Prolonged exposure times of one-step self-etch adhesives on adhesive properties and durability of dentine bonds

Journal of Dentistry

Volumn 40, Issue 12, 2012, Pages 1090-1102

  Hass, Viviane ^a   Luque Martinez, Issis ^a   Sabino, Nilson Biagini ^a   Loguercio, Alessandro D ^a   Reis, Alessandra ^a  

^a STATE UNIVERSITY OF PONTA GROSSA   (Brazil)

Author keywords

Bond strength; Degree of conversion; Dentine bonding agents; Nanoleakage; Polymerization; Raman spectrum analysis

Indexed keywords

1,6 HEXANEDIOL DIMETHACRYLATE; 1,6-HEXANEDIOL DIMETHACRYLATE; 2 HYDROXYETHYL METHACRYLATE; 2-(DIMETHYLAMINO)ETHYL METHACRYLATE; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; CLEARFIL S3 BOND; DENTIN BONDING AGENT; GO SELF ETCHING PRIMER; GO SELF-ETCHING PRIMER; METHACRYLIC ACID DERIVATIVE; METHACRYLIC ACID DIMETHYLAMINOETHYL ESTER; RESIN CEMENT; WATER;

ADHESION; ARTICLE; CHEMISTRY; CLASSIFICATION; DENTAL BONDING; DENTIN; HUMAN; MATERIALS TESTING; MECHANICAL STRESS; POLYMERIZATION; RAMAN SPECTROMETRY; SCANNING ELECTRON MICROSCOPY; SILVER STAINING; SURFACE PROPERTY; TENSILE STRENGTH; TIME; TOOTH DISEASE; ULTRASTRUCTURE;

ADHESIVENESS; BISPHENOL A-GLYCIDYL METHACRYLATE; DENTAL BONDING; DENTAL LEAKAGE; DENTIN; DENTIN-BONDING AGENTS; HUMANS; MATERIALS TESTING; METHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; POLYMERIZATION; RESIN CEMENTS; SILVER STAINING; SPECTRUM ANALYSIS, RAMAN; STRESS, MECHANICAL; SURFACE PROPERTIES; TENSILE STRENGTH; TIME FACTORS; WATER;

EID: 84867863729     PISSN: 03005712     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jdent.2012.09.003     Document Type: Article

References (58)

1. M. Nakabayashi, K. Kojima, and E. Masuhara The promotion of adhesion by the infiltration of monomers into the substrates Journal of Biomedical Materials Research Applied Biomaterials 16 1982 265 273
2. J. Kanca III Resin bonding to wet substrate. 1. Bonding to dentin Quintessence International 23 1992 625 627
3. B. Van Meerbeek, J. De Munck, Y. Yoshida, S. Inoue, M. Vargas, and P. Vijay Buonocore memorial lecture. Adhesion to enamel and dentin: current status and future challenges Operative Dentistry 28 2003 215 235
4. G.C. Martins, A.L. Calixto, O.M.M. Gomes, A.D. Loguercio, P.H.P. D'Alpino, and A. Reis Effect of water storage on resin-dentin bond strengths formed by different bonding approaches Indian Journal of Dental Research 20 2009 431 436
5. C.O. Navarra, M. Cadenaro, B. Codan, A. Mazzoni, V. Sergo, and E. De Stefano Dorigo Degree of conversion and interfacial nanoleakage expression of three one-step self-etch adhesives European Journal of Oral Sciences 117 2009 463 469
6. R.C. Amaral, R. Stanislawczuk, C. Zander-Grande, D. Gagler, A. Reis, and A.D. Loguercio Bond strength and quality of the hybrid layer of one-step self-etch adhesives applied with agitation on dentin Operative Dentistry 35 2010 211 219
7. Y. Shinoda, M. Nakajima, K. Hosaka, M. Otsuki, R.M. Foxton, and J. Tagami Effect of smear layer characteristics on dentin bonding durability of HEMA-free and HEMA-containing one-step self-etch adhesives Dental Materials Journal 30 2011 501 510
8. E.L. Pashley, Y. Zhang, P.E. Lockwood, F.A. Rueggeberg, and D.H. Pashley Effects of HEMA on water evaporation from water-HEMA mixtures Dental Materials 14 1998 6 10
9. C. Yiu, E. Pashley, N. Hiraishi, N. King, C. Goracci, and M. Ferrari Solvent and water retention in dental adhesive blends after evaporation Biomaterials 26 2005 6863 6872
10. M. Cadenaro, L. Breschi, F. Antoniolli, C.O. Navarra, A. Mazzoni, and F.R. Tay Degree of conversion of resin blends in relation to ethanol content and hydrophilicity Dental Materials 24 2008 1194 1200
11. F.R. Tay, D.H. Pashley, B.I. Suh, R.M. Carvalho, and A. Itthagarun Single-step adhesives are permeable membranes Journal of Dentistry 30 2002 371 382
12. M. Cadenaro, F. Antoniolli, S. Sauro, F.R. Tay, R. Di Lenarda, and C. Prati Degree of conversion and permeability of dental adhesives European Journal of Oral Sciences 113 2005 525 530
13. L. Breschi, A. Mazzoni, A. Ruggeri, M. Cadenaro, R. Di Lenarda, and E. De Stefano Dorigo Dental adhesion review: aging and stability of the bonded interface Dental Materials 24 2008 90 101
14. J.H. Bae, B.H. Cho, J.S. Kim, M.S. Kim, I.B. Lee, and H.H. Son Adhesive layer properties as a determinant of dentin bond strength Journal of Biomedical Materials Research Part B: Applied Biomaterials 74 2005 822 828
15. N. Sasaki, K. Okuda, T. Kato, H. Kakishima, H. Okuma, and K. Abe Salivary bisphenol-A levels detected by ELISA after restoration with composite resin Journal of Materials Science: Materials in Medicine 16 2005 297 300
16. M. Hashimoto, S. Fujita, M. Kaga, and Y. Yawaka In vitro durability of one-bottle resin adhesives bonded to dentin Dental Materials 26 2007 677 686
17. S. Torkabadi, M. Nakajima, M. Ikeda, R.M. Foxton, and J. Tagami Bonding durability of HEMA-free and HEMA-containing one-step adhesives to dentine surrounded by bonded enamel Journal of Dentistry 36 2008 80 86
18. R. Walter, E.J.J. Swift, H. Nagaoka, Y. Chung, W. Bartholomew, and K.M. Braswell Two-year bond strengths of "all-in-one" adhesives to dentine Journal of Dentistry 40 2012 549 555
19. L. Breschi, M. Cadenaro, F. Antoniolli, S. Sauro, M. Biasotto, and C. Prati Polymerization kinetics of dental adhesives cured with LED: correlation between extent of conversion and permeability Dental Materials 23 2007 1066 1072
20. A. Reis, S.Q. Ferreira, T.R. Costa, C.A. Klein-Junior, M.M. Meier, and A.D. Loguercio Effects of increased exposure times of simplified etch-and-rinse adhesives on the degradation of resin-dentin bonds and quality of the polymer network European Journal of Oral Sciences 118 2010 502 509
21. A. Santini, and V. Miletic Comparison of the hybrid layer formed by silorane adhesive, one-step self-etch and etch and rinse systems using confocal micro-Raman spectroscopy and SEM Journal of Dentistry 36 2008 683 691
22. V. Miletic, A. Santini, and I. Trkulja Quantification of monomer elution and carbon-carbon double bonds in dental adhesive systems using HPLC and micro-Raman spectroscopy Journal of Dentistry 37 2009 177 184
23. T. Jacobsen, and K. Söderholm Some effects of water on dentin bonding Dental Materials 11 1995 132 136
24. Z. Tarle, A. Meniga, A. Knezevic, J. Sutalo, M. Ristic, and G. Pichler Composite conversion and temperature rise using a conventional, plasma arc, and an experimental blue LED curing unit Journal of Oral Rehabilitation 29 2002 662 667
25. M. Miyazaki, H. Onose, N. Lida, and H. Kazama Determination of residual double bonds in resin-dentin interface by Raman spectroscopy Dental Materials 19 2003 245 251
26. Y. Wang, and P. Spencer Continuing etching of an all-in-one adhesive in wet dentin tubules Journal of Dental Research 84 2005 350 354
27. Z. Tarle, A. Knezevic, N. Demoli, A. Meniga, J. Sutalo, and G. Unterbrink Comparison of composite curing parameters: effects of light source and curing mode on conversion, temperature rise and polymerization shrinkage Operative Dentistry 31 2006 219 226
28. Y. Wang, P. Spencer, and Y. Xiaomei Micro-Raman imaging analysis of monomer/mineral distribuition in intertubular region of adhesive/dentin interfaces Journal of Biomedical Optics 11 2006 24005 24011
29. F.R. Tay, D.H. Pashley, and M. Yoshiyama Two modes of nanoleakage expression in single-step adhesives Journal of Dental Research 81 2002 472 476
30. A. Reis, R.H. Grande, G.M. Oliveira, G.C. Lopes, and A.D. Loguercio A 2-year evaluation of moisture on microtensile bond strength and nanoleakage Dental Materials 23 2007 862 870
31. D.C. Montgomery Design and analysis of experiments 5th ed. 1991 John Wiley & Sons New York
32. I.E. Ruyter Monomer system and polymerization G. Vanherle, D.C. Smith, International symposium on posterior composite resin dental restorative materials 1985 Minnesota Mining & Manufacturing Co. St Paul, MN 109 135
33. A. Peutzfeldt Resin composite in dentistry: the monomer systems European Journal of Oral Sciences 105 1997 97 116
34. F.R. Tay, D.H. Pashley, B.I. Suh, N. Hiraishi, and C.K. Yiu Water treeing in simplified dentin adhesives - déjàvu? Operative Dentistry 2005 30
35. R.M. Carvalho, S. Chersoni, R. Frankenberger, D.H. Pashley, C. Prati, and F.R. Tay A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives Biomaterials 26 2005 1035 1042
36. S.Q. Ferreira, T.R. Costa, C.A. Klein-Junior, M. Accorinte, M.M. Meier, and A.D. Loguercio Improvement of exposure times: effects on adhesive properties and resin-dentin bond strengths of etch-and-rinse adhesives Journal of Adhesive Dentistry 13 2011 235 241
37. S. Guzman-Armstrong, S.R. Armstrong, and F. Qian Relationship between nanoleakage and microtensile bond strength test at the resin-dentin interface Operative Dentistry 28 2003 60 66
38. A.D. Loguercio, A. Reis, and R.Y. Ballester Polymerization shrinkage: effects of constraint and filling technique in composite restorations Dental Materials 20 2004 236 243
39. M. Cenci, F. Demarco, and R.M. de Carvalho Class II composite resin restorations with two polymerization techniques: relationship between microtensile bond strength and marginal leakage Journal of Dentistry 33 2005 603 610
40. P.G. Ding, D. Wolf, T. Pioch, H.J. Staehle, and B. Dannewitz Relationship between microtensile bond strength and nanoleakage at the composite-dentin interface Dental Materials 25 2009 135 141
41. R. Stanislawczuk, R.C. Amaral, C. Zander-Grande, D. Gagler, A. Reis, and A.D. Loguercio Chlorhexidine-containing acid conditioner preserves the longevity of resin-dentin bonds Operative Dentistry 34 2009 481 490
42. Y. Liu, L. Tjaderhane, L. Breschi, A. Mazzoni, N. Li, and J. Mao Limitations in bonding to dentin and experimental strategies to prevent bond degradation Journal of Dental Research 90 2011 953 968
43. Y. Wang, P. Spencer, X. Yao, and Q. Ye Effect of coinitiator and water on the photoreactivity and photopolymerization of HEMA/camphoquinone-based reactant mixtures Journal of Biomedical Materials Research Part A 78 2006 721 728
44. J. Perdigao, M. Dutra-Correa, C.H. Saraceni, M.T. Ciaramicoli, V.H. Kiyan, and C.S. Queiroz Randomized clinical trial of four adhesion strategies: 18-month results Operative Dentistry 37 2012 3 11
45. B.C. Borges, E.J. Souza-Junior, W.C. Brandt, A.D. Loguercio, M.A. Montes, and R.M. Puppin-Rontani Degree of conversion of simplified contemporary adhesive systems as influenced by extended air-activated or passive solvent volatilization modes Operative Dentistry 37 2012 246 252
46. L.F. Schneider, L.M. Cavalcante, S.A. Prahl, C.S. Pfeifer, and J.L. Ferracane Curing efficiency of dental resin composites formulated with camphorquinone or trimethylbenzoyl-diphenyl-phosphine oxide Dental Materials 28 2012 392 397
47. M. Cadenaro, F. Antoniolli, B. Codan, K. Agee, F.R. Tay, and S. Dorigo Ede Influence of different initiators on the degree of conversion of experimental adhesive blends in relation to their hydrophilicity and solvent content Dental Materials 26 2010 288 294
48. M. Kanehira, W.J. Finger, M. Hoffmann, T. Endo, and M. Komatsu Relationship between degree of polymerization and enamel bonding strength with self-etching adhesives Journal of Adhesive Dentistry 8 2006 211 216
49. A.L. Faria-e-Silva, A.F. Lima, R.R. Moraes, E. Piva, and L.R. Martins Degree of conversion of etch-and-rinse and self-etch adhesives light-cured using QTH or LED Operative Dentistry 35 2010 649 654
50. C. Zander-Grande, A.D. Loguercio, R. Stanislawczuk, G.C. Martins, O.M. Gomes, and A. Reis The effect of 6-month water storage on the bond strength of self-etch adhesives bonded to dentin American Journal of Dentistry 24 2011 239 244
51. B.H. Cho, and S.H. Dickens Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength Dental Materials 20 2004 107 115
52. F.A. Rueggeberg, and D.H. Margeson The effect of oxygen inhibition on an unfilled/filled composite system Journal of Dental Research 69 1990 1652 1658
53. A. Reis, V. Grandi, L. Carlotto, G. Bortoli, R. Patzlaff, and L. Rodrigues Accorinte Mde Effect of smear layer thickness and acidity of self-etching solutions on early and long-term bond strength to dentin Journal of Dentistry 33 2005 549 559
54. E. Can Say, M. Nakajima, P. Senawongse, M. Soyman, F. Ozer, and M. Ogata Microtensile bond strength of a filled vs unfilled adhesive to dentin using self-etch and total-etch technique Journal of Dentistry 34 2006 283 291
55. C.O. Navarra, L. Breschi, G. Turco, M. Diolosa, L. Fontanive, and L. Manzoli Degree of conversion of two-step etch-and-rinse adhesives: In situ micro-Raman analysis Journal of Dentistry 40 2012 711 717
56. J. Malacarne, R.M. Carvalho, M.F. de Goes, N. Svizero, D.H. Pashley, and F.R. Tay Water sorption/solubility of dental adhesive resins Dental Materials 22 2006 973 980
57. A.D. Loguercio, R. Stanislawczuk, A. Mena-Serrano, and A. Reis Effect of 3-year water storage on the performance of one-step self-etch adhesives applied actively on dentine Journal of Dentistry 39 2011 578 587
58. A. Reis, M. Albuquerque, M. Pegoraro, G. Mattei, J.R. Bauer, and R.H. Grande Can the durability of one-step self-etch adhesives be improved by double application or by an extra layer of hydrophobic resin? Journal of Dentistry 36 2008 309 315