Bond strength and quality of the hybrid layer of one-step self-etch adhesives applied with agitation on dentin

Operative Dentistry

Volumn 35, Issue 2, 2010, Pages 211-219

  Amaral, R C ^a   Stanislawczuk, R ^b   Zander Grande, C ^b   Gagler, D ^a   Reis, A ^b   Loguercio, A D ^b  

^a UNIVERSIDADE DO OESTE DE SANTA CATARINA   (Brazil)

^b STATE UNIVERSITY OF PONTA GROSSA   (Brazil)

Author keywords

[No Author keywords available]

Indexed keywords

CLEARFIL S3 BOND; DENTIN BONDING AGENT; PROMPT L POP; PROMPT L-POP; RESIN CEMENT; SILVER NITRATE; XENO III;

ARTICLE; CHEMISTRY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL CARE; DENTIN; HUMAN; MATERIALS TESTING; SCANNING ELECTRON MICROSCOPY; TENSILE STRENGTH; ULTRASTRUCTURE; VIBRATION;

ACID ETCHING, DENTAL; DENTAL BONDING; DENTAL STRESS ANALYSIS; DENTIN; DENTIN-BONDING AGENTS; HUMANS; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; RESIN CEMENTS; SILVER NITRATE; TENSILE STRENGTH; VIBRATION;

EID: 77950806761     PISSN: 03617734     EISSN: None     Source Type: Journal    
DOI: 10.2341/09-198-L     Document Type: Article

References (49)

1. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vvjay P, Van Landuyt K, Lambrechts P & Vanherle G (2003) Buonocore Memorial Lecture. Adhesion to enamel and dentin: Current status and future challenges Operative Dentistry 28(3) 215-235.
2. Tay FR & Pashley DH (2003) Have dentin adhesives become too hydrophilic? Journal of the Canadian Dental Association 69(11) 726-731.
3. Perdigao J (2007) New developments in dental adhesion Dental Clinics of North America 51(2) 333-357.
4. Pashley EL, Zhang Y, Lockwood PE, Rueggeberg FA & Pashley DH (1998) Effects of HEMA on water evaporation from water-HEMA mixtures Dental Materials 14(1) 6-10. (Pubitemid 128419482)
5. Ym CK, Pashley EL, Hiraishi N, King NM, Goracci C, Ferrari M, Carvalho RM, Pashley DH & Tay FR (2005) Solvent and water retention in dental adhesive blends after evaporation Biomaterials 26(34) 6863-6872. (Pubitemid 41095510)
6. Pashley EL, Agee KA, Pashley DH & Tay FR (2002) Effects of one versus two applications of an unfilled, all-in-one adhesive on dentine bonding Journal of Dentistry 30(2-3) 83-90.
7. Hotta M, Kondoh K & Kamemizu H (1998) Effect of primers on bonding agent polymerization Journal of Oral Rehabilitation 25(10) 792-799. (Pubitemid 128705373)
8. Cho BH & Dickens SH (2004) Effects of the acetone content of single solution dentin bonding agents on the adhesive layer thickness and the microtensile bond strength Dental Materials 20(2) 107-115.
9. Reis A, Grandi V, Carlotto L, Bortolli G, Patzlaff R, Accorinte MLR & Loguercio AD (2005) Effect of smear layer thickness and acidity of self-etching solutions on early and long-term bond strength to dentin Journal of Dentistry 33(7) 549-559. (Pubitemid 40960999)
10. Jacobsen T & Söderholm KJ (1995) Some effects of water on dentin bonding Dental Materials 11(2) 132-136.
11. Takahashi A, Sato Y, Uno S, Pereira PN & Sano H (2002) Effects of mechanical properties of adhesive resins on bond strength to dentin Dental Materials 18(3) 263-268. (Pubitemid 40072280)
12. Tay FR, Pashley DH & Yoshiyama M (2002) Two modes of nanoleakage expression in single-step adhesives Journal of Dental Research 81(7) 472-476.
13. Watanabe I, Nakabayashi N & Pashley DH (1994) Bonding to ground dentin by a phenyl-P self-etching primer Journal of Dental Research 73(6) 1212-1220.
14. Pashley DH & Tay FR (2001) Aggressiveness of contemporary self-etching adhesives. Part II: Etching effects on unground enamel Dental Materials 17(5) 430-444.
15. Carvalho RM, Chersoni S, Frankenberger R, Pashley DH, Prati C & Tay FR (2005) A challenge to the conventional wisdom that simultaneous etching and resin infiltration always occurs in self-etch adhesives Biomaterials 26(9) 1035-1042. (Pubitemid 39208989)
16. Miyazaki M, Hinoura K, Kanamaru T, Koga K, Iwauchi H & Onose H (1991) Study on light cured composite resin-influence of pretreated procedures for dentin surfaces on shear bond strength to dentin Japanese Journal of Conservative Dentistry 34(3) 734-741.
17. Miyazaki M, Platt JA, Onose H & Moore BK (1996) Influence of dentin primer application methods on dentin bond strength Operative Dentistry 21(4) 167-172. (Pubitemid 126702827)
18. Jacobsen T & Söderholm KJ (1998) Effect of primer solvent, primer agitation, and dentin dryness on shear bond strength to dentin American Journal of Dentistry 11(5) 225-258. (Pubitemid 128505207)
19. DaL-Bianco K, Pellizzaro A, Patzlaft R, de Oliveira Bauer JR, Loguercio AD & Reis A (2006) Effects of moisture degree and rubbing action on the immediate resin-dentin bond strength Dental Materials 22(12) 1150-1156. (Pubitemid 44666163)
20. Chan KM, Tay FR, King NM, Imazato S & Pashley DH (2003) Bonding of mild self-etching primers/adhesives to dentin with thick smear layers American Journal of Dentistry 16(5) 340-346. (Pubitemid 41310053)
21. Velasquez LM, Sergent RS, Burgess JO & Mercante DE (2006) Effect of placement agitation and placement time on the shear bond strength of three self-etching adhesives Operative Dentistry 31(4) 426-430. (Pubitemid 44276630)
22. Reis A, Pellizzaro A, Dai-Bianco K, Gones OM, Patzlaff R & Loguercio AD (2007) Impact of adhesive application to wet and dry dentin on long-term resin-dentin bond strengths Operative Dentistry 32(4) 380-387.
23. Montgomery DC (1991) Design and Analysis of Experiments Ed 5 New York John Wiley & Sons.
24. Yoshiyama M, Carvalho RM, Sano H, Horner J, Brewer PD & Pashley DH (1995) Interfacial morphology and strength of bonds made to superficial versus deep dentin American Journal of Dentistry 8(6) 297-302.
25. Furukawa M, Shigetani Y, Finger WJ, Hoffmann M, Kanehira M, Endo T & Komatsu M (2008) All-in-one selfetch model adhesives: HEMA-free and without phase separation Journal of Dentistry 36(6) 402-408.
26. Van Landuyt KL, De Munck J, Snauwaert J, Coutinho E, Poitevin A, Yoshida Y, Inoue S, Peumans M, Suzuki K, Lambrechts P & Van Meerbeek B (2005) Monomer-solvent phase separation in one-step self-etch adhesives Journal of Dental Research 84(2) 183-188. (Pubitemid 43822053)
27. Chersoni S, Suppa P, Grandini S, Goracci C, Monticelli F, Yiu C, Huang C, Prati C, Breschi L, Ferrari M, Pashley DH & Tay FR (2004) In vivo and in vitro permeability of one-step self-etch adhesives Journal of Dental Research 83(6) 459-464. (Pubitemid 41756840)
28. Tay FR, Pashley DH, Suh B, Carvalho R & Miller M (2004) Single-step, self-etch adhesives behave as permeable membranes after polymerization. Part I. Bond strength and morphologic evidence American Journal of Dentistry 17(4) 271-278. (Pubitemid 41310001)
29. Tay FR, Pashley DH, Garcia-Godoy F & Tm CK (2004) Single-step, self-etch adhesives behave as permeable membranes after polymerization. Part II. Silver tracer penetration evidence American Journal of Dentistry 17(5) 315-322.
30. Li H, Burrow MF & Tyas MJ (2003) The effect of concentration and pH of silver nitrate solution on nanoleakage Journal of Adhesive Dentistry 5(1) 19-25. (Pubitemid 37158048)
31. Li H, Burrow MF & Tyas MJ (2000) Nanoleakage patterns of four dentin-bonding systems Dental Materials 16(1) 48-56.
32. de Gee AJ, ten Harkel-Hagenaar E & Davidson CL (1984) Color dye for identification of incompletely cured composite resins Journal of Prosthetic Dentistry 52(5) 626-631.
33. Tay FR, King NM, Chan KM & Pashley DH (2002) How can nanoleakage occur in self-etching adhesive systems that demineralize and infiltrate simultaneously? Journal of Adhesive Dentistry 4(4) 255-269.
34. Shinkai K, Suzuki S & Katoh Y (2006) Effect of air-blowing variables on bond strength of all-in-one adhesives to bovine dentin Dental Materials Journal 25(4) 664-668.
35. Spreafico D, Semeraro S, Mezzanzanica D, Re D, Gagliani M, Tanaka T, Sano H & Sidhu SR (2006) The effect of the airblowing step on the technique sensitivity of four different adhesive systems Journal of Dentistry 34(3) 237-244. (Pubitemid 43199804)
36. Ikeda T, De Munck J, Shirai K, Hikita K, Inoue S, Sano H, Lambrechts P & Van Meerbeek M (2008) Effect of air-drying and solvent evaporation on the strength of HEMA-rich versus HEMA-free one-step adhesives Dental Materials 24(10) 1316-1323.
37. Rueggeberg FA & Margeson DH (1990) The effect of oxygen inhibition on an unfilled/filled composite system Journal of Dental Research 69(10) 1652-1658.
38. Nunes TG, Garcia FC, Osório R, Carvalho R & Toledano M (2006) Polymerization efficacy of simplified adhesive systems studied by NMR and MRI techniques Dental Materials 22(10) 963-972. (Pubitemid 44301468)
39. Hiraishi N, Breschi L, Prati C, Ferrari M, Tagami J & King NM (2007) Technique sensitivity associated with air-drying of HEMA-free, single-bottle, one-step self-etch adhesives Dental Materials 23(4) 498-505. (Pubitemid 46281291)
40. Ding PGF, Wolff D, Pioch T, Staehle HJ & Dannewitz B (2009) Relationship between microtensile bond strength and nanoleakage at the composite-dentin interface Dental Materials 25(1) 135-141.
41. Kalachandra S & Turner DT (1987) Water sorption of polymethacrylate networks: bis-GMA/TEGDM copolymers Journal of Biomedical Materials Research 21(3) 329-338. (Pubitemid 17016192)
42. Ito S, Hashimoto M, Wadgaonkar B, Svizero N, Carvalho RM, Yiu C, Rueggeberg FA, Foulger S, Saito T, Nishitani Y, Yoshiyama M, Tay FR & Pashley DH (2005) Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity Biomaterials 26(33) 6449-6459. (Pubitemid 41021740)
43. Malacarne J, Carvalho RM, de Goes MF, Svizero N, Pashley DH, Tay FR, Yiu CR & Carrilho MR (2006) Water sorption/solubility of dental adhesive resins Dental Materials 22(10) 973-980. (Pubitemid 44313991)
44. Tay FR, Sano H, Carvalho R, Pashley EL & Pashley DH (2000) An ultrastructural study of the influence of acidity of self-etching primers and smear layer thickness on bonding to intact dentin Journal of Adhesive Dentistry 2(2) 83-98.
45. Tay FR, Suh BI, Pashley DH, Prati C, Chuang SF & Li F (2003) Factors contributing to the incompatibility between simplified-step adhesives and self-cured or dual-cured composites. Part II. Single-bottle, total-etch adhesive Journal of Adhesive Dentistry 5(2) 91-105. (Pubitemid 37158220)
46. Sadek FT, Goracci C, Cardoso PE, Tay FR & Ferrari M (2005) Microtensile bond strength of current dentin adhesives measured immediately and 24 hours after application Journal of Adhesive Dentistry 7(4) 297-302. (Pubitemid 43048581)
47. Reis A, Loguercio AD, Azevedo CL, de Carvalho RM, da Julio Singer M & Grande RH (2003) Moisture spectrum of demineralized dentin for adhesive systems with different solvent bases Journal of Adhesive Dentistry 5(3) 183-192. (Pubitemid 37386821)
48. Bouillaguet S, Ciucchi B, Jacoby T, Wataha JC & Pashley D (2001) Bonding characteristics to dentin walls of Class II cavities, in vitro Dental Materials 17(4) 316-321. (Pubitemid 33649498)
49. Pashley DH, Carvalho RM, Sano H, Nakajima M, Yoshiyama M, Shono Y, Fernandes CA & Tay FR (1999) The microtensile bond test: A review Journal of Adhesive Dentistry 1(4) 299-309.