Adhesively bonded joints in composite materials: An overview

Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications

Volumn 223, Issue 1, 2009, Pages 1-18

  Banea, M D ^a   Da Silva, L F M ^b  

^a Instituto Superior Tecnico Institute for Mechanical Engineering   (Portugal)

^b UNIVERSITY OF PORTO   (Portugal)

Author keywords

Adhesively bonded joints; Analytical methods; Fibre reinforced plastic composite materials; Finite element modelling; Sandwich panels

Indexed keywords

ADHESIVELY BONDED JOINTS; ANALYTICAL METHODS; FIBRE-REINFORCED PLASTIC COMPOSITE MATERIALS; FINITE-ELEMENT MODELLING; SANDWICH PANELS;

ADHESIVE JOINTS; COMPOSITE MICROMECHANICS; FIBER REINFORCED PLASTICS; HONEYCOMB STRUCTURES; NUMERICAL METHODS; POLYESTERS; QUALITY ASSURANCE; REINFORCED PLASTICS; SANDWICH STRUCTURES; STRESS ANALYSIS; STRUCTURAL DESIGN; STRUCTURE (COMPOSITION);

FAILURE ANALYSIS;

EID: 67649742908     PISSN: 14644207     EISSN: None     Source Type: Journal    
DOI: 10.1243/14644207JMDA219     Document Type: Review

References (129)

1. Matthews,F.L.,Kilty,P.P. F.,and Godwin,E.W.Areview of the strength of joints in fiber-reinforced plastics 2: adhesively bonded joints. Composites, 1982, 13(1), 29-37.
2. Baldan, A. Adhesively-bonded joints and repairs in metallic alloys, polymers and composite materials: adhesives, adhesion theories and surface pretreatment. J. Mater. Sci., 2004, 39(1), 1-49.
3. Davis, M. J. and Bond, D. Principles and practise of adhesive bonded structural joints and repairs. Int. J. Adhesion Adhes., 1999, 19(3), 91-105.
4. Kinloch, A. J. Adhesion and adhesives, 1987 (Chapman and Hall, London).
5. Molitor, P., Barron,V., and Young,T. Surface treatment of titanium for adhesive bonding to polymer composites: a review. Int. J. Adhesion Adhes., 2001, 21(2), 129-136.
6. Adams,R.D. andWake,W. C. Structural adhesive joints in engineering, 1984, vol. 15 (Elsevier, New York).
7. Chamis, C. C. and Murthy, P. L. N. Simplified procedures for designing adhesively bonded composite joints. J. Reinf. Plast. Compos., 1991, 10(1), 29-41.
8. Tong, L. An assessment of failure criteria to predict the strength of adhesively bonded composite double lap joints. J. Reinf. Plast. Compos., 1997, 16(8), 698-713.
9. Kim, J.-S., Kim C. G., and Hong C. S. Practical design of tapered composite structures using the manufacturing cost concept. aCompos. Struct., 2001, 51(3), 285-299.
10. da Silva,L.F. M. and Adams,R.D.Techniquestoreduce the peel stresses in adhesive joints with composites. Int. J. Adhesion Adhes., 2007, 27(3), 227-235.
11. Kaye, R. H. and Heller, M. Through-thickness shape optimisation of bonded repairs and lap-joints. Int. J. Adhesion Adhes., 2002, 22(1), 7-21.
12. Mazumdar, S. K. and Mallick, K. Static and fatigue behavior of adhesive joints in SMC-SMC composites. Polym. Compos., 1998, 19(2), 139-146.
13. Lang, T. and Mallick, K. The effect of recessing on the stresses in adhesively bonded single-lap joints. Int. J. Adhesion Adhes., 1999, 19(4), 257-271.
14. Lang, T. and Mallick, K. Effect of spew geometry on stresses in single lap adhesive joints. Int. J. Adhesion Adhes., 1998, 18(3), 167-177.
15. Wang,C.H.,Heller,M.,and Rose,L.R.F.Substratestress concentrations in bonded lap joints. J. Strain Anal. Eng. Des., 1998, 33(5), 331-346.
16. Rispler,A. R.,Tong,L., Steven,G. P.,and Wisnom,M. R. Shape optimisation of adhesive fillets. Int. J. Adhesion Adhes., 2000, 20(3), 221-231.
17. Belingardi, G., Goglio, L., and Tarditi, A. Investigating the effect of spew and chamfer size on the stresses in metal/plastics adhesive joints. Int. J. Adhesion Adhes., 2002, 22(4), 273-282.
18. Zeng,Q.and Sun,C.T.Novel designofbonded lap joint. AIAA J., 2001, 39, 1991-1996.
19. Srinivas,S.Analysis ofbonded joints. NASATN D-7855, 1975.
20. Patrick, R. L. (Ed.) Treatise on adhesion and adhe-sives - structural adhesives with emphasis on aerospace applications, 1976, vol. 4 (Marcel Dekker, Inc., NewYork).
21. Fitton, M. D. and Broughton, J. G. Variable modulus adhesives: an approach to optimised joint performance. Int. J. Adhesion Adhes., 2005, 25(4), 329-336.
22. da Silva, L. F. M. and Adams, R. D. Joint strength predictions for adhesive joints to be used over a wide temperature range. Int. J. Adhesion Adhes., 2007, 27(5), 362-379.
23. da Silva, L. F. M. and Adams, R. D. Adhesive joints at high and low temperatures using similar and dissimilar adherends and dual adhesives. Int. J. Adhesion Adhes., 2007, 27(3), 216-226.
24. Ganesh, V. K., Ramakrishna, S., and Leck, H. J. Fiber reinforced composite based functionally gradient materials. Adv. Compos. Lett., 1998, 7, 111-115.
25. Ganesh,V. K. and Choo,T. S. Modulus graded composite adherends for single-lap bonded joints. J. Compos. Mater., 2002, 36(14), 1757-1767.
26. Boss,J.N.,Ganesh,V.K.,andLim,C.T.Modulusgrading versus geometrical grading of composite adherends in single-lap bonded joints. Compos. Struct.s, 2003, 62(1), 113-121.
27. Rastogi, N., Soni, S. R., and Nagar, A. Thermal stresses in aluminium-to-composite double-lap bonded joints. Adv. Eng. Softw., 1998, 29(3-6), 273-281.
28. Owens, J. F. P. and Lee-Sullivan, P. Stiffness behaviour due to fracture in adhesively bonded composite-to-aluminum joints II. Experimental. Int. J. Adhesion Adhes., 2000, 20(1), 47-58.
29. Adkins, D. W. and Byron Pipes, R. End effects in scarf joints. Compos. Sci. Technol., 1985, 22(3), 209-221.
30. Ikegami,K.,Takeshita,T.,Matsuo,K.,andSugibayashi, T. Strength of adhesively bonded scarf joints between glass fiber-reinforced plastics and metals. Int. J. Adhesion Adhes., 1990, 10(3), 199-206.
31. Gunnion, A. J. and Herszberg, I. Parametric study of scarf joints in composite structures. Compos. Struct., 2006, 75(1-4), 364-376.
32. Harman, A. B. and Wang, C. H. Improved design methods for scarf repairs to highly strained composite aircraft structure. Compos. Struct., 2006, 75(1-4), 132-144.
33. Wang,C. H. and Gunnion,A. J. On the design methodology of scarf repairs to composite laminates. Compos. Sci. Technol., 2008, 68(1), 35-46.
34. Johnson, C. L. Effect of ply stacking sequence on stress in a scarf joint. AIAA J., 1989, 2, 79-86.
35. Hicks, I. A., Read, P. J. C. L., and Shenoi, R. A. Tensile compressive and flexural characteristics of tee-joints in foam-cored sandwich structures. Sandwich Constr. 3, 1996, 1, 579-590.
36. Rispler,A. R., Steven,G. P., and Tong,L. Failure analysis of composite T-joints including inserts. J. Reinf. Plast. Compos., 1997, 16(18), 1642-1658.
37. Shenoi, R. A., Read, P., and Jackson, C. L. Influence of joint geometry and load regimes on sandwich tee joint behaviour. J. Reinf. Plast. Compos., 1998, 17(8), 725-740.
38. Theotokoglou, E. E. and Moan, T. Experimental and numerical study of composite T-joints. J. Compos. Mater., 1996, 30(2), 190-209.
39. Theotokoglou, E. E. Study of the numerical fracture mechanics analysisofcompositeT-joints. J. Reinf. Plast. Compos., 1999, 18(3), 215-223.
40. Shenoi,R. A. and Violette, F. L. M. A study of structural composite tee joints in small boats. J. Compos. Mater., 1990, 24, 644-666.
41. Shenoi, R. A.and Hawkins, G. L. Influence of material and geometry variations on the behaviour of bonded tee connections in FRP ships. Composites, 1992, 23(5), 335-345.
42. Dodkins,A. R.,Shenoi,R. A.,and Hawkins,G.L.Design of joints and attachments in FRP ships' structures. Mar. Struct., 1994, 7(2-5), 365-398.
43. Theotokoglou, E. E. Strength of composite T-joints under pull-out loads. J. Reinf. Plast. Compos., 1997, 16(6), 503-518.
44. Phillips, H. J. and Shenoi, R. A. Damage tolerance of laminated tee joints in FRP structures. Compos. A, Appl. Sci. Manuf., 1998, 29(4), 465-478.
45. Dulieu-Barton, J. M., Earl, J. S., and Shenoi, R. A. Determination of the stress distribution in foam-cored sandwich construction composite tee joints. J. Strain Anal. Eng. Des., 2001, 36(6), 545-560.
46. Toftegaard, H. and Lystrup, A. Design and test of lightweight sandwich T-joint for naval ships. Compos. A, Appl. Sci. Manuf., 2005, 36(8), 1055-1065.
47. da Silva, L. F. M., Silva, R. A. M. D., Chousal, J. A. G., and Pinto, A. M. G. Alternative methods to measure the adhesive shear displacement in the thick adherend shear test. J. Adhes. Sci. Technol., 2008, 22(1), 15-29.
48. Maheri, M. R. and Adams, R. D. Determination of dynamic shear modulus of structural adhesives in thick adherend shear test specimens. Int. J. Adhesion Adhes., 2002, 22(2), 119-127.
49. Vodicka, R. Accelerated environmental testing of composite materials. Report DSTO-TR-0657, 1997.
50. Wright, W. W. A review of the influence of absorbed moisture on the properties of composite materials based on epoxy resins. RAE Technical Memorandum, Mat324, 1979.
51. Kinloch, A. J. Durability of structural adhesives, 1983 (Applied Science Publishers, London).
52. Ashcroft, I. A., Abdel Wahab, M. M., Crocombe, A. D., Hughes,D. J., and Shaw,S. J. The effect of environment on the fatigue of composite joints: part 1, testing and fractography. Compos. A, 2001, 32, 45-58.
53. Parker, B. M. The effect of composite pre-bond moisture on adhesive-bonded CFRP-CFRP joints. Composites, 1983, 14(3), 226-232.
54. Parker,B. M.The strengthofbonded carbonfibre composite joints exposed to high humidity. Int. J. Adhesion Adhes., 1990, 10(3), 187-191.
55. Parker, B. M. Some effects of moisture on adhesive-bonded CFRP-CFRP joints. Compos. Struct., 1986, 6, 123-139.
56. Crocombe, A. D. Durability modelling concepts and tools for the cohesive environmental degradation of bonded structures. Int. J. Adhesion Adhes., 1997, 17(3), 229-238.
57. Loh,W. K., Crocombe, A. D., Abdel Wahab, M. M. and Ashcroft, I. A. Environmental degradation of the inter-facial fracture energy in an adhesively bonded joint. Eng. Fract. Mech., 2002, 69(18), 2113-2128.
58. Loh, W. K., Crocombe, A. D., Wahab, M. M. A., and Ashcroft, I. A. Modelling interfacial degradation using interfacial rupture elements. J. Adhes., 2003, 79(12), 1135-1160.
59. Crocombe, A. D., Hua, Y. X., Loh, W. K., Wahab, M. A., and Ashcroft, I. A. Predicting the residual strength for environmentally degraded adhesive lap joints. Int. J. Adhesion Adhes., 2006, 26(5), 325-336.
60. Liljedahl, C. D. M., Crocombe, A. D., Wahab, M. A., and Ashcroft,I. A. Modelling the environmental degradation of the interface in adhesively bonded joints using a cohesive zone approach. J. Adhes., 2006, 82(11), 1061-1089.
61. Hua, Y., Crocombe, A. D., Wahab, M. A., and Ashcroft, I. A. Modelling environmental degradation in EA9321-bonded joints using a progressive damage failure model. J. Adhes., 2006, 82(2), 135-160.
62. Hua, Y., Crocombe, A. D., Wahab, M. A., and Ashcroft, I. A. Continuum damage modelling of environmental degradation in joints bonded with EA9321 epoxy adhesive. Int. J. Adhesion Adhes., 2008, 28(6), 302-313.
63. Earl,J. S.,Dulieu-Barton,J. M.,and Shenoi,R.A. Determination of hygrothermal ageing effects in sandwich construction joints using thermoelastic stress analysis. Compos. Sci. Technol., 2003, 63(2), 211-223.
64. ASTM D 5573-99. Standard practice for classifying failure modes in fiber-reinforced-plastic (FRP) joints. Annual Book of ASTM Standards, 15.03, 2002.
65. Kim, K. S., Yoo, J. S., Yi, Y. M., and Kim, C. G. Failure mode and strength of uni-directional composite single lap bonded joints with different bonding methods. Compos. Struct., 2006, 72, 477-485.
66. Kim, J. K., Kim, H. S., and Lee, D. G. Investigation of optimal surface treatments for carbon/epoxy composite adhesive joints. J. Adhes. Sci. Technol., 2003, 17(3), 329-352.
67. Tsai, M. Y. and Morton, J. The effect of a spew fillet on adhesive stress distributions in laminated composite single-lap joints. Compos. Struct., 1995, 32, 123-131.
68. Kairouz, K. C. and Matthews, F. L. Strength and failure modes of bonded single lap joints between cross-ply adherends. Composites, 1993, 24(6), 475-484.
69. Cheuk, T. and Tong, L. Failure of adhesive bonded composite lap shear joints with embedded precrack. Compos. Sci. Technol., 2002, 62, 1079-1095.
70. Potter, K. D., Guild, F. J., Harvey, H. J., Wisonm, M. R., and Adams, R. D. Understanding and control of adhesive crack propagation in bonded joints between carbon fibre composite adherends, I. Experimental. Int. J. Adhesion Adhes., 2001, 21, 435-443.
71. Tong, L. Failure of adhesive-bonded composite single lap joints with embedded cracks. AIAA J., 1998, 36(3), 448-456.
72. Qin,M. H. and Dzenis,Y. A. Analysis of single lap adhesive composite joints with delaminated adherends. Compos. B, Eng., 2003, 34(2), 167-173.
73. Kayupov, M. and Dzenis, Y. A. Stress concentrations caused by bond cracksin single-lapadhesive composite joints. Compos. Struct., 2001, 54(2-3), 215-220.
74. Kumar, S. B., Sivashanker, S., Bag, A., and Sridhar, I. Failure of aerospace composite scarf-joints subjected to uniaxial compression. Mater. Sci. Eng. A, Struct. Mater., Prop. Microstruct. Process., 2005, 412(1-2), 117-122.
75. Kumar,S.B.,Sridhar,I.,Sivashanker,S.,Osiyemi,S.O., and Bag, A. Tensile failure of adhesively bonded CFRP composite scarf joints. Mater. Sci. Eng. B, Solid-State Mater. Adv. Technol., 2006, 132(1-2), 113-120.
76. Kim, K. S., Yi, Y. M., Cho, G. R., and Kim, C. G. Failure prediction and strength improvement of unidirectional composite single lap bonded joints. Compos. Struct., 2008, 82(4), 513-520.
77. Guild,F. J., Potter,K. D., Heinrich, J., Adams, R. D., and Wisonm, M. R. Understanding and control of adhesive crack propagation in bonded joints between carbon fibre composite adherends, II. Finite element analysis. Int. J. Adhesion Adhes., 2001, 21, 445-453.
78. Kim, H. The influence of adhesive bondline thickness imperfections on stresses in composite joints. J. Adhesion, 2003, 79(7), 621-642.
79. Turaga,U.V. R. S. and Sun,C.T. Failure modes and load transferin sandwichT-joints.J. Sandwich Struct. Mater., 2000, 2, 225-245.
80. Volkersen, O. Die Niektraftverteilung in Zug-beanspruchten mit Konstanten Laschenquerschritten. Luftfahrtforschung, 1938, 15, 41-68.
81. Goland, M. and Reissner, E. The stresses in cemented lap joints. Trans. ASME, J. Appl. Mech., 1944, 66(11), A17-A27.
82. da Silva, L. F. M., das Neves, P. J. C., Adams, R. D., and Spelt, J. K. Analytical models of adhesively bonded joints part I: literature survey. Int. J. Adhesion Adhes., 2008, doi:10.1016/j.ijadhadh. 2008.06.005.
83. Hart-Smith, L. J. Adhesive-bonded single-lap joints. Douglas Aircraft Co., NASA Langley report CR 112236, 1973.
84. Hart-Smith, L. J. Analysis and design of advanced composite bonded joints. Douglas Aircraft Co., NASA Langley report CR-2218, 1974.
85. Renton, W. J. and Vinson, J. R. The efficient design of adhesive bonded joints. J. Adhes., 1975, 175-193.
86. Dattaguru, B., Everett, R. A., Whitcomb, J. D., and Johnson, W. S. Geometrically nonlinear-analysis of adhesively bonded joints. Trans. ASME, J. Eng. Mater. Technol., 1984, 106(1), 59-65.
87. Pickett, A. K. and Hollaway, L. The analysis of elastic-plastic adhesive stress in bonded lap joints in FRP structures. Compos. Struct., 1985, 4, 135-160.
88. Renton, W. J. and Vinson, J. R. Analysis of adhesively bonded joints between panels of composite materials. J. App. Mech., 1977, 44, 101-106.
89. Delale, F., Erdogan, F., and Aydinoglu, M. N. Stresses in adhesively bonded joints - a closed-form solution. J. Compos. Mater., 1981, 15, 249-271.
90. Allman,D. J. A theory for the elastic stresses in adhesive bonded lap joints. Q. J. Mech. Appl. Math., 1977, 30, 415-436.
91. Adams, R. D. and Mallick, V. A method for the stress analysis of lap joints. J. Adhes., 1992, 38, 199-217.
92. Yang, C. and Pang, S. S. Stress-strain analysis of single-lap composite joints under cylindrical bending. Compos. Eng., 1993, 3, 1051-1063.
93. Yang,C. and Pang,S. S. Stress-strain analysis of single-lap composite joints under tension.ASME Trans.,J. Eng. Mater. Technol., 1996, 118, 247-255.
94. Wu, Z. J., Romeijn, A., and Wardenier, J. Stress expressions of single-lap adhesive joints of dissimilar adherends. Compos. Struct., 1997, 38(1-4), 273-280.
95. Tong, L. An assessment of failure criteria to predict the strength of adhesively bonded composite double lap joints. J. Reinf. Plast. Compos., 1997, 16(8), 698-713.
96. Frostig, Y., Thomsen, O. T., and Mortensen, F. Analysis of adhesive-bonded joints, square-end, and spew-fillet - high-order theory approach. J. Eng. Mech. - ASCE, 1999, 125(11), 1298-1307.
97. Frostig, Y., Baruch M., Vilnai, O., and Sheinman, I. High-order theory for sandwich-beam behavior with transversely flexible core. J. Eng. Mech. - ASCE, 1992, 118(5), 1026-1043.
98. das Neves, P. J. C., da Silva, L. F. M., and Adams, R. D. Analysis of mixed adhesive bonded joints part I: theoretical formulation. J. Adhes. Sci. Technol., 2009, 23, 1-34.
99. das Neves, P. J. C., da Silva, L. F. M., and Adams, R. D. Analysis of mixed adhesive bonded joints part II: parametric study.J.Adhes.Sci. Technol., 2009,23, 35-61.
100. Mortensen, F. and Thomsen, O. T. Analysis of adhesive bonded joints: a unified approach. Compos. Sci. Technol., 2002, 62, 1011-1031.
101. Yang, C., Huang, H.,Tomblin, J. S., and Sun,W. Elastic-plastic model of adhesive-bonded single-lap composite joints. J. Compos. Mater., 2004, 38(4), 293-309.
102. Zou, G. P., Shahin, K., and Taheri, F. An analytical solution for the analysis of symmetric composite adhesively bonded joints. Compos. Struct., 2004, 65(3-4), 499-510.
103. Zhang, J., Bednarcyk, B. A., Collier, C., Yarrington, P., Bansal, Y., and Pindera, M. J. Analysis tools for adhesively bonded composite joints, part 2: unified analytical theory. AIAA J., 2006, 44(8), 1709-1719.
104. Harris, J. A. and Adams, R. D. Strength prediction of bonded single lap joints by nonlinear finite element methods. Int. J. Adhesion Adhes., 1984, 4(2), 65-78.
105. Adams, R. D., Atkins, R. W., Harris, J. A., and Kinloch, A. J. Stress analysis and failure properties of carbon-fibre reinforced plastic/steel double lap-joint. J. Adhes., 1986, 20, 29-33.
106. Crocombe, A. D., Bigwood, D. A., and Richardson, G. Analysing structural adhesive joints for failure. Int. J. Adhesion Adhes., 1990, 10(3), 167-178.
107. Adams, R. D. and Harris, J. A. The influence of local geometry on the strength of adhesive joints. Int. J. Adhesion Adhes., 1987, 7(2), 69-80.
108. Bogy, D. B. Edge bonded dissimilar orthogonal elastic wedges under normal and shear loading. Trans. ASME, J. Appl. Mech., 1968, 35, 460-466.
109. Towse, A., Potter, K. D., Wisnom, M. R., and Adams, R. D.The sensitivity of aWeibull failure criterion to singularity strength and local geometry variations. Int. J. Adhesion Adhes., 1999, 19, 71-82.
110. Hutchinson, J. W. and Suo, Z. Mixed-mode cracking in layered materials. Adv. Appl. Mech., 1992, 29, 63-191.
111. Xu, J.-Q., Liu,Yi.-H., and Wang, X.-G. Numerical methods for the determination of multiple stress singularities and related stress intensity coefficients. Eng. Fract. Mech., 1999, 63(6), 775-790.
112. Groth,H. L.Stress singularities and fractureat interface corners in bonded joints. Int. J. Adhesion Adhes., 1988, 8(2), 107-113.
113. Gleich,D.M.,VanTooren,M.J.L.,and Beukers,A.Analysis and evaluation of bondline thickness effects on failure load in adhesively bonded structures. J. Adhes. Sci. Technol., 2001, 15(9), 1091-1101.
114. Needleman, A. A continuum model for void nucle-ation by inclusion debonding. J. Appl. Mech., 1987, 54, 525-531.
115. Ungsuwarungsri,T. and Knauss,W.G. Roleofdamage-softened material behavior in the fracture of composites and adhesives. Int. J. Fract., 1987, 35, 221-241.
116. Tvergaard, V. and Hutchinson, J. W. The relation between crack growth resistance and fracture parameters in elastic-plastic solids. J. Mech. Phys. Solids, 1992, 40, 1377-1397.
117. Sørensen, B. F. and Jacobsen, T. K. Determination of cohesive laws by the J-integral approach. Eng. Fract. Mech., 2003, 70, 1841-1858.
118. Li, S.,Thouless,M. D.,Waas,A. M.,Schroeder,J. A.,and Zavattieri,P. D.W Use of mode-I cohesive-zone models to describe the fracture of an adhesively-bonded polymer-matrix composite. Compos. Sci. Technol., 2005, 65(2), 281-293.
119. Li, S., Thouless, M. D., Waas, A. M., Schroeder, J. A., and Zavattieri, P. D.W Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite. Compos. Sci. Technol., 2005, 65(3-4), 537-549.
120. Li, S., Thoules, M. D., Waas, A. M., Schroeder, J. A., and Zavattieri, P. D. Competing failure mechanisms in mixed- modefractureofanadhesivelybonded polymer-matrix composite. Int. J. Adhesion Adhes., 2006, 26(8), 609-616.
121. Li, S., Thouless, M. D., Waas, A. M., Schroeder, J. A., and Zavattieri, P. D. Mixed-mode cohesive-zone models for fracture of an adhesively bonded polymer-matrix composite. Eng. Fract. Mech., 2006, 73(1), 64-78.
122. Liljedahl,C. D. M., Crocombe,A. D.,Wahab,M. A., and Ashcroft,I. A. Damage modelling of adhesively bonded joints. Int. J. Fract., 2006, 141(1-2), 147-161.
123. Blackman, B. R. K., Hadavinia, H., Kinloch, A. J., and Williams,J.G.The useofacohesive zone modeltostudy the fracture of fibre composites and adhesively-bonded joints. Int. J. Fract., 2003, 119(1), 25-46.
124. Tvergaard, V. and Hutchinson, J. W. The influence of plasticity on mixed mode interface toughness. J. Mech. Phys. Solids, 1993, 41(6), 1119-1135.
125. Tvergaard, V. and Hutchinson, J. W. On the toughness of ductile adhesive joints. J. Mech. Phys. Solids, 1996, 44(5), 789-800.
126. Madhusudhana,K.S. and Narasimhan,R. Experimental and numerical investigations of mixed mode crack growth resistance of a ductile adhesive joint. Eng. Fract. Mech., 2002, 69(7), 865-883.
127. Li, H. and Chandra, N. Analysis of crack growth and crack-tip plasticity in ductile materials using cohesive zone models. Int. J. Plast., 2003, 19(6), 849-882.
128. Tvergaard, V. Resistance curves for mixed mode interface crack growth between dissimilar elastic-plastic solids. J. Mech. Phys. Solids, 2001, 49(11), 2689-2703.
129. de Moura, M. F. S. F., Gonçalves, J. P. M., Chousal, J. A. G., and Campilho, R. D. S. G. Cohesive and continuum mixed-mode damage models applied to the simulation of the mechanical behaviour of bonded joints. Int. J. Adhes., 2008, 28(8), 419-426.