Bio-patch design and implementation based on a low-power system-on-chip and paper-based inkjet printing technology

IEEE Transactions on Information Technology in Biomedicine

Volumn 16, Issue 6, 2012, Pages 1043-1050

  Yang, Geng ^a   Xie, Li ^a   Mäntysalo, Matti ^b   Chen, Jian ^a,c   Tenhunen, Hannu ^a   Zheng, Li Rong ^a,d  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

^b TAMPERE UNIVERSITY OF TECHNOLOGY   (Finland)

^c ERICSSON RESEARCH   (Sweden)

^d FUDAN UNIVERSITY   (China)

Author keywords

Bio Patch; Bioelectric system on chip (SoC); electrocardiogram (ECG); electromyogram (EMG); paper based inkjet printing technology; sensor IC

Indexed keywords

BIO-PATCH; BIOSIGNALS; BIOSIGNALS RECORDING; CONDUCTIVE NANOPARTICLES; ELECTROMYOGRAM; FULLY INTEGRATED; IN-VIVO TESTS; INKJET PRINTING TECHNOLOGY; LOW POWER; MEASUREMENT RESULTS; MULTIPLE-CHANNEL; PHOTO PAPERS; PRINTED ELECTRODES; PROGRAMMABLE GAIN; PROTOTYPE IMPLEMENTATIONS; STANDARD CMOS TECHNOLOGY; SYSTEM ON CHIPS; SYSTEM-ON-CHIP; TOTAL POWER CONSUMPTION; WIRED NETWORKS;

APPLICATION SPECIFIC INTEGRATED CIRCUITS; CMOS INTEGRATED CIRCUITS; ELECTROCARDIOGRAPHY; ELECTRODES; PROGRAMMABLE LOGIC CONTROLLERS; SENSORS; TECHNOLOGY;

INK JET PRINTING;

CHIPS; ELECTRIC CIRCUITS; ELECTRODES; INK JET PRINTING; SENSORS;

DEVICES; ELECTROCARDIOGRAPHY; ELECTROMYOGRAPHY; EQUIPMENT DESIGN; HUMAN; MEDICAL INFORMATICS; MICROELECTROMECHANICAL SYSTEM; PHYSIOLOGIC MONITORING; PRINTING; SIGNAL PROCESSING; TELEMEDICINE; ARTICLE; EQUIPMENT;

ELECTROCARDIOGRAPHY; ELECTROMYOGRAPHY; EQUIPMENT DESIGN; HUMANS; MEDICAL INFORMATICS; MICRO-ELECTRICAL-MECHANICAL SYSTEMS; MONITORING, PHYSIOLOGIC; PRINTING; SIGNAL PROCESSING, COMPUTER-ASSISTED; TELEMEDICINE;

EID: 84870923837     PISSN: 10897771     EISSN: None     Source Type: Journal    
DOI: 10.1109/TITB.2012.2204437     Document Type: Article

References (24)

1. M. G. Martini, "Wireless broadband multimedia health services: Current status and emerging concepts," in Proc. IEEE 19th Int. Symp. Pers., Indoor Mobile Radio Commun., Sep. 2008, pp. 1-6.
2. S.Pavlopoulos,E.Kyriacou,A.Berler,S.Dembeyiotis, andD.Koutsouris, "A novel emergency telemedicine system based on wireless communication technology-AMBULANCE," IEEE Trans. Inf. Technol. Biomed., vol. 2, no. 4, pp. 261-267, Dec. 1998.
3. M. Kawamori, M. Fereira Moreno, F. M. Matsubara, and Wei-Yun Yau, "Multimedia applications for standard IPTV: ITU-T IPTV standard suite in action," in Proc. Tech. Symp. ITU Telecom World, 2011, pp. 176-181.
4. S. Guillen, M. T. Arredondo, V. Traver, J. M. Garcia, and C. Fernandez, "Multimedia telehomecare system using standard TV set," IEEE Trans. Biomed. Eng., vol. 49, no. 12, pp. 1431-1437, Dec. 2002.
5. R. Paradiso, G. Loriga, and N. Taccini, "A wearable health care system based on knitted integrated sensors," IEEE Trans. Inf. Technol. Biomed., vol. 9, no. 3, pp. 337-344, Sep. 2005.
6. D. Curone, E. L. Secco, A. Tognetti, G. Loriga, G. Dudnik, M. Risatti, R. Whyte, A. Bonfiglio, and G. Magenes, "Smart garments for emergency operators: The ProeTEX project," IEEE Trans. Inf. Tech. Biomed., vol. 14, no. 3, pp. 694-701, May 2010.
7. S. Coyle, K.-T. Lau, N. Moyna, D. O'Gorman, D. Diamond, F. Di Francesco, D. Costanzo, P. Salvo, M. G. Trivella, D. E. De Rossi, N. Taccini, R. Paradiso, J.-A. Porchet, A. Ridolfi, J. Luprano, C. Chuzel, T. Lanier, F. Revol-Cavalier, S. Schoumacker, V. Mourier, I. Chartier, R. Convert, H. De-Moncuit, and C. Bini, "BIOTEX-biosensing textiles for personalised healthcare management," IEEE Trans. Inf. Technol. Biomed., vol. 14, no. 2, pp. 364-370, Mar. 2010.
8. C. R. Merritt, H. T. Nagle, and E. Grant, "Fabric-based active electrode design and fabrication for health monitoring clothing," IEEE Trans. Inf. Technol. Biomed., vol. 13, no. 2, pp. 274-280, Mar. 2009.
9. T. Degen, S. Torrent, and H. Jackel, "Low-noise two-wired buffer electrodes for bioelectric amplifiers," IEEE Trans. Biomed. Eng., vol. 54, no. 7, pp. 1328-1332, Jul. 2007.
10. A. J. Casson, D. C. Yates, S. J. M. Smith, J. S. Duncan, and E. Rodriguez-Villegas, "Wearable electroencephalography," IEEE Eng. Med. Biol. Mag., vol. 29, no. 3, pp. 44-56, May/Jun. 2010.
11. T. Torfs, A. A. A. Aarts, M. A. Erismis, J. Aslam, R. F. Yazicioglu, K. Seidl, S. Herwik, I. Ulbert, B. Dombovari, R. Fiath, B. P. Kerekes, R. Puers, O. Paul, P. Ruther, C. V. Hoof, and H. P. Neves, "Two-dimensional multi-channel neural probes with electronic depth control," IEEE Trans. Biomed. Circuits Syst., vol. 5, no. 5, pp. 403-412, Oct. 2011.
12. R. F. Yazicioglu, P. Merken, R. Puers, and C. V. Hoof, "A 200 μW eight-channel EEG acquisition ASIC for ambulatory EEG systems," IEEE J. Solid-State Circuits (JSSC), vol. 43, no. 12, pp. 3025-3028, Dec. 2008.
13. X. Zou, X. Xu, L. Yao, and Y. Lian, "A 1-V 450-nW fully integrated programmable biomedical sensor interface chip," IEEE J. Solid-State Circuits, vol. 44, no. 4, pp. 1067-1077, Apr. 2009.
14. G. Yang, J. Chen, F. Jonsson, H. Tenhunen, and L-R. Zheng, "A multiparameter bio-electric ASIC sensor with integrated 2-wire data transmission protocol for wearable healthcare system," in Proc. Design, Autom. Test Eur. Conf. Exhib., Mar. 2012, pp. 443-448.
15. G. Yang, J. Chen, H. Tenhunen, and L-R. Zheng, "An ASIC solution for intelligent electrodes and active-cable used in a wearable ECG monitoring system," in Proc. Int. Conf. Biomed. Electron. Devices, 2009, pp. 209-213.
16. G. Yang, J. Chen, F. Jonsson, H. Tenhunen, and L-R. Zheng, "A 1.0 V 78 μW reconfigurable ASIC embedded in an intelligent electrode for continuous ECG applications," in Proc. IEEE 31st Annu. Int. Conf. Eng. Med. Biol. Soc., Sep. 2009, pp. 2316-2319.
17. J. Chen, L. Rong, F. Jonsson, G. Yang, and L.-R. Zheng, "The design of all-digital polar transmitter based on ADPLL and phase synchronized ΔΣ modulator," IEEE J. Solid-State Circuits, vol. 47, no. 5, pp. 1154-1164, May 2012.
18. M. Mäntysalo, V. Pekkanen, K. Kaija, J. Niittynen, S. Koskinen, E. Halonen, P. Mansikkamäki, and O. Hämeenoja, "Capability of inkjet technology in electronics manufacturing," in Proc. 59th Electron. Com-pon. Technol. Conf., May 2009, pp. 1330-1336.
19. A. Sridhar, T. Blaudeck, and R. R. Baumann, "Inkjet printing as a key enabling technology for printed electronics," Mater. Matters, vol. 6, Article 1, pp. 1-8, 2011.
20. Q. Wan, G. Yang, Q. Chen, and L-R. Zheng, "Electrical performance of inkjet printed flexible cable for ECG monitoring," in Proc. IEEE 20th Electr. Perform. Electron. Packag. Syst., Oct. 2011, pp. 231-234.
21. C. J. D. Luca, "Surface electromyography: Detection and recording," by DelSys Inc., Boston, MA, 2002.
22. V. Pekkanen, M. Mäntysalo, K. Kaija, P. Mansikkamäki, E. Kunnari, K. Laine, J. Niittynen, S. Koskinen, E. Halonen, and U. Caglar, "Utilizing inkjet printing to fabricate electrical interconnections in a System-in-Package," Microelectronic Eng., vol. 87, no. 11, pp. 2382-2390, 2010.
23. Y. M. Chi, T.-P. Jung, and G. Cauwenberghs, "Dry-contact and noncon-tact biopotential electrodes: Methodological review," IEEE Rev. Biomed. Eng., vol. 3, pp. 106-119, 2010.
24. S. M. Lee, K. S. Sim, K. K. Kim, Y. G. Lim, and K. S. Park, "Thin and flexible active electrodes with shield for capacitive electrocardiogram measurement," Med. Biol. Eng. Comput., vol. 48, pp. 447-457, 2010.