Design optimization of cutting conditions and analysis of their effect on tool wear and surface roughness during hard turning of AISI-H11 steel with a coated-mixed ceramic tool

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 223, Issue 11, 2009, Pages 1441-1453

  Dureja, J S ^a   Gupta, V K ^a   Sharma, V S ^b   Dogra, M ^c  

^a PUNJABI UNIVERSITY   (India)

^b DR B R AMBEDKAR NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^c PANJAB UNIVERSITY   (India)

Author keywords

Coated mixed ceramic tool; Flank wear; Surface roughness

Indexed keywords

ADHESION WEAR; BEST FIT; COATED-MIXED CERAMIC TOOL; CUTTING SPEED; DEPTH OF CUT; DESIGN OPTIMIZATION; DESIRABILITY FUNCTION APPROACH; DEVELOPED MODEL; EXPERIMENTAL DATA; FEED-RATES; FLANK WEAR; H11 STEELS; HARD PARTICLES; HARD TURNING; INTERACTION GRAPHS; MACHINING PARAMETERS; MIXED CERAMIC; MIXED CERAMIC TOOLS; MULTIPLE RESPONSE; NON-LINEAR; NOTCH WEAR; RESPONSE FACTOR; RESPONSE SURFACE METHODOLOGY; SCANNING ELECTRONS; SEM-EDX; SIGNIFICANT FACTORS; SIGNIFICANT IMPACTS; TOOL SURFACES; TOOL WEAR; WEAR CHARACTERIZATION; WORK MATERIAL; WORK PIECES;

CERAMIC MATERIALS; CERAMIC TOOLS; HARDNESS; METAL ANALYSIS; OPTIMIZATION; REGRESSION ANALYSIS; SURFACE PROPERTIES; SURFACE ROUGHNESS; TITANIUM NITRIDE; TOOL STEEL; TURNING; WEAR OF MATERIALS;

ANALYSIS OF VARIANCE (ANOVA);

EID: 70350468695     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544054JEM1498     Document Type: Article

References (30)

1. Aslan, E., Camuscu, N., and Birgoren, B. Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Al2O3/TiC mixed ceramic tool. J. Mater. Des., 2007, 28, 1618-1622.
2. Baldoni, J. G. and Buljan, S. T. Ceramics for machining. Am. Ceram. Soc. Bull., 1988, 67, 381-386.
3. Li, X. S. Ceramic cutting tools: an introduction. Key Engng Mater., 1994, 96, 1-18.
4. Jianxin, D. and Xing, A. Wear resistance of Al2O3/TiB2 ceramic cutting tools in sliding wear tests and in machining processes. J. Mater. Process. Technol., 1997, 72, 249-255.
5. Lalwani, D. I., Mehta, N. K., and Jain, P. K. Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel. J. Mater. Process. Technol., 2008, 206, 167-179.
6. Singh, D. and Rao, P. V. A surface roughness prediction model for hard turning process. Int. J. Adv. Mf. Technol., 2007, 32, 1115-1124.
7. Grzesik, W. and Wanat, T. Hard turning of quenched alloy steel parts using conventional and wiper ceramic inserts. Int. J. Mach. Tools Mf., 2006, 46, 1988-1995.
8. Benga, G. C. and Abrao, A. M. Turning of hardened 100Cr6 bearing steel with ceramic and PCBN cutting tools. J. Mater. Process. Technol., 2003, 143-144, 237-241.
9. Darwish, S. M. The impact of the tool material and the cutting parameters on surface roughness of supermet 718 nickel super alloy. J. Mater. Process. Technol., 2000, 97, 10-18.
10. Horng, J.-T., Liu, N.-M., and Chiang, K.-T. Investigating the machinability of Hadfield steel in hard turning with Al2O3/TiC mixed ceramic tool based on response surface methodology. J. Mater. Process. Technol., 2008, 208, 532-541.
11. Ozel, T., Karpat, Y., Figueira, L., and Paulo, D. J. Modeling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts. J. Mater. Process. Technol., 2007, 189, 192-198.
12. Ozel, T. and Karpat, Y. Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. Int. J. Mach. Tools Mf., 2005, 45, 467-479.
13. Kishawy, H. A. and Elbestawi, M. A. Effects of process parameters on material side flow during hard turning. Int. J. Mach. Tools Mf., 1999, 39, 1017-1030.
14. Huang, Y. and Liang, S. Y. Force modeling in shallow cuts with larger negative rake angle and large nose radius tools - applications to hard turning. Int. J. Adv. Mf. Technol., 2003, 22, 626-632.
15. Thiele, J. D. and Melkote, S. N. Effect of cutting edge geometry and work piece hardness on surface generation in the finish hard turning of AISI 52100 steel. J. Mater. Process. Technol., 1999, 94, 216-226.
16. Chou, Y. K. and Song, H. Tool nose radius effects on finish hard turning. J. Mater. Process. Technol., 2004, 148, 259-268.
17. Chen, L., El-Wardany, T. I.,Nasr,M., and Elbestawi,M. A. Effects of edge preparation and feed when hard turning a hot work die steel with polycrystalline cubic boron nitride tools. CIRP Ann.Mf. Technol., 2006, 55(1), 89-92.
18. Zhou, J. M., Walter, H., Andersson, M., and Stahl, J. E. Effect of chamfer angle on wear of PCBN cutting tool. Int. J. Mach. Tools Mf., 2003, 43, 301-305.
19. Endres, W. J. and Kountanya, R. K. The effects of corner radius and edge radius on tool flank wear. J. Mf. Process. Technol., 2002, 4, 89-96.
20. Kansal, H. K., Singh, S., and Kumar, P. Parametric optimization of powder mixed electrical discharge machining by response surface methodology. J. Mater. Process. Technol., 2005, 169, 427-436.
21. Oktem, H., Erzurmlu, T., and Kurtaran, H. Application of response surface methodology in the optimization of cutting conditions for surface roughness. J. Mater. Process. Technol., 2005, 170, 11-16.
22. Box, G. E. P. and Behnken, D. W. Some new three level designs for the study of quantitative variables. Technometrics, 1960, 2, 455-475.
23. Box, G. E. P., Hunter, W. G., and Hunter, J. S. Statistics for experimenters: an introduction to design, data analysis, and model building, 1976 ( John Wiley & Sons, New York).
24. Myers, R. H. and Montgomery, D. C. Response surface methodology: process and product optimization using designed experiments, 1995 ( John Wiley & Sons, New York).
25. Sandvik Coromant, Main Catalogue 2008, available at: http://www2. coromant.sandvik.com/coromant/ downloads/catalogue/ENG/CoroKey-2008.pdf.
26. Fnides, B., Yallese, M. A., and Aouici, H. Hard turning of hot work steel AISI H11: evolution of cutting pressures, resulting force and temperature. In Proceedings of MECHANIKA 2008, Kaunas, Lithuania, 3-4 April, 2008, vol.4, pp. 59-63.
27. Narutaki, N. and Yamane, Y. Tool wear and cutting temperature of CBN tools in machining of hardened steels. Ann. CIRP, 1979, 28(1), 23-28.
28. Brandt, G. and Mikus, M. The formation of protective layers when machining steel with ceramic cutting tools. Wear, 1987, 118, 99-112.
29. Gosh, G. K. L., Lin, L. C., Rahman, M., and Lim, S. C. Transition in wear mechanisms of alumina cutting tools. Wear, 1996, 201, 199-208.
30. Barry, J. and Bryne, G. Cutting tool wear in the machining of hardened steels. Part I. Alumina/TiC cutting tool wear. Wear, 2001, 247(2), 139-151.