Constitutive relation for steels approximating quasi-static and intermediate strain rates at large deformations

Mechanics Research Communications

Volumn 36, Issue 4, 2009, Pages 419-427

  Rodriguez Martinez J A ^a   Rusinek, A ^b   Klepaczko, J R ^b  

^a UNIVERSIDAD CARLOS III DE MADRID   (Spain)

^b UNIVERSITÉ DE LORRAINE   (France)

Author keywords

Constitutive relation; Large deformation; Steel; Strain rate sensitivity

Indexed keywords

ANALYTICAL FORMULATIONS; ANALYTICAL PREDICTIONS; CONSTITUTIVE RELATION; EXPERIMENTAL DATUM; HARDENING EVOLUTIONS; HARDENING FUNCTIONS; INTERMEDIATE STRAIN RATES; LARGE DEFORMATION; MATERIAL CONSTANTS; MATERIAL PARAMETERS; MECHANICAL TESTS; MICRO-MECHANISMS; QUASI STATICS; STRAIN EVOLUTIONS; STRAIN RATE SENSITIVITY; SYSTEMATIC METHODS; THERMO-VISCOPLASTIC;

DEFORMATION; PARAMETER ESTIMATION; PLASTICITY; STEEL; STRAIN HARDENING;

STRAIN RATE;

EID: 64549158046     PISSN: 00936413     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mechrescom.2008.12.001     Document Type: Article

References (31)

1. Allain S., Cugy P., Scott C., Chateau J.P., Rusinek A., and Deschamps A. The influence of plastic instabilities on the mechanical properties of a high-manganese austenitic FeMnC steel. Int. J. Mater. Res. 99 (2008) 7
2. Berbenni S., Favier V., Lemoine X., and Berveiller N. Micromechanical modelling of the elastic-viscoplastic behaviour of polycrystalline steels having different microstructures. Mater. Sci. Eng. 372 (2004) 128-136
3. Bodner S.R., and Partom Y. Constitutive equations for elastic-viscoplastic strain-hardening materials. ASME J. Appl. Mech. 42 (1975) 385-389
4. Bouaziz O., and Guelton N. Modelling of TWIP effect on work-hardening. Mater. Sci. Eng. A 319 (2001) 246-249
5. Clausen A.H., Børvik T., Hopperstad O.S., and Benallal A. Flow and fracture characteristics of aluminium alloy AA5083-H116 as function of strain rate, temperature and triaxiality. Mater. Sci. Eng. A 364 (2004) 260-272
6. Cowper, G.R., Symonds, P.S., 1952. Strain hardening and strain rate effects in the impact loading of cantilever beams. Brown Univ., Div. of Appl. Mech., Report No. 28.
7. Durrenberger L., Klepaczko J.R., and Rusinek A. Constitutive modeling of metals based on the evolution of the strain-hardening rate. Trans. ASME 129 (2007) 550-558
8. Fréchard S., Redjaïmia A., Lach E., and Lichtenberger A. Dynamical behaviour and microstructural evolution of a nitrogen-alloyed austenitic stainless steel. Mater. Sci. Eng. A 480 (2008) 89-95
9. Guo W.G., and Nemat-Nasser S. Flow stress of Nitronic-50 stainless steel over a wide range of strain rates and temperatures. Mech. Mater. 38 (2006) 1090-1103
10. Haugou G., Markiewicz E., and Fabis J. On the use of the non direct tensile loading on a classical split Hopkinson bar apparatus dedicated to sheet metal specimen characterisation. Int. J. Impact Eng. 32 (2006) 778-798
11. Johnson, G.R., Cook, W.H., 1983. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. In: Proceedings of 7th International Symposium on Ballistics, pp. 541-547.
12. Khan A. Continuum Theory of Plasticity (1998), Wiley, New York (Chapter 8)
13. Klepaczko J.R. Thermally activated flow and strain rate history effects for some polycrystalline FCC metals. Mater. Sci. Eng. 18 (1975) 121-135
14. Klepaczko J.R. An experimental technique for shear testing at high and very high strain rates. The case of a mild steel. Int. J. Impact Eng. 15 (1994) 25-39
15. Klepaczko, J.R., 1998. A general approach to rate sensitivity and constitutive modeling of FCC and BCC metals. In: Impact: Effects of Fast Transient Loadings, Rotterdam, pp. 3-35.
16. Klepaczko, J.R., Rusinek, A., Rodríguez-Martínez, J.A., Pe{ogonek}cherski, R.B., Arias, A., 2008. Modelling of thermo-viscoplastic behaviour of DH-36 and Weldox 460-E structural steels at wide ranges of strain rates and temperatures, comparison of constitutive relations for impact problems. Mech. Mater. doi:10.1016/j.mechmat.2008.11.004.
17. Lubarda V.A., Benson D.J., and Meyers M.A. Strain-rate effects in rheological models of inelastic response. Int. J. Plast. 19 (2003) 1097-1118
18. Nemat-Nasser S., and Guo W. High strain-rate response of commercially pure vanadium. Mech. Mater. 32 (2000) 243-260
19. Nemat-Nasser S., Guo W.G., and Kihl D.P. Thermomechanical response of AL-6XN stainless steel over a wide range of strain rates and temperatures. J. Mech. Phys. Solids 49 (2001) 1823-1846
20. Oussouaddi O., and Klepaczko J.R. Analysis of transition between the isothermal and adiabatic deformation in the case of torsion of a tube. J. Phys. IV 1 (1991) 323-334 (in French)
21. Reyes A., Hopperstad O.S., Lademo O.G., and Langseth M. Modeling of textured aluminum alloys used in a bumper system: material tests and characterization. Comput. Mater. Sci. 37 (2006) 246-268
22. Rodríguez-Martínez, J.A., Rusinek, A., Klepaczko, J.R., Pe{ogonek}cherski, R.B., 2008. Extension of R-K constitutive relation to phase transformation phenomena. Mater. Des. doi:10.1016/j.matdes.2008.09.043.
23. Rusinek A., and Klepaczko J.R. Shear testing of sheet steel at wide range of strain rates and a constitutive relation with strain-rate and temperature dependence of the flow stress. Int. J. Plast. 17 (2001) 87-115
24. Rusinek A., Zaera R., Klepaczko J.R., and Cheriguene R. Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steel. Acta Mater. 53 (2005) 5387-5400
25. Rusinek A., Zaera R., and Klepaczko J.R. Constitutive relations in 3-D for a wide range of strain rates and temperatures - application to mild steels. Int. J. Solids Struct. 44 (2007) 5611-5634
26. Rusinek, A., Rodríguez-Martínez, J.A., Klepaczko, J.R., Pe{ogonek}cherski, R.B., 2008. Analysis of thermo-visco-plastic behaviour of six high strength steels. Mater. Des. doi:10.1016/j.matdes.2008.07.034.
27. Seeger A. The mechanism of glide and work-hardening in face-centered cubic and hexagonal close-packed metal. Dislocations and Mechanical Properties of Crystals (1957), John Wiley, New York
28. Steinberg D.J., Cochran S.G., and Guinan M.W. Constitutive model for metals applicable at high strain rates. J. Appl. Phys. 51 3 (1980) 1498-1504
29. Zaera R., and Fernández-Sáez J. An implicit consistent algorithm for the integration of thermoviscoplastic constitutive equations in adiabatic conditions and finite deformations. Int. J. Solids Struct. 43 (2006) 1594-1612
30. Zerilli F.J., and Armstrong R.W. Dislocation-mechanics-based constitutive relations for material dynamics calculations. J. Appl. Phys. 61 (1987) 1816-1825
31. Zhao H. A constitutive model for metals over a large range of strain rates. Identification for mild-steel and aluminium sheets. Mater. Sci. Eng. A 1997 (1997) 95-99