Dimensional measurement of micro-moulded parts by computed tomography

Measurement Science and Technology

Volumn 23, Issue 12, 2012, Pages

  Ontiveros, S ^a   Yague Fabra J A ^a   Jimenez R ^a   Tosello, G ^b   Gasparin, S ^b   Pierobon, A ^c   Carmignato, S ^c   Hansen, H N ^b  

^a UNIVERSITY OF ZARAGOZA   (Spain)

^b TECHNICAL UNIVERSITY OF DENMARK   (Denmark)

^c UNIVERSITY OF PADOVA   (Italy)

Author keywords

computed tomography; micro moulding; uncertainty

Indexed keywords

INJECTION MOLDING; NONDESTRUCTIVE EXAMINATION; QUALITY CONTROL; TOMOGRAPHY; UNITS OF MEASUREMENT;

DIMENSIONAL MEASUREMENTS; DIMENSIONAL METROLOGY; DIMENSIONAL VERIFICATION; INDUSTRIAL PRODUCTION; MEASURING TECHNOLOGY; NON-DESTRUCTIVE TEST; STRATEGIC ADVANTAGES; UNCERTAINTY;

COMPUTERIZED TOMOGRAPHY;

EID: 84870345673     PISSN: 09570233     EISSN: 13616501     Source Type: Journal    
DOI: 10.1088/0957-0233/23/12/125401     Document Type: Article

References (31)

1. Brand U and Kirchhoff J 2005 A micro-CMM with metrology frame for low uncertainty measurements Meas. Sci. Technol. 16 2489-97 (Pubitemid 41661237)
2. Tosello G, Hansen H N and Gasparin S 2009 Applications of dimensional micro metrology to the product and process quality control in manufacturing of precision polymer micro components CIRP Ann. 58 467-72
3. Marinello F, Savio E, Bariani P and Carmignato S 2009 Coordinate metrology using scanning probe microscopes Meas. Sci. Technol. 20 084002
4. Bartscher M, Hilpert U, Goebbels J and Weidemann G 2007 Enhancement and proof of accuracy of industrial computed tomography (CT) measurements CIRP Ann. 56 495-8 (Pubitemid 46901067)
5. Kruth J P, Bartscher M, Carmignato S, Schmitt R, De Chiffre L and Weckenmann A 2011 Computed tomography for dimensional metrology CIRP Ann. 60 821-42
6. Carmignato S, Dreossi D, Mancini L, Marinello F, Tromba G and Savio E 2009 Testing of x-ray microtomography systems using a traceable geometrical standard Meas. Sci. Technol. 20 084021
7. Neuschaefer-Rube U, Bartscher M, Neukamm M, Neugebauer M, Härtig F, Goebbels J, Ehrig K and Staude A 2011 Measurement of micro gears - comparison of optical, tactile-optical and CT-measurements Proc. SPIE 7864 78640H
8. Carmignato S, Pierobon A and Savio E 2011 First international intercomparison of computed tomography systems for dimensional metrology Proc. 11th Euspen Int. Conf. (Como) pp 84-7
9. Bartscher M, Neukamm M, Hilpert U, Neuschaefer-Rube U, Härtig F, Kniel K, Ehrig K, Staude A and Goebbels J 2010 Achieving traceability of industrial computed tomography Key Eng. Mater. 437 79-83
10. Welkenhuyzen F, Kiekens K, Pierlet M, Dewulf W, Bleys P, Kruth J P and Voet A 2009 Industrial computer tomography for dimensional metrology: overview of influence factors and improvement strategies Optimess: Proc. 4th Int. Conf. on Optical Measurement Techniques for Structures and Systems (Antwerp) pp 401-10
11. Carmignato S, Voltan A and Savio E 2010 Metrological performance of optical coordinate measuring machines under industrial conditions CIRP Ann. 59 497-500
12. Carmignato S and Savio E 2011 Traceable volume measurements using coordinate measuring systems CIRP Ann. 60 519-22
13. Carmignato S 2012 Accuracy of industrial computed tomography measurements: experimental results from an international comparison CIRP Ann. 61 491-4
14. ISO 2008 Evaluation of Measurement Data - Guide to the Expression of Uncertainty in Measurement JCGM 100
15. Weckenmann A and Krämer P 2009 Assessment of measurement uncertainty caused in the preparation of measurements using computed tomography Proc. IMEKO 19th World Congress (Lisbon) pp 1888-92
16. Weckenmann A and Krämer P 2009 Predetermination of measurement uncertainty in the application of computed tomography Proc. 11th CIRP Int. Conf. on Computer Aided Tolerancing CAT (Annecy) pp 317-30
17. ISO JCGM 101 2008 Evaluation of Measurement Data-Supplement 1 to the 'Guide to the Expression of Uncertainty in Measurement' - Propagation of distributions using a Monte Carlo method GUM, Suppl. 1
18. Jaenisch G, Bellon C and Ewert U 2008 aRTist - analytical RT inspection simulation tool for industrial application Proc. 17th World Conf. on Nondestructive Testing (Shanghai,) pp 511-6
19. Zou J, Hu Z L, Gui J B, Rong J Y, Li Y M and Zheng H R 2010 Geant4-based Monte Carlo simulator for fan-and cone-beam x-ray CT iCBBE: Proc. 4th Int. Conf. on Bioinformatics and Biomedical Engineering (Chengdu,) pp 1-4
20. Schmitt R and Niggemann C 2010 Uncertainty in measurement for x-ray-computed tomography using calibrated work pieces Meas. Sci. Technol. 21 054008
21. Müller P, Pǎcurar R A, De Chiffre L, Cantatore A and Berce P 2011 Geometrical metrology on silicone rubber by computed tomography Proc. 11th Euspen Int. Conf. (Como,) pp 243-6
22. ISO 2011 Geometrical product specifications (GPS) - coordinate measuring machines (CMM): technique for determining the uncertainty of measurement - part 3: use of calibrated workpieces or measurement standards ISO 15530-3
23. VDI/VDE 2010 Computed tomography in dimensional measurement-influencing variables on measurement results and recommendations for computed tomography dimensional measurements VDI/VDE 2630-1.2
24. Kumar J, Attridge A, Wood P K C and Williams M 2011 Analysis of the effect of cone-beam geometry and test object configuration on the measurement accuracy of a computed tomography scanner used for dimensional measurement Meas. Sci. Technol. 22 035105
25. Cantatore A, Andreasen J L, Carmignato S, Müller P and De Chiffre L 2011 Verification of a CT scanner using a miniature step gauge Proc. 11th Euspen Int. Conf. (Como,) pp 46-9
26. Kiekens K, Welkenhuyzen F, Tan Y, Bleys P, Voet A, Kruth J P and Dewulf W 2011 A test object for with parallel grooves for calibration and accuracy assessment of industrial computed tomography (CT) metrology Meas. Sci. Technol. 22 115502
27. Reinhart C 2008 Industrial Computer Tomography: a universal inspection tool Proc. 17th World Conf. on Nondestructive Testing (Shanghai,) pp 1561-70
28. Kasperl S and Hiller J 2009 Artefact correction in coordinate measuring with industrial x-ray computed tomography Tech. Mess. 79 401-9
29. Reisinger S, Kasperl S, Franz M, Hiller J and Schmid U 2011 Simulation-based planning of optimal conditions for industrial computed tomography Proc. Int. Symp. on Digital Industrial Radiology and Computed Tomography (Berlin,)
30. Knapp W 2001 Tolerance and uncertainty Proc. 5th Int. Conf. on Laser Metrology, Machine Tool, CMM and Robot Performance LAMDAMAP (Southampton,) pp 357-66
31. International Organization for Standardization (ISO) 1998 Geometrical product specifications (GPS) - inspection by measurement of workpieces and measuring equipment - part 1: decision rules for proving conformance or non-conformance with specifications ISO 14253-1