Instrumented end notched flexure - Crack propagation and process zone monitoring Part II: Data reduction and experimental

International Journal of Solids and Structures

Volumn 50, Issue 2, 2013, Pages 310-319

  Budzik, M K ^a,b,c,d   Jumel, J ^a,b,c   Ben Salem, N ^a,b,c,d   Shanahan, M E R ^a,b,c  

^a UNIVERSITÉ DE BORDEAUX   (France)

^b CNRS   (France)

^c ARTS ET MÉTIERS PARISTECH   (France)

^d CNES   (France)

Author keywords

End notched flexure; Mode I; Mode II; Process zone; Strain gauges

Indexed keywords

ADHESION TEST; APPLIED LOADS; COHESIVE ZONES; CRACK FRONTS; END NOTCHED FLEXURES; EPOXY ADHESIVES; LOAD TRANSFER MECHANISM; LOCAL SURFACES; MODE II; MONITORING TECHNIQUES; NEW RESULTS; OUTER SURFACE; PROCESS ZONE; R-CURVES; STANDARD MODEL; THREE POINT BENDING;

ADHESIVE JOINTS; DATA REDUCTION; STRAIN GAGES;

CRACK PROPAGATION;

EID: 84869489017     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2012.08.030     Document Type: Article

References (46)

1. G. Alfano On the influence of the shape of the interface law on the application of cohesive-zone models Comput. Sci. Technol. 66 2006 723 730 (Pubitemid 43329418)
2. K.S. Alfredsson On the instantaneous energy release rate of the end-notch flexure adhesive joint specimen Int. J. Solids Struct. 41 16-17 2004 4787 4807 (Pubitemid 38814642)
3. M.D. Banea, and L.F.M. da Silva Adhesively bonded joints in composite materials: an overview Proc. Inst. Mech. Engrs. Part L: J. Mater. Des. Appl. 223 2009 1 18
4. J.D. Barrett, and R.O. Foschi Mode II stress-intensity factors for cracked wood beams Eng. Fract. Mech. 9 2 1977 371 378
5. S. Bennati, M. Colleluori, D. Corigliano, and P.S. Valvo An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates Comput. Sci. Technol. 69 2009 1735 1745
6. IIc, of structural adhesive joints: an effective crack length approach Eng. Fract. Mech. 72 2005 877 897 (Pubitemid 40046799)
7. M.K. Budzik, J. Jumel, and M.E.R. Shanahan An in situ technique for the assessment of adhesive properties of a joint under load Int. J. Fract. 171 2 2011 111 124
8. M.K. Budzik, J. Jumel, and M.E.R. Shanahan Process zone in the single cantilever beam under transverse loading - Part II: Experimental Theor. Appl. Fract. Mech. 56 1 2011 13 21
9. M.K. Budzik, J. Jumel, and M.E.R. Shanahan Effect of adhesive compliance in the assessment of soft adhesives with the wedge test J. Adhes. Sci. Technol. 25 1-3 2011 131 149
10. L.A. Carlsson, J.W. Gillespie Jr.; and R.B. Pipes On the analysis and design of end notched flexure (ENF) for mode II testing J. Compos. Mater. 20 1986 594 604 (Pubitemid 17497192)
11. H. Chai, and S. Mall Design aspects of the end-notch adhesive joint specimen Int. J. Fract. 36 1 1988 R3 R8
12. C.R. Corleto, and H.A. Hogan Energy release rates for the ENF specimen using a beam on an elastic foundation J. Compos. Mater. 29 11 1995 1420 1436
13. B.D. Davidson, and X. Sun Geometry and data reduction recommendations for a standardized end notched flexure test for unidirectional composites J. ASTM Int. 3 9 2006 1 19
14. B.V. Derjaguin, V.M. Muller, and Y.P. Toporov Effect of contact deformations on adhesion of particles J. Colloid Interf. Sci. 53 2 1975 314 326
15. D2919-01, 2007. Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading.
16. D3165-07 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies.
17. D3166-99, 2005. Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal).
18. D3433-99, 2005. Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints.
19. D3762-03 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminium (Wedge Test).
20. M.F.S.F. de Moura, R.D.S.G. Campilho, and J.P.M. Gonçalves Pure mode II fracture characterization of composite bonded joints Int. J. Solids Struct. 46 6 2009 1589 1595
21. F. Erdogan Stress distribution in bonded dissimilar materials with cracks J. Appl. Mech. 32 1965 403 410
22. M. Goland, and E. Reissner The stresses in cemented joints J. Appl. Mech. Trans. ASME 11 1944 A17 A27
23. M.Y. He, and J.W. Hutchinson Crack deflection at an interface between dissimilar elastic materials Int. J. Solids Struct. 25 1989 1053 1067
24. J. Jumel, M.K. Budzik, and M.E.R. Shanahan Process zone in the single cantilever beam under transverse loading - Part I: Theoretical analysis Theor. Appl. Fract. Mech. 56 1 2011 7 12
25. Jumel, J.; Budzik, M.K.; Ben Salem, N.; Shanahan, M.E.R.; 2012. Part I of Present Contribution.
26. K. Kageyama, M. Kikuchi, and N. Yanagisawa Stabilized end notched flexure test. Characterization of mode II interlaminar crack growth ASTM STP 1110 1992 210 225 (Pubitemid 21705315)
27. K. Kendall Crack propagation in lap shear joints J. Phys. D Appl. Phys. 8 5 1975 512 522
28. Kuczmaszewski, J.; 2006. Fundamentals of Metal-Metal Adhesive Joint Design. Lublin University of Technology, Polish Academy of Sciences, Lublin Branch, Lublin.
29. K. Leffler, K.S. Alfredsson, and U. Stigh Shear behaviour of adhesive layers Int. J. Struct. Solids 44 2007 530 545 (Pubitemid 44737498)
30. D. Leguillon Strength or toughness? A criterion for crack onset at a notch Eur. J. Mech. A/Solids 21 1 2002 61 72 (Pubitemid 34237283)
31. Mall, S.; Kochar, N.K.; 1986. Finite Element Analysis of End Notch Flexure Specimen. NASA Contractor Report 178113.
32. R.H. Martin, and B.D. Davidson Mode II fracture toughness evaluation using a four point bend end notched flexure test Plast. Rubbers Compos. 28 8 1999 401 406 (Pubitemid 30544565)
33. S. Mostovoy, P.B. Crosley, and E.J. Ripling Use of crack-line-loaded specimens for measuring plane-strain fracture toughness J. Mater. 2 1967 661 668
34. L. Nicu, and C.J. Bergaud Experimental and theoretical investigations on nonlinear resonances of composite buckled microbridges J. Appl. Phys. 86 1999 5835
35. Z. Ouyang, and Q. Li Nonlinear interface shear fracture of end notched flexure specimens Int. J. Solids Struct. 46 13 2009 2659 2668
36. Russell, A.J.; 1982. Factors affecting the interlaminar fracture energy of graphite/tpoxy laminates. In: Progress in Science and Engineering of Composites; Proceedings of ICCM-IV, Tokyo, pp. 279-286.
37. E. Reissner On the theory of bending of elastic plates J. Math. Phys. 23 1944 184 191
38. B.F. Sorensen, and T.K. Jacobsen Determination of cohesive laws by the J integral approach Eng. Fract. Mech. 70 14 2003 1841 1858 (Pubitemid 36832691)
39. M.Y. Tsai, and J. Morton An evaluation of analytical and numerical solutions to the single-lap joint Int. J. Solids Struct. 31 18 1994 2537 2563
40. H. Wang, and T. Vu-Khanh Use of end-loaded-split (ELS) test to study stable fracture behaviour of composites under mode II loading Comput. Struct. 36 1-2 1996 71 79 (Pubitemid 126376916)
41. Y. Wang, and J.G. Williams Corrections for mode II fracture toughness specimens of composite materials Compos. Sci. Technol. 43 3 1992 251 256
42. WK22949 New Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites Using the End-Notched Flexure (ENF) Test.
43. H. Yoshihara Resistance curve for the mode II fracture toughness of wood obtained by the end-notched flexure test under the constant loading point displacement condition J. Wood. Sci. 49 3 2003 210 215 (Pubitemid 37292708)
44. H. Yoshihara Mode II R-curve of wood measured by 4-ENF test Eng. Fract. Mech. 71 13-14 2004 2065 2077 (Pubitemid 38459647)
45. H. Yoshihara Mode II initiation fracture toughness analysis for wood obtained by 3-ENF test Comput. Sci. Technol. 65 14 2005 2198 2207 (Pubitemid 41364033)
46. Z.H. Zhang, J.K. Shang, and F.V. Lawrence A backface strain technique for detecting fatigue crack initiation in adhesive joints J. Adhesion 49 1995 23 36