Thermomechanical behavior and constitutive modeling of tungsten-based composite over wide temperature and strain rate ranges

International Journal of Plasticity

Volumn 40, Issue , 2013, Pages 163-184

  Xu, Zejian ^a   Huang, Fenglei ^a  

^a BEIJING INSTITUTE OF TECHNOLOGY   (China)

Author keywords

Microstructural evolution; Strain rate temperature sensitivity; Thermomechanical behavior; Tungsten based composite; Work hardening rate

Indexed keywords

DYNAMIC TESTS; MICROMECHANISMS; PREDICTIVE CAPABILITIES; QUASI-STATIC; STRAIN RATE EFFECT; THERMO-MECHANICAL BEHAVIORS; WORK-HARDENING RATE;

CONSTRAINED OPTIMIZATION; HARDENING; MICROSTRUCTURAL EVOLUTION; REGRESSION ANALYSIS; TUNGSTEN;

STRAIN RATE;

EID: 84869096284     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2012.08.004     Document Type: Article

References (60)

1. F.H. Abed, and G.Z. Voyiadjis Plastic deformation modeling of LA-6XN stainless steel at low and high strain rates and temperatures using a combination of bcc and fcc mechanisms of metals International Journal Plasticity 21 2005 1618 1639
2. R.A. Austin, and D.L. McDowell A dislocation-based constitutive model for viscoplastic deformation of fcc metals at very high strain rates International Journal of Plasticity 27 2011 1 24
3. S.R. Bodner, and Y. Partom A large deformation elastic-viscoplastic analysis of a thick-walled spherical shell Journal of Applied Mechanics 39 1972 751 757
4. S.R. Bodner, and Y. Partom Constitutive equations for elastic-viscoplastic strain hardening materials Journal of Applied Mechanics 42 1975 385 389
5. A.P. Brahme, K. Inal, R.K. Mishra, and S. Saimoto A new strain hardening model for rate-dependent crystal plasticity Computational Materials Science 2011 10.1016/j.commatsci.2011.05.006
6. M. Brünig An anisotropic ductile damage model based on irreversible thermodynamics International Journal of Plasticity 19 2003 1679 1713
7. M. Brünig Continuum framework for rate-dependent behavior of anisotropic damaged ductile metals Acta Mechanica 186 2006 37 53
8. M. Brünig, and S. Gerke Simulation of damage evolution in ductile metals undergoing dynamic loading conditions International Journal of Plasticity 2011 10.1016/j.ijplas.2011.02.003
9. R.S. Coates, and K.T. Ramesh The rate-dependent deformation of a tungsten heavy alloy Materials Science and Engineering A145 1991 159 166
10. J.D. Colvin, R.W. Minich, and D.H. Kalantar A model for plasticity kinetics and its role in simulating the dynamic behavior of Fe at high strain rates International Journal of Plasticity 25 2009 603 611
11. W.H. Cook, A.M. Rajendran, and D.J. Grove An efficient numerical implementation of Bodner-Partom Model in EPIC-code Journal of Engineering Fracture Mechanics 41 5 1992 607 623
12. X.G. Fan, and H. Yang Internal-state-variable based self-consistent constitutive modeling for hot working of two-phase titanium alloys coupling microstructure evolution International Journal of Plasticity 2011 10.1016/j.ijplas.2011.05.008
13. X.G. Fan, H. Yang, Z.C. Sun, and D.W. Zhang Quantitative analysis of dynamic recrystallization behavior using a grain boundary evolution based kinetic model Materials Science and Engineering A527 2010 5368 5377
14. B. Farrokh, and A.S. Khan Grain size, strain rate, and temperature dependence of flow stress in ultra-fine grained and nanocrystalline Cu and Al: synthesis, experiment, and constitutive modeling International Journal Plasticity 25 2009 715 732
15. P. Follansbee, and U. Kocks A constitutive description of the deformation of copper based on the use of the mechanical threshold as an internal state variable Acta Metallurgica 36 1988 81 97
16. K.G. Hoge, and A.K. Mukherjee The temperature and strain rate dependence of the flow stress of tantalum Journal of Materials Science 12 1977 1666 1672
17. S. Huang, and A.S. Khan Modeling the mechanical behavior of 1100-0 aluminum at different strain rates by the Bodner-Partom model International Journal Plasticity 8 1992 501 517
18. Johnson, G.R.; Cook, W.H.; 1983. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures [C]. In: Proceedings of the 7th International Symposium on Ballistics, The Hague, Netherlands, pp. 541-547.
19. C. Jiang, and B. Zhang Temperature effect on modulus, specific heat and thermal expansion coefficient of 93W sintered alloys Ordnance Material Science and Engineering 23 3 2000 3 6
20. A.S. Khan, R. Kazmi, and B. Farrokh Multiaxial and non-proportional loading responses, anisotropy and modeling of Ti-6Al-4V titanium alloy over wide ranges of strain rates and temperatures International Journal Plasticity 23 2007 931 950
21. A.S. Khan, R. Kazmi, B. Farrokh, and M. Zupan Effect of oxygen content and microstructure on the thermo-mechanical response of three Ti-6Al-4V alloys: experiments and modeling over a wide range of strain-rates and temperatures International Journal Plasticity 23 7 2007 1105 1125
22. A.S. Khan, and R. Liang Behaviors of three BCC metal over a wide range of strain rates and temperatures: experiments and modeling International Journal Plasticity 15 1999 1089 1109
23. A.S. Khan, O. Lopez-Pamies, and R. Kazmi Thermo-mechanical large deformation response and constitutive modeling of viscoelastic polymers over a wide range of strain rates and temperatures International Journal Plasticity 22 2006 581 601
24. A.S. Khan, Y.S. Suh, and R. Kazmi Quasi-static and dynamic loading responses and constitutive modeling of titanium alloys International Journal Plasticity 20 2004 2233 2248
25. A.S. Khan, and H. Zhang Mechanically alloyed nanocrystalline iron and copper mixture: behavior and constitutive modeling over a wide range of strain rates International Journal Plasticity 16 2000 1477 1492
26. A.S. Khan, and H. Zhang Finite deformation of a polymer: experiments and modeling International Journal Plasticity 17 2001 1167 1188
27. A.S. Khan, and S. Yu Deformation induced anisotropic responses of Ti-6Al-4V alloy, Part I: experiments International Journal of Plasticity 2012 10.1016/j.ijplas.2012.03.015
28. A.S. Khan Deformation induced anisotropic responses of Ti-6Al-4V alloy, Part II: A strain rate and temperature dependent anisotropic yield criterion International Journal of Plasticity 2012 10.1016/j.ijplas.2012.03.013
29. D.S. Kim, S. Nemat-Nasser, J.B. Isaacs, and D. Lischer Adiabatic shearband in WHA in high-strain-rate compression Mechanics of Materials 28 1998 227 236
30. J.R. Klepaczko, A. Rusinek, J.A. Rodríguez-Martínez, R.B. Peȩcherski, and A. Arias Modelling of thermo-viscoplastic behaviour of DH-36 and Weldox 460-E structural steels at wide ranges of strain rates and temperatures, comparison of constitutive relations for impact problems Mechanics of Materials 41 2009 599 621
31. W.S. Lee, and S.T. Chiou The influence of loading rate on shear deformation behaviour of tungsten composite Composites: Part B 27B 1996 193 200
32. W.S. Lee, G.L. Xiea, and C.F. Lin The strain rate and temperature dependence of the dynamic impact response of tungsten composite Materials Science Engineering A257 1998 256 267
33. W.S. Lee, C.F. Lin, and S.T. Chang Plastic flow of tungsten-based composite under hot compression Journal of Materials Processing Technology 100 2000 123 130
34. A.M. Lennon, and K.T. Ramesh The influence of crystal structure on the dynamic behavior of materials at high temperatures International Journal of Plasticity 20 2 2004 269 290
35. R. Liang, and A.S. Khan A critical review of experimental results and constitutive models of BCC and FCC metals over a wide range of strain rates and temperatures International Journal of Plasticity 15 1999 963 980
36. H. Mecking, and U.F. Kocks Kinetics of flow and strain-hardening Acta Metallurgica 29 11 1981 1865 1875
37. M.A. Meyers, D.J. Benson, O. Vohringer, B.K. Kad, Q. Xue, and H.-H. Fu Constitutive description of dynamic deformation: physically-based mechanisms Materials Science and Engineering A322 2002 194 216
38. S. Nemat-Nasser, and W. Guo Flow stress of commercially pure niobium over a broad range of temperatures and strain rates Materials Science and Engineering A284 2000 202 210
39. S. Nemat-Nasser, and W. Guo Thermomechanical response of DH-36 structural steel over a wide range of strain rates and temperatures Mechanics of Materials 35 2003 1023 1047
40. S. Nemat-Nasser, and J.B. Isaacs Direct measurement of isothermal flow stress of metals at elevated temperatures and high strain rates with application to Ta and Ta-W alloys Acta Materialia 45 1997 907 919
41. S. Nemat-Nasser, and Y. Li Flow stress of FCC polycrystals with application to OFHC Cu Acta Materialia 46 2 1998 565 577
42. A.M. Rajendran, S.J. Bless, and D.S. Dawicke Evaluation of Bodner-Partom Model parameters at high strain rates Journal of Engineering Materials and Technology, Transactions on ASME 108 1986 75 80
43. J.A. Rodríguez-Martínez, A. Rusinek, and J.R. Klepaczko Constitutive relation for steels approximating quasi-static and intermediate strain rates at large deformations Mechanics Research Communications 36 2009 419 427
44. I. Rohr, H. Nahme, K. Thoma, and C.E. Anderson Jr. Material characterization and constitutive modeling of a tungsten-sintered alloy for a wide range of strain rates International Journal of Impact Engineering 35 2008 811 819
45. A. Rusinek, and J.R. Klepaczko Shear testing of a sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress International Journal of Plasticity 17 2001 87 115
46. A. Rusinek, J.A. Rodríguez-Martínez, J.R. Klepaczko, and R.B. Peȩcherski Analysis of thermo-visco-plastic behaviour of six high strength steels Journal of Materials and Design 30 2009 1748 1761
47. A. Rusinek, R. Zaera, and J.R. Klepaczko Constitutive relations in 3-D for a wide range of strain rates and temperatures - Application to mild steels International Journal of Solids and Structures 44 2007 5611 5634
48. S. Saimoto, and P.V. Houtte Constitutive relation based on Taylor slip analysis to replicate work-hardening evolution Acta Materialia 59 2011 602 612
49. J.H. Sung, J.H. Kim, and R.H. Wagoner A plastic constitutive equation incorporating strain, strain-rate, and temperature International Journal of Plasticity 26 2010 1746 1771
50. G.Z. Voyiadjis, and F.H. Abed Microstructural based models for bcc and fcc metals with temperature and strain rate dependency Mechanics of Materials 37 2005 355 378
51. G.Z. Voyiadjis, and A.H. Almasri A physically based constitutive model for fcc metals with applications to dynamic hardness Mechanics of Materials 40 2008 549 563
52. Q. Wei Mechanical behavior and dynamic failure of high-strength ultrafine grained tungsten under uniaxial compression Acta Materialia 54 2006 77 87
53. Xu, Z.; Huang, F.; 2012a. Plastic behavior and constitutive modeling of armor steel over wide temperature and strain rate ranges. Acta Mechanica Solida Sinica, in press.
54. Xu, Z.; Huang, F.; c. Comparison of constitutive models for FCC metals over wide temperature and strain rate ranges with application to pure copper, submitted for publication.
55. Z. Xu, and F. Huang Comparison of physically based constitutive models characterizing armor steel over wide temperature and strain rate ranges Modelling and Simulation in Materials Science and Engineering. 2012 20 2012 015005
56. Z. Xu, and Y. Li Dynamic behaviors of 0Cr18Ni10Ti stainless steel welded joints at elevated temperatures and high strain rates Mechanics of Materials 41 2009 121 130
57. S. Yadav, and K.T. Ramesh The mechanical properties of tungsten-based composites at very high strain rates Materials Science and Engineering A203 1995 140 153
58. F.J. Zerilli, and R.W. Armstrong Dislocation-mechanics-based constitutive relations for material dynamics calculations Journal of Applied Physics 61 5 1987 1816 1825
59. F.J. Zerilli, and R.W. Armstrong Description of tantalum deformation behavior by dislocation mechanics based constitutive relations Journal of Applied Physics 68 4 1990 1580 1590
60. Y. Zhou, Y. Wang, P.K. Mallick, and Y. Xia Strain softening constitutive equation for tungsten heavy alloy under tensile impact Materials Letters 58 2004 2725 2729