Biocompatibility and chemical reaction kinetics of injectable, settable polyurethane/allograft bone biocomposites

Acta Biomaterialia

Volumn 8, Issue 12, 2012, Pages 4405-4416

  Page, Jonathan M ^a,b   Prieto, Edna M ^a,b   Dumas, Jerald E ^a,b   Zienkiewicz, Katarzyna J ^a   Wenke, Joseph C ^c   Brown Baer, Pamela ^c   Guelcher, Scott A ^a,b  

^a VANDERBILT UNIVERSITY   (United States)

^b VANDERBILT UNIVERSITY MEDICAL CENTER   (United States)

^c US ARMY INSTITUTE OF SURGICAL RESEARCH   (United States)

Author keywords

Biocompatibility; Injectable; Lysine; Polyurethane; Reactivity

Indexed keywords

AMINO ACIDS; BIOCOMPATIBILITY; BONE; CATALYSTS; COMPOSITE MATERIALS; CROSSLINKING; CURING; DEFECTS; DEGRADATION; FOURIER TRANSFORM INFRARED SPECTROSCOPY; GELATION; KINETIC PARAMETERS; KINETIC THEORY; MONOMERS; RATE CONSTANTS;

BIOCOMPOSITE; BONE GRAFT; DIPROPYLENE GLYCOLS; INJECTABLE BIOMATERIALS; INJECTABLES; KINETIC MODELS; MINIMALLY-INVASIVE TECHNIQUE; REACTIVE COMPONENTS; REACTIVITY; TRIETHYLENEDIAMINE;

POLYURETHANES;

1,4 DIAZABICYCLO[2.2.2]OCTANE; LYSINE; POLYURETHAN;

ANIMAL TISSUE; ARTICLE; BIOCOMPATIBILITY; BONE GRAFT; CATALYST; CHEMICAL REACTION KINETICS; COMPOSITE GRAFT; CONTROLLED STUDY; INFRARED SPECTROSCOPY; LEACHING; NONHUMAN; PRIORITY JOURNAL; STOICHIOMETRY;

EID: 84868200742     PISSN: 17427061     EISSN: 18787568     Source Type: Journal    
DOI: 10.1016/j.actbio.2012.07.037     Document Type: Article

References (59)

1. Y. Khan Tissue engineering of bone: material and matrix considerations J Bone Joint Surg Am 90A 2008 36 42 (Pubitemid 351329119)
2. R.Z. Legeros, A. Chohayeb, and A. Schulman Apatitic calcium phosphates possible dental restorative materials J Dent Res 61 Special Issue 1982 343
3. H. Chim, and A.K. Gosain Biomaterials in craniofacial surgery experimental studies and clinical application J Craniofac Surg 20 1 2009 29 33
4. A. Moreira-Gonzalez Clinical outcome in cranioplasty: critical review in long-term follow-up J Craniofac Surg 14 2 2003 144 153
5. C.D. Friedman BoneSource (TM) hydroxyapatite cement: a novel biomaterial for craniofacial skeletal tissue engineering and reconstruction J Biomed Mater Res 43 4 1998 428 432 (Pubitemid 28544102)
6. G. Gasparini Cranial reshaping using methyl methacrylate: technical note J Craniofac Surg 20 1 2009 184 190
7. M. Bohner Designing ceramics for injectable bone graft substitutes B.L. Vernon, Injectable biomaterials: science and applications 2011 Woodhead Publishing Philadelphia, PA
8. A.J. Wagoner Johnson, and B.A. Herschler A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repair Acta Biomater 7 1 2011 16 30
9. C. Chan Evaluation of Bioglass/dextran composite as a bone graft substitute Int J Oral Maxillofac Surg 31 1 2002 73 77
10. M. Chazono Bone formation and bioresorption after implantation of injectable beta-tricalcium phosphate granules-hyaluronate complex in rabbit bone defects J Biomed Mater Res A 70A 4 2004 542 549 (Pubitemid 39121879)
11. Z. Schwartz Clinical evaluation of demineralized bone allograft in a hyaluronic acid carrier for sinus lift augmentation in humans: a computed tomography and histomorphometric study Clin Oral Implant Res 18 2 2007 204 211
12. F.P. Cammisa Two-year fusion rate equivalency between Grafton (R) DBM gel and autograft in posterolateral spine fusion Spine 29 6 2004 660 666
13. E.J. Adolph Injectable polyurethane composite scaffolds delay wound contraction and support cellular infiltration and remodeling in rat excisional wounds J Biomed Mater Res A 100A 2 2012 450 461
14. A.E. Hafeman Characterization of the degradation mechanisms of lysine-derived aliphatic poly(ester urethane) scaffolds Biomaterials 32 2 2011 419 429
15. J.E. Dumas Synthesis, characterization, and remodeling of weight-bearing allograft bone/polyurethane composites in the rabbit Acta Biomater 6 7 2010 2394 2406
16. S. Bennett Initial biocompatibility studies of a novel degradable polymeric bone substitute that hardens in situ Bone 19 1 1996 S101 S107
17. I.C. Bonzani Synthesis of two-component injectable polyurethanes for bone tissue engineering Biomaterials 28 3 2007 423 433 (Pubitemid 44602225)
18. S.I. Ertel In-vitro study of the intrinsic toxicity of synthetic surfaces to cells J Biomed Mater Res 28 6 1994 667 675 (Pubitemid 24148316)
19. F. Pons Effect of toluene diisocyanate and its corresponding amines on viability and growth of human lung fibroblasts in culture Cell Biol Toxicol 15 5 1999 333 340 (Pubitemid 30233072)
20. P.K. Mishra Isocyanates induces DNA damage, apoptosis, oxidative stress, and inflammation in cultured human lymphocytes J Biochem Mol Toxicol 22 6 2008 429 440
21. J.E. Dumas Synthesis and characterization of an injectable allograft bone/polymer composite bone void filler with tunable mechanical properties Tissue Eng A 16 8 2010 2505 2518
22. Hinrichsen G. Polyurethane handbook. 2nd ed. In: Oertel G, Munich: Hanser Publishers; 1993, 770pp, DM 358, ISBN 3-446-17198-3. Acta Polym 1994;45(5):398.
23. A.L. Silva, and J.C. Bordado Recent developments in polyurethane catalysis: catalytic mechanisms review Catal Rev Sci Eng 46 1 2004 31 51
24. A. Hafeman Injectable biodegradable polyurethane scaffolds with release of platelet-derived growth factor for tissue repair and regeneration Pharm Res 25 10 2008 2387 2399
25. V.P. Hoven Surface-charged chitosan: preparation and protein adsorption Carbohydr Polym 68 1 2007 44 53 (Pubitemid 46210087)
26. S. Li, R. Vatanparast, and H. Lemmetyinen Cross-linking kinetics and swelling behaviour of aliphatic polyurethane Polymer 41 2000 5571 5576 (Pubitemid 30224344)
27. J.J. Guan Biodegradable poly(ether ester urethane)urea elastomers based on poly(ether ester) triblock copolymers and putrescine: synthesis, characterization and cytocompatibility Biomaterials 25 1 2004 85 96
28. S. Parnell, K. Min, and M. Cakmak Kinetic studies of polyurethane polymerization with Raman spectroscopy Polymer 44 2003 5137 5144 (Pubitemid 36975367)
29. G. Ortel Polyurethane handbook 1994 Hanser Gardner Publications Munich
30. S.A. Guelcher Synthesis and in vitro biocompatibility of injectable polyurethane foam scaffolds Tissue Eng 12 5 2006 1247 1259 (Pubitemid 44024495)
31. D.G. Kim Variability of tissue mineral density can determine physiological creep of human vertebral cancellous bone J Biomech 44 9 2011 1660 1665
32. R. Adhikari Biodegradable injectable polyurethanes: synthesis and evaluation for orthopaedic applications Biomaterials 29 28 2008 3762 3770
33. S. Bennett Initial biocompatibility studies of a novel degradable polymeric bone substitute that hardens in situ Bone 19 Suppl. 1 1996 101S 107S (Pubitemid 26254480)
34. M.J. Buckley, and E.J. Beckman Adhesive use in oral and maxillofacial surgery Oral Maxillofac Surg Clin N Am 22 1 2010 195 199
35. J.-Y. Zhang A new peptide-based urethane polymer: synthesis, biodegradation, and potential to support cell growth in vitro Biomaterials 21 2000 1247 1258
36. S.L. Elliott Identification of biodegradation products formed by l-phenylalanine based segmented polyurethaneureas J Biomater Sci Polym Ed 13 6 2002 691 711 (Pubitemid 34851221)
37. I.C. Bonzani Synthesis of two-component injectable polyurethanes for bone tissue engineering Biomaterials 28 2007 423 433 (Pubitemid 44602225)
38. F.S. Steven, and D.S. Jackson Purification and amino acid composition of monomeric and polymeric collagens Biochem J 104 1967 534 536
39. Q.-W. Lu, T.R. Hoye, and C.W. Macosko Reactivity of common functional groups with urethanes: models for reactive compatibilization of thermoplastic polyurethane blends J Polym Sci A: Polym Chem 40 14 2002 2310 2328 (Pubitemid 34745864)
40. M. Szycher Szycher's handbook of polyurethanes 1999 CRC Press Boca Raton, FL
41. A. Kar Pharmaceutical drug analysis 2nd ed. 2005 New Age International Darya Ganj
42. W.F. Neuman, T.Y. Toribara, and B.J. Mulryan The surface chemistry of bone. VII. The hydration shell J Am Chem Soc 75 17 1953 4239 4242
43. B.K. Mann Smooth muscle cell growth in photopolymerized hydrogels with cell adhesive and proteolytically degradable domains: synthetic ECM analogs for tissue engineering Biomaterials 22 22 2001 3045 3051 (Pubitemid 32768712)
44. S.J. Bryant, C.R. Nuttelman, and K.S. Anseth Cytocompatibility of UV and visible light photoinitiating systems on cultured NIH/3T3 fibroblasts in vitro J Biomater Sci Polym Ed 11 5 2000 439 457 (Pubitemid 30420957)
45. I.S. Kim, Y.I. Jeong, and S.H. Kim Self-assembled hydrogel nanoparticles composed of dextran and poly(ethylene glycol) macromer Int J Pharm 205 1/2 2000 109 116
46. M.D. Timmer In vitro cytotoxicity of injectable and biodegradable poly(propylene fumarate)-based networks: unreacted macromers, cross-linked networks, and degradation products Biomacromolecules 4 4 2003 1026 1033 (Pubitemid 36939473)
47. J.P. Fisher, D. Dean, and A.G. Mikos Photocrosslinking characteristics and mechanical properties of diethyl fumarate/poly(propylene fumarate) biomaterials Biomaterials 23 22 2002 4333 4343
48. C.W. Kim Characterization of porous injectable poly-(propylene fumarate)-based bone graft substitute J Biomed Mater Res A 85 4 2008 1114 1119 (Pubitemid 351717981)
49. K.T. Nguyen, and J.L. West Photopolymerizable hydrogels for tissue engineering applications Biomaterials 23 22 2002 4307 4314
50. M.A. Semsarzadeh, and A.H. Navarchian Effects of NCO/OH ratio and catalyst concentration on structure, thermal stability, and crosslink density of poly(urethane-isocyanurate) J Appl Polym Sci 90 4 2003 963 972 (Pubitemid 37126624)
51. K. Gorna, and S. Gogolewski Preparation, degradation, and calcification of biodegradable polyurethane foams for bone graft substitutes J Biomed Mater Res A 67A 3 2003 813 827 (Pubitemid 37521555)
52. R.F. Storey, J.S. Wiggins, and A.D. Puckett Hydrolyzable poly(ester-urethane) networks from l-lysine diisocyanate and d,l-lactide/-caprolactone homo- and copolyester triols J Polym Sci A: Polym Chem 32 12 1994 2345 2363
53. J.E. Dumas Injectable reactive biocomposites for bone healing in critical-size rabbit calvarial defects Biomed Mater 7 2 2012 024112
54. X.J. Loh, K.B. Colin Sng, and J. Li Synthesis and water-swelling of thermo-responsive poly(ester urethane)s containing poly(-caprolactone), poly(ethylene glycol) and poly(propylene glycol) Biomaterials 29 22 2008 3185 3194
55. ISO Biological evaluations of medical devices Tests for in vitro cytotoxicity 2009 ISO Geneva
56. C.W. Kerber, and W. Wong Liquid acrylic adhesive agents in interventional neuroradiology Neurosurg Clin N Am 11 1 2000 85 99 viii-ix (Pubitemid 30017382)
57. H.V. Vinters The histotoxicity of cyanoacrylates. A selective review Neuroradiology 27 4 1985 279 291 (Pubitemid 15030940)
58. J.-Y. Zhang Synthesis, biodegradability, and biocompatibility of lysine diisocyanate-glucose polymers Tissue Eng 8 5 2002 771 785 (Pubitemid 35239755)
59. J.E. Dumas Synthesis of allograft bone/polymer composites and evaluation of remodeling in a rabbit femoral condyle model Acta Biomater 6 2010 2394 2406