Transport in deformable hygroscopic porous media during microwave puffing

AIChE Journal

Volumn 59, Issue 1, 2013, Pages 33-45

  Rakesh, Vineet ^a   Datta, Ashim K ^a  

^a Department of Biological and Environmental Engineering   (United States)

Author keywords

Finite element method; Hyperelastic; Large deformation; Microwave puffing; Multiphase flow; Porous media

Indexed keywords

ARBITRARY LAGRANGIAN EULERIAN; CRITICAL INPUTS; HYPER ELASTIC; INTERNAL PRESSURES; LARGE DEFORMATIONS; LIQUID WATER; MODEL PREDICTION; MULTIPHASE TRANSPORT; PRESSURE-DRIVEN FLOWS; RAPID-HEATING; STRUCTURAL CHANGE; TRANSPORT PROCESS; TWO-WAY COUPLING;

FINITE ELEMENT METHOD; FOOD PRODUCTS; MULTIPHASE FLOW; POROUS MATERIALS; UNCERTAINTY ANALYSIS;

DEFORMATION;

NEPTUNIA;

EID: 84871658970     PISSN: 00011541     EISSN: 15475905     Source Type: Journal    
DOI: 10.1002/aic.13793     Document Type: Article

References (67)

1. Payne FA, Taraba JL, Saputra D. Review of puffing processes for expansion of biological products. J Food Eng. 1989;10(3):183-197.
2. McAlister RE. Microwave puffing of cereal grain and products made therefrom. U.S. Patent 3, 682, 651, 1972.
3. Krysiak DLM, Allen PE, Kirihara TT. Laminated multi-layered cereal products and methods of preparation. U.S. Patent 6, 746, 707, 2004.
4. Varnalis AI, Brennan JG, MacDougall DB. Proposed mechanism of high-temperature puffing of potato. Part I. The influence of blanching and drying conditions on the volume of puffed cubes. J Food Eng. 2001;48(4):361-367.
5. Liang S, Yin JY, Xue SF. The ALE method for oil/water two-phase flow in deforming porous media. J Can Petroleum Technol. 2009;48(4):72-77.
6. Lewis RW, Schrefler BA. The Finite Element Method in the Deformation and Consolidation of Porous Media, West Sussex, England: Wiley, 1987.
7. Choi JY, Tanenbaum BS, Milner TE, Dao XV, Nelson JS, Sobol EN, Wong RJF. Thermal, mechanical, optical, and morphologic changes in bovine nucleus pulposus induced by Nd : YAG (lambda = 1.32 mu m) laser irradiation. Lasers Surg Med. 2001;28(3):248-254.
8. Wu PJ, Schwartzberg HG. Popping behavior and zein coating of popcorn. Cereal Chem. 1992;69(5):567-573.
9. Chandrasekhar PR, Chattopadhyay PK. Rice puffing in relation to its varietal characteristics and processing conditions. J of Food Process Eng. 1991;14(4):261-277.
10. Hoke K, Housova J, Houska M. Optimum conditions of rice puffing. Czech J of Food Sci. 2005;23(1):1-11.
11. Saputra D, Payne FA, Cornelius PL. Puffing dehydrated green bell peppers with carbon dioxide. Trans ASAE. 1991;34(2):475-480.
12. Nath A, Chattopadhyay PK. Effect of process parameters and soy flour concentration on quality attributes and microstructural changes in ready-to-eat potato-so snack using high-temperature short time air puffing. LWT-Food Sci Technol. 2008;41(4):707-715.
13. Antonio GC, Alves DG, Azoubel PM, Murr FEX, Park KJ. Influence of osmotic dehydration and high temperature short time processes on dried sweet potato (Ipomoea batatas Lam.). J Food Eng. 2008;84(3):375-382.
14. Mariotti M, Alamprese C, Pagani MA, Lucisano M. Effect of puffing on ultrastructure and physical characteristics of cereal grains and flours. J Cereal Sci. 2006;43(1):47-56.
15. 2. Trans ASABE. 1992;35(6):1935-1940.
16. Zapotoczny P, Markowski M, Majewska K, Ratajski A, Konopko H. Effect of temperature on the physical, functional, and mechanical characteristics of hot-air-puffed amaranth seeds. J Food Eng. 2006;76(4):469-476.
17. Schwartzberg HG, Wu JPC, Nussinovitch A, Mugerwa J. Modelling deformation and flow during vapor-induced puffing. J Food Eng. 1995;25(3):329-372.
18. Chiotellis E, Campbell GM. Proving of bread dough I-modelling the evolution of the bubble size distribution. Food Bioprod Process. 2003;81(C3):194-206.
19. Fan JT, Mitchell JR, Blanshard JMV. A model for the oven rise of dough during baking. J Food Eng. 1999;41(2):69-77.
20. Alavi SH, Rizvi SSH, Harriott P. Process dynamics of starch-based microcellular foams produced by supercritical fluid extrusion. I: model development. Food Res Int. 2003;36(4):309-319.
21. Wang LJ, Ganjyal GM, Jones DD, Weller CL, Hanna MA. Modeling of bubble growth dynamics and nonisothermal expansion in starch-based foams during extrusion. Adv in Polym Technol. 2005;24(1):29-45.
22. Halder A, Dhall A, Datta AK. An improved, easily implementable, porous media based model for deep-fat frying-Part I: Model development and input parameters. Food and Bioprod Process. 2007;85(C3):209-219.
23. Ni H, Datta AK, Torrance KE. Moisture transport in intensive microwave heating of biomaterials: a multiphase porous media model. Int J Heat Mass Transfer. 1999;42(8):1501-1512.
24. Rakesh V, Datta AK, Walton JH, McCarthy KL, McCarthy MJ. Microwave combination heating: coupled electromagnetics-multiphase porous media modeling and MRI experimentation. AIChE J. 2012;58(4):1262-1278. DOI: 10.1002/aic.12659.
25. Yamsaengsung R, Moreira RG. Modeling the transport phenomena and structural changes during deep fat frying-Part 1: model development. J Food Eng. 2002;53(1):1-10.
26. Turner IW, Perre P. Vacuum drying of wood with radiative heating: II. comparison between theory and experiment. AIChE J. 2004;50(1):108-118.
27. Shi X, Datta AK, Mukherjee Y. Thermal stresses from large volumetric expansion during freezing of biomaterials. J Biomech Eng-Trans ASME. 1998;120(6):720-726.
28. Baek S, Wells PB, Rajagopal KR, Humphrey JD. Heat-induced changes in the finite strain viscoelastic behavior of a collaagenous tissue. J Biomech Eng-Trans ASME. 2005;127(4):580-586.
29. Niamnuy C, Devahastin S, Soponronnarit S, Raghavan GSV. Modeling coupled transport phenomena and mechanical deformation of shrimp during drying in a jet spouted bed dryer. Chem Eng Sci. 2008;63(22):5503-5512.
30. Ressing H, Ressing M, Durance T. Modeling the mechanisms of dough puffing during vacuum microwave drying using the finite element method. J Food Eng. 2007;82(4):498-508.
31. Minkoff SE, Kridler NM. A comparison of adaptive time stepping methods for coupled flow and deformation modeling. Appli Math Modell. 2006;30(9):993-1009.
32. Itaya Y, Kobayashi T, Hayakawa KI. 3-Dimensional heat and moisture transfer with viscoelastic strain-stress formation in composite food during drying. Int J Heat Mass Transfer. 1995;38(7):1173-1185.
33. Irudayaraj J, Haghighi K. Stress-analysis of viscoelastic materials during drying .1. Theory and finite-element formulation. Drying Technol. 1993;11(5):901-927.
34. Perre P, Turner IW, Passard J. 2-D solution for drying with internal vaporization of anisotropic media. AIChE J. 1999;45(1):13-26.
35. Yang DQ, Rahardjo H, Leong EC, Choa V. Coupled model for heat, moisture, air flow, and deformation problems in unsaturated soils. J Eng Mech-ASCE. 1998;124(12):1331-1338.
36. Mayor L, Sereno AM. Modelling shrinkage during convective drying of food materials: a review. J Food Eng. 2004;61(3):373-386.
37. Di Y, Yang J, Sato T. An operator-split ALE model for large deformation analysis of geomaterials. Int J Numer Anal Methods Geomech. 2007;31(12):1375-1399.
38. Bollada PC. Expansion of elastic bodies with application in the bread industry. Math Comput Modell. 2008;48(7-8):1055-1067.
39. Khalili N. Two-phase fluid flow through fractured porous media with deformable matrix. Water Res Res. 2008; 44.
40. Chao L, Borja RI, Regueiro RA. Dynamics of porous media at finite strain. Comput Methods Appl Mech Eng. 2004;193(36-38):3837-3870.
41. Zhang J, Datta AK, Mukherjee S. Transport processes and large deformation during baking of bread. AIChE J. 2005;51(9):2569-2580.
42. Biot MA. Mechanics of Incremental Deformations, New York, NY: Wiley, 1965.
43. Coussy O. Poromechanics, West Sussex, England: Wiley, 2004.
44. Belytschko T, Liu WK, Moran B. Nonlinear Finite Elements for Continua and Structures, West Sussex, England: Wiley, 2001.
45. Donea J, Huerta A, Ponthot JP, Rodríguez-Ferran Arbitrary Lagrangian-Eulerian methods. In: Stein E, Borst RD, Hughes TJR, editors. Encyclopedia of Computational Mechanics, Vol. 1. West Sussex, England: Wiley, 2004.
46. Bear J. Dynamics of Fluids in Porous Media, New York, NY: Dover Publications Inc, 1972.
47. Datta AK. Porous media approaches to studying simultaneous heat and mass transfer in food processes. I: Problem formulations. J Food Eng. 2007;80(1):80-95.
48. Ni H, Datta AK. Heat and moisture transfer in baking of potato slabs. Drying Technol. 1999;17(10):2069-2092.
49. Choi Y, Okos MR. Thermal properties of liquid foods review. In: Okos MR, editor. Physical and Chemical Properties of Food, St Joseph, MI: American Society of Agricultural Engineers, 1986:35-77.
50. Ratti C, Crapiste GH, Rotstein E. A new water sorption equilibrium expression for solid foods based on thermodynamic considerations. J Food Sci. 1989;54(3):738-747.
51. Jarvis MC, Mackenzie E, Duncan HJ. The Textural Analysis of cooked potato. 2. Swelling pressure of starch during gelatinization. Potato Res. 1992;35(2):93-102.
52. Blaszczak W, Sadowska J, Fornal J, Vacek J, Flis B, Zagorski-Ostoja W. Influence of cooking and microwave heating on microstructure and mechanical properties of transgenic potatoes. Nahrung-Food. 2004;48(3):169-176.
53. Alvarez MD, Canet W. Kinetics of thermal softening of potato tissue heated by different methods. Euro Food Res Technol. 2001;212(4):454-464.
54. Ni H. Multiphase moisture transport in porous media under intensive microwave heating. PhD Thesis. Cornell University, 1997.
55. Shames IH, Pitarresi JM. Introduction to Solid Mechanics, 3rd ed. Upper Saddle River, NJ: Prentice Hall, 1999.
56. Simo JC, Hughes TJR. Computational Inelasticity, New York, NY: Springer-Verlag Inc, 1998.
57. Solomon WK, Jindal VK. Relationship between texture of raw and cooked potatoes. J Text Stud. 2005;36(5-6):589-604.
58. Krokida MK, Maroulis ZB. The effect of drying methods on viscoelastic behaviour of dehydrated fruits and vegetables. Int J Food Sci Technol. 2000;35(4):391-400.
59. Buffler CR. Microwave Cooking and Processing: Engineering Fundamentals for the Food Scientist, New York: Van Nostrand Reinhold, 1993: 4-31, 157-159
60. Zhang H, Datta AK. Microwave power absorption in single- and multiple-item foods. Food Bioprod Process. 2003;81(C3):257-265.
61. AACC. Approved methods of the AACC. Method 74-09, St. Paul, MN: American Association of Cereal Chemists, 1988.
62. Varnalis AI, Brennan JG, MacDougall DB, Gilmour SG. Optimisation of high temperature puffing of potato cubes using response surface methodology. J Food Eng. 2004;61(2):153-163.
63. Bell LN, Labuza TP. Practical Aspects of Moisture Sorption Isotherm Measurement and Use, 2nd Ed. Egan, MN: AACC Egan Press, 2000.
64. Rizvi SSH. Thermodynamic properties of foods in dehydration. In: Rao MA, Rizvi SSH, Datta AK editors. Engineering Properties of Foods, 3rd Ed. Boca Raton, FL: CRC Press, 2005.
65. Datta AK. Hydraulic permeability of food tissues. Int J Food Properties. 2006;9(4):767-780.
66. Rabin Y. A general model for the propagation of uncertainty in measurements into heat transfer simulations and its application to cryosurgery. Cryobiology. 2003;46(2):109-120.
67. Holman JP. Experimental Methods for Engineers, 7th Ed. New York: McGraw-Hill, 2001.