Analysis of main optimization techniques in predicting surface roughness in metal cutting processes

Applied Mechanics and Materials

Volumn 217-219, Issue , 2012, Pages 2171-2182

  Rubio, Eva M ^a   Villeta, María ^b   Saá, Adolfo J ^a   Carou, Diego ^a  

^a UNIVERSIDAD NACIONAL DE EDUCACIÓN A DISTANCIA   (Spain)

^b UNIVERSIDAD COMPLUTENSE DE MADRID   (Spain)

Author keywords

Metal cutting processes; Optimization techniques; Process modelling; Surface roughness

Indexed keywords

FUTURE TRENDS; INDUSTRIAL SECTOR; MACHINING PARAMETERS; METAL CUTTING PROCESS; OPTIMIZATION TECHNIQUES; OPTIMIZATION TOOLS; PROCESS MODELLING;

DESIGN; METAL CUTTING; OPTIMIZATION; SURFACE ROUGHNESS;

CUTTING TOOLS;

EID: 84870508922     PISSN: 16609336     EISSN: 16627482     Source Type: Book Series    
DOI: 10.4028/www.scientific.net/AMM.217-219.2171     Document Type: Conference Paper

References (93)

1. th ed. Wiley, New York 2005).
2. DIN4760. Form Deviations; Concepts; Classification System (Deutches Institut Fuer Normung 1982).
3. P.G. Benardos and G.C. Vosniakos: Int. J. Mach. Tool Manu. Vol. 43 (2003), p. 833
4. P.G. Benardos and G.C. Vosniakos: Robot. Cim-Int. Manuf. Vol. 18 (2002), p. 343
5. C. Lu: J. Mater. Process. Tech. Vol. 205 (2008), p. 439
6. K.F. Ehmann and M.S. Hong: CIRP Ann.-Manufact. Techn. Vol. 43 (1994), p. 483
7. W. Grzesik: Wear Vol. 194 (1996), p. 143
8. S.C. Lin and M.F. Chang: Int. J. Mach. Tool Manu. Vol. 38 (1998), p. 763
9. C-CA. Chen, W.C. Liu and N.A. Duffie: Int. J. Mach. Tool Manufact. Vol.38 (1998), p. 543
10. P. Muñoz-Escalona and Z. Cassier: Wear Vol. 218 (1998), p. 103
11. K.Y. Lee, M.C. Kang, Y.H. Jeong, et al.: J. Mater. Process. Tech. Vol. 113 (2001), p. 410
12. D.Y. Jang, Y.G. Choi, H.G. Kim, et al.: Int. J. Mach. Tool Manufact. Vol. 36 (1996), p. 453
13. C. Beggan, M. Woulfe, P. Young, et al.: Int. J. Adv. Manuf. Tech. Vol. 15 (1999), p. 737
14. S.A. Coker and Y.C. Shin: Int. J. Mach. Tool Manufact. Vol. 36 (1996), p. 411
15. I. Mukherjee and P.K. Ray: Comput. Ind. Eng. Vol. 50 (2006), p. 15
16. O.B. Abouelatta and J. Madl: J. Mater. Process. Tech. Vol. 118 (2001), p. 269
17. C.X.J. Feng and X. Wang: Int. J. Adv. Manuf. Tech. Vol. 20 (2002), p. 348
18. A.K. Ghani and I.A. Choudhury: J. Mater. Process. Tech. Vol. 127 (2002), p. 17
19. K.L. Petri, R.E. Billo and B. Bidanda: J. Manuf. Sci. Vol. 17 (1998), p. 52
20. F. Cus and U. Zuperl: J. Mater. Process. Tech. Vol. 173 (2006), p. 281
21. T. Matsumura, H. Sekiguchi and E. Usui: J. Mater. Process. Tech. Vol. 62 (1996), p. 440
22. S. Varghese and V. Radhakrishnan: J. Mater. Process. Tech. Vol. 44 (1994), p. 353
23. R. Azouzi and M. Guillot: Int. J. Mach. Tool Manufact. Vol. 37 (1997), p. 1201
24. Y.H. Tsai, J.C. Chen and S.J. Lou: Int. J. Mach. Tool Manufact. Vol. 39 (1999), p. 583
25. W.S. Lin, B.Y. Lee and C.L. Wu.: J. Mater. Process. Tech. Vol. 108 (2001), p. 286
26. S.G. Wang and Y.L. Hsu. in: One-pass milling machining parameter optimization to achieve mirror surface roughness, volume 193 of Proceedings of the Institution of Mechanical Engineers, chapter, 1, Part B: Journal of Engineering Manufacture (2005).
27. J.P. Davim, V.N. Gaitonde and S.R. Karnik: J. Mater. Process. Tech. Vol. 205 (2008), p. 16
28. D. Karayel: J. Mater. Process. Tech. Vol. 209 (2009), p. 3125
29. A.M. Zain, H. Haron and S. Sharif: Expert Syst. Appl. Vol. 37 (2010), p. 1755
30. I. Asiltürk and M. Çunkaş: Expert Syst. Appl. Vol. 38 (2011), p. 5826
31. X.P. Li, K. Iynkaran and A.Y.C. Nee: J. Mater. Process. Tech. Vol. 89-90 (1999), p. 224
32. W. Grzesik and S. Brol: J. Mater. Process. Tech. Vol. 134 (2003) p.265
33. M. Correa, C. Bielza and J. Pamies-Teixeira: Expert Syst. Appl. Vol. 36 (2009), p. 7270
34. H.J. Zimmerman: Int. J. Gen. Syst. Vol. 2 (1976), p. 209
35. Kwon. and G.W. Fisher: J. Manuf. Syst. Vol. 21(6) (2002), p.440
36. S.J. Lou and J.C. Chen: Comput. Ind. Eng. Vol.33 (1997), p. 401
37. J.C. Chen and M. Savage: Int. J. Adv. Manuf. Tech. Vol. 17 (2001), p. 670.
38. Y.T. Chen and S.R.T. Kumara: Int. J. Prod. Res. Vol. 36 (1998), p. 395
39. R. Javadpour and G.M. Knapp: Comput. Ind. Eng. Vol. 45 (2003), p. 323
40. Y. Jiao, S. Lei, Z.J. Pei, et al.: Int. J. Mach. Tool Manufact. Vol. 44 (2004), p. 1643
41. E.D. Kirby, J.C. Chen and J.Z. Zhang: Expert Syst. Appl. Vol. 30 (2006), p. 592
42. N.R. Abburi and U.S. Dixit: Robot. Cim-Int. Manuf. Vol. 22 (2006), p. 363
43. R.Y. Kuo and P.H. Cohen: Fuzzy Set. Syst. Vol. 98 (1998), p. 15
44. S-Y. Ho, K-C. Lee, S-S. Chen, et al.: Int. J. Mach. Tool Manufact. Vol. 42 (2002), p. 1441
45. E.D. Kirby and J.C. Chen: Comput. Ind. Eng. Vol. 53 (2007), p.30
46. M. Dong and N. Wang: Appl. Math. Model. Vol. 35 (2011), p. 1024
47. J. Kopac, M. Bahor and M. Sokovic: Int. J. Mach. Tool Manufact. Vol. 42 (2002), p. 707
48. M. Thomas and Y. Beuchamp: Int. J. Mach. Tool Manu. Vol. 43 (2003), p. 1093
49. A.H. El-Sinawi and R. Kashani: J. Mater. Process. Tech. Vol. 167 (2005), p. 54
50. G.A. Hassan and S.M.A. Suliman: Int. J. Prod. Res. Vol. 28 (1990), p. 1057
51. G. Taguchi: System of experimental design, vol 2 (American Supplier Institute, New York 1987).
52. W.H. Yang and Y.S. Tarng: J. Mater. Process. Tech. Vol.84 (1998), p. 122
53. J.P. Davim: J. Mater. Process. Tech. Vol. 116 (2001), p.305
54. A. Manna and B. Bhattacharyya: Int. J. Adv. Manuf. Tech. Vol. 23 (2004), p. 658
55. Y. Tzeng and M. Jean: Robot. Cim-Int. Manuf. Vol. 21 (2005), p. 506
56. M. Nalbant, H. Gökkaya and G. Sur: Mater. Design Vol. 28 (2007), p.1379.
57. I. Asiltürk and H. Akkuş: Measurment Vol. 44 (2011), p. 1697
58. A. Gupta, H. Singh and A. Aggarwal: Expert Syst. Appl. Vol. 38 (2011), p. 6822
59. M. Villeta, E.M. Rubio, J.M. Sáenz de Pipaón, et al., in: Mater. Manuf. Process. Vol. 26 (2011), p. 1503.
60. M.Y. Noordin, V.C. Venkatesh, S. Sharif, et al.: J. Mater. Process. Tech. Vol. 145 (2004), p. 46
61. W.M. Carlyle, D.C. Montgomery and G.C. Runger: J. Qual. Technol. Vol. 32 (2000), p. 1
62. G. Steenackers, F. Presezniak and P. Guillaume: Comput. Ind. Eng. Vol. 57 (2009), p. 847
63. K. Taramen: Int. J. Prod. Res. Vol. 12 (1974), p. 233
64. M. Alauddin, M.A. El-Baradie and M.S.J. Hashmi: J. Mater. Process. Tech. Vol. 55 (1995), p. 123
65. A. Mansour and H. Abdalla: J. Mater. Process. Tech. Vol.124 (2002), p. 183
66. M.J. Davidson, K. Balasubramanian and G.R.N. Tagore: J. Mater. Process. Tech. Vol. 202 (2008), p. 41
67. Y. Sahin and A.R. Motorcu: Int. J. Refract. Met. H. Vol. 26 (2008), p. 84
68. D.I. Lalwani, N.K. Mehta and P.K. Jain: J. Mater. Process. Tech. Vol. 206 (2008), p. 167
69. P. Sahoo, T. K. Barman and B.C. Routara: Int. J. Manu. Res. Vol. 3 (2008), p. 360
70. J.S. Dureja, V.K. Gupta, V.S. Sharma, et al. in: Design optimization of cutting conditions and analysis of their effect on tool wear and surface roughness during hard turning of AISI-H11 steel with a coated-mixed ceramic tool, volume 223 of Proceedings of the Institution of Mechanical Engineers, chapter 11, Part B: Journal of Engineering Manufacture (2009).
71. K. Bouacha, M.A. Yallese, T. Mabrouki, et al.: Int. J. Refract. Met. H. Vol. 8 (2010), p. 349
72. S. Neşeli, S. Yalidz and E. Türkeş: Measurement Vol. 44 (2011), p. 580
73. K. Fuh and C.F. Wu: Int. J. Mach. Tool Manufact. Vol. 35 (1995), p. 1187
74. C. Ezilarasan, V.S. Senthil, A. Velayudham, et al.: Trans. Nonferrous Met. Soc. China Vol. 21 (2011), p. 1986
75. F. Glover: Interfaces Vol. 20 (1990), p. 74
76. J.H. Holland: Adaptation in natural and artificial systems: An introductory analysis with applications to biology, control, and artificial intelligence (MIT Press, Massachusetts 1992).
77. F. Cus and J. Balic: Robot. Cim-Int. Manuf. Vol. 19 (2003), p. 113
78. W.T. Chien and C.Y. Chou: J. Mater. Process. Tech. Vol. 118 (2001), p. 442
79. P.V.S. Suresh, P. Venkateswara Rao and S.G. Deshmukh: Int. J. Mach. Tool Manufact. Vol. 42 (2002), p. 675
80. A.J. Vallejo and R. Morales-Menendez R. in: Cost-effective supervisory control system in peripheral milling using HSM, Annual Reviews in Control, doi:10.1016/j.arcontrol.2009.05.008 (2009)
81. A.K. Nandi and D.K. Pratihar: J. Mater. Process. Tech. Vol. 155-156 (2004), p. 1150
82. I.N. Tansel, B. Ozcelik, W.Y. Bao, et al.: Int. J. Mach. Tool Manufact. Vol. 46 (2006), p. 26
83. W-H. Ho, J-T. Tsai, B-T. Lin, et al.: Expert Syst. Appl. Vol. 36 (2009), p.3216
84. A.M. Zain, H. Haron and S. Sharif: Expert Syst. Appl. Vol. 37 (2010), p. 4650
85. I.N. Tansel, S. Gülmez, M. Demetgul, et al.: Expert Syst. Appl. Vol. 38 (2011), p. 4780
86. K. Kirkpatrick, C.D. Gelett and M.P. Vecchi: Sciences Vol. 220 (1983), p. 671
87. Z. Khan, B. Prasad and T. Singh: Comput. Oper. Res. Vol. 24(7) (1997), p. 647
88. R. Saravanan, P. Ashokan and M. Sachithanandam: Int. J. Adv. Manuf. Tech. Vol. 17 (2001), p. 471
89. M.C. Chen and D.M. Tsai: Int. J. Prod. Res. Vol. 34 (1996), p. 2803
90. M.C. Chen and C.T. Su: Internacional J. Prod. Res. Vol. 36 (1998), p. 2115
91. M. Hagiwara, S. Chen and I.S. Jawahir: J. Mater. Process. Tech. Vol. 209 (2009), p.332
92. F. Kolahan and M. Liang: Comput. Ind. Eng. Vol.31 (1996) p. 371
93. I. Mukherjee and P.K. Ray: Appl. Soft Comput. Vol. 8: (2008), p. 402