 26, Issue 10, 2011, Pages 3055-3067

  Zhang, Yongchang ^a   Zhu, Jianguo ^b  

^a BEIJING UNIVERSITY OF TECHNOLOGY   (China)

^b UNIVERSITY OF TECHNOLOGY SYDNEY   (Australia)

Author keywords

Duty cycle; ripple reduction; switching frequency reduction; synchronous motor drives; torque control

Indexed keywords

COMPARATIVE STUDIES; DIGITAL IMPLEMENTATION; DIRECT TORQUE CONTROL; DUTY CYCLE CONTROL; DUTY CYCLES; DUTY RATIOS; FLUX RIPPLE; LARGE TORQUE; MACHINE PARAMETERS; NOVEL METHODS; PERFORMANCE IMPROVEMENTS; PERMANENT MAGNET SYNCHRONOUS MOTOR; PERMANENT MAGNET SYNCHRONOUS MOTOR DRIVES; RIPPLE REDUCTION; STATOR CURRENTS; SWITCHING SEQUENCE; SWITCHING TABLES; SYNCHRONOUS MOTOR DRIVES; TORQUE RIPPLES;

ELECTRIC DRIVES; ELECTRIC MOTORS; MAGNETIC DEVICES; PERMANENT MAGNETS; SWITCHING FREQUENCY; TORQUE; TORQUE CONTROL; VECTORS;

SYNCHRONOUS MOTORS;

EID: 80054682882     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2011.2129577     Document Type: Article

References (31)

1. I. Takahashi and T. Noguchi, "A new quick-response and high-efficiency control strategy of an induction motor," IEEE Trans. Ind. Appl., vol. IA-22, no. 5, pp. 820-827, Sep. 1986. (Pubitemid 17468606)
2. M. Depenbrock, "Direct self-control (DSC) of inverter-fed induction machine," IEEE Trans. Power Electron. vol. 3, no. 4, pp. 420-429, Oct. 1988.
3. L. Zhong, M. Rahman, W. Hu, and K. Lim, "Analysis of direct torque control in permanent magnet synchronous motor drives," IEEE Trans. Power Electron., vol. 12, no. 3, pp. 528-536, May 1997. (Pubitemid 127763204)
4. G. H. B. Foo and M. F. Rahman, "Direct torque control of an IPMsynchronous motor drive at very low speed using a sliding-mode stator flux observer," IEEE Trans. Power Electron., vol. 25, no. 4, pp. 933-942, Apr. 2010.
5. S. Arnalte, J. Burgos, and J. Rodriguez-Amenedo, "Direct torque control of a doubly-fed induction generator for variable speed wind turbines," Elect. Power Compon. Syst., vol. 30, no. 2, pp. 199-216, 2002.
6. R. Morales-Caporal and M. Pacas, "Encoderless predictive direct torque control for synchronous reluctance machines at very low and zero speed," IEEE Trans. Ind. Electron., vol. 55, no. 12, pp. 4408-4416, Dec. 2008.
7. T. Habetler, F. Profumo, M. Pastorelli, and L. Tolbert, "Direct torque control of induction machines using space vector modulation," IEEE Trans. Ind. Appl., vol. 28, no. 5, pp. 1045-1053, Sep./Oct. 1992. (Pubitemid 23555888)
8. B. Kenny and R. Lorenz, "Stator-and rotor-flux-based deadbeat direct torque control of induction machines," IEEE Trans. Ind. Appl., vol. 39, no. 4, pp. 1093-1101, Jul./Aug. 2003.
9. L. Tang, L. Zhong, M. Rahman, and Y. Hu, "A novel direct torque controlled interior permanent magnet synchronous machine drive with low ripple in flux and torque and fixed switching frequency," IEEE Trans. Power Electron., vol. 19, no. 2, pp. 346-354, Mar. 2004.
10. Y. Zhang, Z. Zhao, T. Lu, and L. Yuan, "Sensorless 3-level inverter-fed induction motor drive based on indirect torque control," in Proc. IEEE 6th Int. Power Electron. Motion Control Conf., 2009, pp. 589-593.
11. Y.-S. Lai and J.-H. Chen, "A new approach to direct torque control of induction motor drives for constant inverter switching frequency and torque ripple reduction," IEEE Trans. Energy Convers., vol. 16, no. 3, pp. 220-227, Sep. 2001. (Pubitemid 32780113)
12. C. Lascu and A. Trzynadlowski, "Combining the principles of sliding mode, direct torque control, and space-vector modulation in a high-performance sensorless ac drive," IEEE Trans. Ind. Appl. vol. 40, no. 1, pp. 170-177, Jan./Feb. 2004.
13. Y. Zhang, J. Zhu, W. Xu, J. Hu, D. G. Dorrell, and Z. Zhao, "Speed sensorless stator flux oriented control of three-level inverter-fed induction motor drive based on fuzzy logic and sliding mode control," in Proc. 36th IEEE IECON, 2010, pp. 2926-2931.
14. Y. Zhang, J. Zhu, W. Xu, and Y. Guo, "A simple method to reduce torque ripple in direct torque-controlled permanent-magnet synchronous motor by using vectors with variable amplitude and angle," IEEE Trans. Ind. Electron., vol. 58, no. 7, pp. 2848-2859, 2011.
15. H. Miranda, P. Cortes, J. Yuz, and J. Rodriguez, "Predictive torque control of induction machines based on state-space models," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1916-1924, Jun. 2009.
16. T. Geyer, G. Papafotiou, and M. Morari, "Model predictive direct torque control-Part I: Concept, algorithm, and analysis," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1894-1905, Jun. 2009.
17. S. Kouro, P. Cortes, R. Vargas, U. Ammann, and J. Rodriguez, "Model predictive control-a simple and powerful method to control power converters," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1826-1838, Jun. 2009.
18. F. Morel, J.-M. Retif, X. Lin-Shi, and C. Valentin, "Permanent magnet synchronous machine hybrid torque control," IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 501-511, Feb. 2008. (Pubitemid 351344223)
19. K. Drobnic, M. Nemec, D. Nedeljkovic, and V. Ambrozic, "Predictive direct control applied to AC drives and active power filter," IEEE Trans. Ind. Electron., vol. 56, no. 6, pp. 1884-1893, Jun. 2009.
20. Y. Zhang, J. Zhu, and W. Xu, "Predictive torque control of permanent magnet synchronous motor drive with reduced switching frequency," in Proc. Int. Conf. Electr. Mach. Syst., 2010, pp. 798-803.
21. D. Casadei, F. Profumo, G. Serra, and A. Tani, "FOC and DTC: Two viable schemes for induction motors torque control," IEEE Trans. Power Electron., vol. 17, no. 5, pp. 779-787, Sep. 2002. (Pubitemid 35241902)
22. Y. Zhang, J. Zhu, Z. Zhao, W. Xu, and D. G. Drroell, "An improved direct torque control for three-level inverter-fed inductionmotor sensorless drive," IEEE Trans. Power Electron., vol. 26, no. 7, Jul. 2011.
23. J.-K. Kang and S.-K. Sul, "New direct torque control of induction motor for minimum torque ripple and constant switching frequency," IEEE Trans. Ind. Appl., vol. 35, no. 5, pp. 1076-1082, Sep./Oct. 1999. (Pubitemid 32262082)
24. K.-B. Lee, J.-H. Song, I. Choy, and J.-Y. Yoo, "Torque ripple reduction in DTC of induction motor driven by three-level inverter with low switching frequency," IEEE Trans. Power Electron, vol. 17, no. 2, pp. 255-264, Mar. 2002. (Pubitemid 34307380)
25. K.-K. Shyu, J.-K. Lin, V.-T. Pham, M.-J. Yang, and T.-W. Wang, "Global minimum torque ripple design for direct torque control of induction motor drives," IEEE Trans. Ind. Electron., vol. 57, no. 9, pp. 3148-3156, Sep. 2010.
26. M. Pacas and J. Weber, "Predictive direct torque control for the PM synchronous machine," IEEE Trans. Ind. Electron., vol. 52, no. 5, pp. 1350-1356, Oct. 2005. (Pubitemid 41489378)
27. E. Flach, R. Hoffmann, and P. Mutschler, "Direct mean torque control of an induction motor," in Proc. EPE, 1997, vol. 3, pp. 672-677.
28. L. Romeral, A. Arias, E. Aldabas, and M. Jayne, "Novel direct torque control (DTC) scheme with fuzzy adaptive torque-ripple reduction," IEEE Trans. Ind. Electron., vol. 50, no. 3, pp. 487-492, Jun. 2003.
29. G. Abad, M. A. Rodriguez, and J. Poza, "Two-level VSC based predictive direct torque control of the doubly fed induction machine with reduced torque and flux ripples at low constant switching frequency," IEEE Trans. Power Electron., vol. 23, no. 3, pp. 1050-1061, May 2008. (Pubitemid 351756682)
30. Y. Zhang and J. Zhu, "Direct torque control of permanent magnet synchronous motor with reduced torque ripple and commutation frequency," IEEE Trans. Power Electron., vol. 26, no. 1, pp. 235-248, Jan. 2011.
31. M. Hinkkanen and J. Luomi, "Modified integrator for voltage model flux estimation of induction motors," IEEE Trans. Ind. Electron. vol. 50, no. 4, pp. 818-820, Aug. 2003.