A 2-year evaluation of moisture on microtensile bond strength and nanoleakage

Dental Materials

Volumn 23, Issue 7, 2007, Pages 862-870

  Reis, A ^a   Grande, R H M ^b   Oliveira, G M S ^c   Lopes, G C ^c   Loguercio, A D ^a  

^a UNIVERSIDADE DO OESTE DE SANTA CATARINA   (Brazil)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

^c FEDERAL UNIVERSITY OF SANTA CATARINA   (Brazil)

Author keywords

Adhesive systems; Degradation; EDX SEM; Microtensile bond strength; Moisture degree

Indexed keywords

ADHESIVES; DEGRADATION; MOISTURE; RESINS; SILVER COMPOUNDS; SURFACE TREATMENT;

ADHESIVE SYSTEMS; EDX-SEM; MICROTENSILE BOND STRENGTH; MOISTURE DEGREE;

BOND STRENGTH (MATERIALS);

BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; DENTIN BONDING AGENT; METHACRYLIC ACID DERIVATIVE; ONE STEP DENTIN BONDING SYSTEM; ONE-STEP DENTIN BONDING SYSTEM; RESIN CEMENT; SILVER NITRATE; SINGLE BOND; SYNTAC DENTINE ADHESIVE; UNCLASSIFIED DRUG; WATER;

ABSORPTION; ANALYSIS OF VARIANCE; ARTICLE; CHEMISTRY; COMPARATIVE STUDY; DENTAL BONDING; DENTAL CARE; DENTIN; ELECTRON PROBE MICROANALYSIS; HUMAN; MOLAR TOOTH; REGRESSION ANALYSIS; TENSILE STRENGTH; TIME; TOOTH DISEASE; TOOTH PERMEABILITY;

ABSORPTION; ANALYSIS OF VARIANCE; BISPHENOL A-GLYCIDYL METHACRYLATE; DENTAL BONDING; DENTAL LEAKAGE; DENTAL STRESS ANALYSIS; DENTIN; DENTIN PERMEABILITY; DENTIN-BONDING AGENTS; ELECTRON PROBE MICROANALYSIS; HUMANS; METHACRYLATES; MOLAR, THIRD; REGRESSION ANALYSIS; RESIN CEMENTS; SILVER NITRATE; TENSILE STRENGTH; TIME FACTORS; WATER;

EID: 34248388179     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2006.05.005     Document Type: Article

References (49)

1. Jacobsen T., and Söderholm K.J. Effects of primer solvent, primer agitation, and dentin dryness on shear bond strength to dentin. Am J Dent 11 (1998) 225-228
2. Van Meerbeek B., Yoshida Y., Lambrechts P., Vanherle G., Duke E.S., Eick J.D., et al. A TEM study of two water-based adhesive systems bonded to dry and wet dentin. J Dent Res 77 (1998) 50-59
3. Reis A., Loguercio A.D., Azevedo C.L.N., Carvalho R.M., Singer J.M., and Grande R.H.M. Moisture spectrum of demineralized dentin for different solvent-based adhesive system. J Adhes Dent 5 (2003) 183-192
4. Nakajima M., Kanemura N., Pereira P.N.R., Tagami J., and Pashley D.H. Comparative microtensile bond strength and SEM analysis of bonding to wet and dry dentin. Am J Dent 13 (2000) 324-328
5. Tay F.R., Gwinnett J.A., and Wei S.H. Relation between water content in acetone/alcohol-based primer and interfacial ultrastructure. J Dent 26 (1998) 147-156
6. Tay F.R., Gwinnett J.A., and Wei S.H. The overwet phenomenon: a transmission electron microscopic study of surface moisture in the acid-conditioned, resin-dentin interface. Am J Dent 9 (1996) 161-166
7. DeMunck J., Van Meerbeek B., Yoshida Y., Inoue S., Vargas M., Suzuki K., et al. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 82 (2003) 136-140
8. Koshiro K., Inoue S., Tanaka T., Koase K., Fujita M., Hashimoto M., et al. In vivo degradation of resin-dentin bonds produced by a self-etch vs. a total-etch adhesive system. Eur J Oral Sci 112 (2004) 368-375
9. Frankenberger R., Strobel W., Lohbauer U., Krämer N., and Petschelt A. The effect of six years of water storage on resin composite bonding to human dentin. J Biomed Mater Res Part B: Appl Biomater 69B (2004) 25-32
10. Reis A., Grandi V., Carlotto L., Bortoli G., Patzlaff R., Accorinte M.L.R., et al. Effect of smear layer thickness and acidity of self-etching solutions on early and long-term bond strength to dentin. J Dent 33 (2005) 549-559
11. Loguercio A.D., Uceda-Gomez N., de Oliveira Carrilho M.R., and Reis A. Influence of specimen size and regional variation on long-term resin-dentin bond strength. Dent Mater 21 (2005) 224-231
12. Hashimoto M., Ohno H., Kaga M., Sano H., Endo K., and Oguchi H. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 79 (2000) 1385-1391
13. Sano H., Yoshikawa T., Pereira P.N.R., Kanemura N., Morigami M., Tagami J., et al. Long-term durability of dentin bonds made with a self-etching primer, in vivo. J Dent Res 78 (1999) 906-911
14. Carrilho M.R.O.M.R., Tay F.R., Pashley D.H., Tjaderhane L., and Carvalho R.M. Mechanical stability of resin-dentin bond components. Dent Mater 21 (2005) 232-241
15. Reis A., Loguercio A.D., Carvalho R.M., and Grande R.H.M. Durability of resin dentin interfaces: effects of surface moisture and adhesive solvent component. Dent Mater 20 (2004) 669-676
16. Paul S.J., Leach M., Rueggeberg F.A., and Pashley D.H. Effect of water content on the physical properties of model dentine primer and bonding resins. J Dent 27 (1999) 209-214
17. Okuda M., Pereira P.N., Nakajima M., Tagami J., and Pashley D.H. Long-term durability of resin dentin interface: nanoleakage vs. microtensile bond strength. Oper Dent 27 (2002) 289-296
18. Li H., Burrow M.F., and Tyas M.J. The effect of load cycling on the nanoleakage of dentin bonding systems. Dent Mater 18 (2002) 111-119
19. Hashimoto M., De Munck J., Ito S., Sano H., Kaga M., Oguchi H., et al. In vitro effect of nanoleakage expression on resin-dentin bond strengths analyzed by microtensile bond test, SEM/EDX and TEM. Biomaterials 25 (2004) 5565-5574
20. De Wald J.P. The use of extracted teeth for in vitro bonding studies: a review of infection control considerations. Dent Mater 13 (1997) 74-81
21. Asmussen E., and Peutzfeldt A. The influence of relative humidity on the effect of dentin bonding systems. J Adhes Dent 3 (2001) 123-127
22. Burrow M.F., Sato H.M., and Tagami J. Dentin bonding durability after three years using a dentin bonding agent with and without priming. Dent Mater 12 (1996) 302-307
23. Kitasako Y., Burrow M.F., Nikaido T., and Tagami J. The influence of storage on dentin bond durability of resin cement. Dent Mater 16 (2000) 1-16
24. Tay F.R., Pashley D.H., and Yoshiyama M. Two modes of nanoleakage expression in single-step adhesives. J Dent Res 81 (2002) 472-476
25. Pashley D.H., Agee K.A., Nakajima M., Tay F.R., Carvalho R.M., Terada R.S., et al. Solvent-induced dimensional changes in EDTA-demineralized dentin matrix. J Biomed Mater Res 56 (2001) 273-281
26. Maciel K.T., Carvalho R.M., Ringle R.D., Preston C.D., Russel C.M., and Pashley D.H. The effects of acetone, ethanol, HEMA, and air on the stiffness of human decalcified dentin matrix. J Dent Res 11 (1996) 1851-1858
27. Pashey D.H., Carvalho R.M., Tay F.R., Agee K.A., and Lee K.W. Solvation of dried dentin matrix by water and other polar solvents. Am J Dent 15 (2002) 97-102
28. Hashimoto M., Ohno H., Kaga M., Sano H., Endo K., and Oguchi H. Extent to which resin can infiltrate dentin by acetone-based adhesives. J Dent Res 81 (2002) 74-78
29. Pashley E.L., Zhang Y., Lockwood P.E., Rueggeberg F.A., and Pashley D.H. Effects of HEMA on water evaporation from water-HEMA mixtures. Dent Mater 14 (1998) 6-10
30. Jacobsen T., and Söderholm K.J. Some effects of water on dentin bonding. Dent Mater 11 (1995) 132-136
31. Wieliczka D.M., Kruger M.B., and Spencer P. Raman imaging of dental adhesive diffusion. Appl Spectrosc 51 (1997) 1593-1596
32. Spencer P., and Swafford J.R. Unprotected protein at the dentin-adhesive interface. Quintessence Int 30 (1999) 501-507
33. Spencer P., and Wang Y. Adhesive phase separation at the dentin interface under wet bonding conditions. J Biomed mater Res 62 (2002) 447-456
34. Spencer P., Wang Y., Walker M.P., Wieliczka D.M., and Swafford J.R. Interfacial chemistry of the dentin/adhesive bond. J Dent Res 79 (2000) 1458-1463
35. Miyasaki M., Onose H., and Moore B.K. Analysis of the dentin-resin interface by use of laser Raman spectroscopy. Dent Mater 18 (2002) 576-580
36. Hashimoto M., Ohno H., Sano H., Kaga M., and Oguchi H. In vitro degradation of resin-dentin bonds analyzed by microtensile bond test, scanning and transmission electron microscopy. Biomaterials 24 (2003) 3795-3803
37. Hashimoto M., Ohno H., Sano H., Kaga M., and Oguchi H. Degradation patterns of different adhesives and bonding procedures. J Biomed Mater Res B: Appl Biomater 66 (2003) 324-330
38. Pashley D.H., Ciucchi B., Sano H., Carvalho R.M., and Russell C.M. Bond strength versus dentine structure: a modelling approach. Arch Oral Biol 40 (1995) 1109-1118
39. Takahashi A., Sato Y., Uno S., Pereira P.N.R., and Sano H. Effects of mechanical properties of adhesives on bond strength to dentin. Dent Mater 18 (2002) 263-268
40. Okuda M., Pereira P.N.R., Najakima M., and Tagami J. Relationship between nanoleakage and long-term durability of dentin bonds. Oper Dent 26 (2001) 482-490
41. Tay F.R., and Pashley D.H. Water treeing-a potential mechanism for degradation of dentin adhesives. Am J Dent 16 (2003) 6-12
42. Tay F.R., Frankenberger R., Krejci I., Bouillaguet S., Pashley D.H., Carvalho R.M., et al. Single-bottle adhesives behave as permeable membranes after polymerization. I. In vivo evidence. J Dent 32 (2004) 611-621
43. Li H.P., Burrow M.F., and Tyas M.J. The effect of long-term storage on nanoleakage. Oper Dent 26 (2001) 609-616
44. Guzman-Ruiz S., Armstrong S.R., Cobb D.S., and Vargas M.A. Association between microtensile bond strength and leakage in the indirect resin composite/dentin adhesively bonded joint. J Dent 29 (2001) 145-153
45. Pereira P.N., Okuda M., Nakajima M., Sano H., Tagami J., and Pashley D.H. Relationship between bond strengths and nanoleakage: evaluation of a new assessment method. Am J Dent 14 (2001) 100-104
46. Loguercio A.D., Reis A., and Ballester R.Y. Polymerization shrinkage: effects of constraint and filling technique in composite restorations. Dent Mater 20 (2004) 236-243
47. Kenshima S., Reis A., Uceda-Gomez N., Tancredo L.L.F., Filho L.E., Nogueira F.N., et al. Effect of smear layer thickness and pH of self-etching adhesive systems on the bond strength and gap formation to dentin. J Adhes Dent 7 (2005) 117-126
48. Cenci M.S., Demarco F.F., and Carvalho R.M. Class II composite resin restorations with two polymerization techniques: relationship between microtensile bond strength and marginal leakage. J Dent 33 (2005) 603-610
49. Yiu C.K., King N.M., Pashley D.H., Suh B.I., Carvalho R.M., Carrilho M.R., et al. Effect of resin hydrophilicity and water storage on resin strength. Biomaterials 25 (2004) 5789-5796