Polymer coating of carrier excipients modify aerosol performance of adhered drugs used in dry powder inhalation therapy

International Journal of Pharmaceutics

Volumn 438, Issue 1-2, 2012, Pages 150-159

  Traini, Daniela ^a,b   Scalia, Santo ^d   Adi, Handoko ^c   Marangoni, Elisabetta ^d   Young, Paul M ^a,b  

^a WOOLCOCK INSTITUTE OF MEDICAL RESEARCH   (Australia)

^b UNIVERSITY OF SYDNEY   (Australia)

^c UNIVERSITY OF SYDNEY   (Australia)

^d UNIVERSITY OF FERRARA   (Italy)

Author keywords

Coating; Dry powder inhaler (DPI); Ethyl cellulose; Lactose; Polyvinylpyrrolidone; Salbutamol sulphate

Indexed keywords

ETHYL CELLULOSE; LACTOSE; POVIDONE; SALBUTAMOL SULFATE;

AEROSOL; ARTICLE; CONTACT ANGLE; CONTROLLED STUDY; DRUG COATING; DRUG STORAGE; DRUG STRUCTURE; GONIOMETRY; MORPHOLOGY; PARTICLE SIZE; POWDER INHALER; PRIORITY JOURNAL; SPRAY DRYING; STATIC ELECTRICITY; SURFACE CHARGE; SURFACE PROPERTY;

ADMINISTRATION, INHALATION; ADSORPTION; AEROSOLS; CELLULOSE; DRUG CARRIERS; DRY POWDER INHALERS; EXCIPIENTS; LACTOSE; PARTICLE SIZE; PHARMACEUTICAL PREPARATIONS; POVIDONE; SURFACE PROPERTIES;

EID: 84867400756     PISSN: 03785173     EISSN: 18733476     Source Type: Journal    
DOI: 10.1016/j.ijpharm.2012.08.036     Document Type: Article

References (68)

1. H. Adi, I. Larson, H. Chiou, P. Young, D. Traini, and P. Stewart Role of agglomeration in the dispersion of salmeterol xinafoate from mixtures for inhalation with differing drug to fine lactose ratios J. Pharm. Sci. 97 2008 3140 3152
2. H. Adi, D. Traini, H.K. Chan, and P.M. Young The influence of drug morphology on aerosolisation efficiency of dry powder inhaler formulations J. Pharm. Sci. 97 2008 2780 2788
3. S. Adi, H. Adi, P. Tang, D. Traini, H.K. Chan, and P.M. Young Micro-particle corrugation, adhesion and inhalation aerosol efficiency Eur. J. Pharm. Sci. 35 2008 12 18
4. J. Barra, F. Lescure, F. Falson-Rieg, and E. Doelker Can the organization of a binary mix be predicted from the surface energy, cohesion parameter and particle size of its components? Pharmaceut. Res. 15 1998 1727 1736
5. W. Bergfeld, D. Belsito, W. Carlton, C. Klaassen, A. Schroeter, R. Shank, and T. Slaga Final report on the safety assessment of polyvinylpyrrolidone (PVP) Int. J. Toxicol. 17 1998 95 130
6. G. Buckton, and B. Chandraia Consideration of adhesion to modified container walls, by use of surface energy and polarity data, and Lewis acid-Lewis base interactions Int. J. Pharm. 94 1993 223 229
7. F. Buttini, P. Colombo, M.P. Wenger, P. Mesquida, C. Marriott, and S.A. Jones Back to basics: the development of a simple, homogenous, two-component dry-powder inhaler formulation for the delivery of budesonide using miscible vinyl polymers J. Pharm. Sci. 97 2008 1257 1267
8. P.R. Byron, J. Peart, and J.N. Staniforth Aerosol electrostatics. I: Properties of fine powders before and after aerosolization by dry powder inhalers Pharm. Res. 14 1997 698 705
9. P.A. Carter, O.E. Cassidy, G. Rowley, and D.R. Merrifield Triboelectrification of fractionated crystalline and spray-dried lactose Pharm. Pharmacol. Commun. 4 1998 111 115
10. N.Y. Chew, and H.K. Chan Use of solid corrugated particles to enhance powder aerosol performance Pharm. Res. 18 2001 1570 1577
11. K.T. Chow, K. Zhu, R.B. Tan, and P.W. Heng Investigation of electrostatic behavior of a lactose carrier for dry powder inhalers Pharm. Res. 25 2008 2822 2834
12. D. Cline, and R. Dalby Predicting the quality of powders for inhalation from surface energy and area Pharmaceut. Res. 19 2002 1274 1277
13. A.H. de Boer, P. Hagedoorn, D. Gjaltema, J. Goede, K.D. Kussendrager, and H.W. Frijlink Air classifier technology (ACT) in dry powder inhalation. Part II. The effect of lactose carrier surface properties on the drug-to-carrier interaction in adhesive mixtures for inhalation Int. J. Pharmaceut. 260 2003 201 216
14. E. Doelker Cellulose derivatives Adv. Polym. Sci. 107 1993 199 265
15. M.J. Donovan, and H.D.C. Smyth Influence of size and surface roughness of large lactose carrier particles in dry powder inhaler formulations Int. J. Pharmaceut. 402 2010 1 9
16. A. Elajnaf, and P.G.R. Carter The effect of relative humidity on electrostatic charge decay of drugs and excipient used in dry powder inhaler formulation Drug Dev. Ind. Pharm. 33 2007 961 974
17. F. Ferrari, D. Cocconi, R. Bettini, F. Giordano, P. Santi, M. Tobyn, R. Price, P. Young, C. Caramella, and P. Colombo The surface roughness of lactose particles can be modulated by wet-smoothing using a high-shear mixer AAPS PharmSciTech 5 2004 69 74
18. F. Ferrari, D. Cocconi, R. Bettini, F. Giordano, P. Santi, M.J. Tobyn, R. Price, P. Young, C.J. Fiegel, J. Fu, and J. Hanes Poly(ether-anhydride) dry powder aerosols for sustained drug delivery in the lungs J. Control. Release 96 2004 411 423
19. Y. Fukumori, H. Ichikawa, Y. Yamaoka, E. Akaho, Y. Takeuchi, T. Fukuda, R. Kanamori, and Y. Osako Effect of additives on physical-properties of fine ethyl cellulose microcapsules prepared by the Wurster process Chem. Pharm. Bull. 39 1991 164 169
20. Y. Fukumori, H. Ichikawa, Y. Yamaoka, E. Akaho, Y. Takeuchi, T. Fukuda, R. Kanamori, and Y. Osako Microgranulation and encapsulation of pulverized pharmaceutical powders with ethyl cellulose by the Wurster process Chem. Pharm. Bull. 39 1991 1806 1812
21. R.J. Good Contact-angle, adhesion and wetting - a critical-review Abstr. Pap. Am. Chem. Soc. 1992 203 2-COLL
22. S. Hoe, D. Traini, H.K. Chan, and P.M. Young Measuring charge and mass distributions in dry powder inhalers using the electrical next generation impactor (eNGI) Eur. J. Pharm. Sci. 38 2009 88 94
23. S. Hoe, D. Traini, H.K. Chan, and P.M. Young The contribution of different formulation components on the aerosol charge in carrier-based dry powder inhaler systems Pharmaceut. Res. 27 2010 1325 1336
24. S. Hoe, P.M. Young, and D. Traini Dynamic electrostatic charge of lactose-salbutamol sulphate powder blends dispersed from a Cyclohaler((R)) Drug Dev. Ind. Pharm. 37 2011 1365 1375
25. K. Iida, Y. Hayakawa, H. Okamoto, K. Danjo, and H. Leuenberger Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulphate Chem. Pharm. Bull. 51 2003 1455 1457
26. K. Iida, Y. Hayakawa, H. Okamoto, K. Danjo, and H. Leuenberger Effect of surface layering time of lactose carrier particles on dry powder inhalation properties of salbutamol sulphate Chem. Pharm. Bull. 2004 52
27. K. Iida, H. Todo, H. Okamoto, K. Danjo, and H. Leuenberger Preparation of dry powder inhalation with lactose carrier particles surface-coated using a Wurster fluidized bed Chem. Pharm. Bull. 53 2005 431 434
28. J. James, B. Crean, M. Davies, R. Toon, P. Jinks, and C.J. Roberts The surface characterisation and comparison of two potential sub-micron, sugar bulking excipients for use in low-dose, suspension formulations in metered dose inhalers Int. J. Pharmaceut. 361 2008 209 221
29. B.A. Johnson, and G. Zografi Adhesion of hydroxypropyl cellulose films to low energy solid substrates J. Pharm. Sci. 75 1986 529 533
30. S.A. Jones, G.P. Martin, and M.B. Brown Manipulation of beclomethasone-hydrofluoroalkane interactions using biocompatible macromolecules J. Pharm. Sci. 95 2006 1060 1074
31. M. Kumon, S. Machida, M. Suzuki, A. Kusai, E. Yonemochi, and K. Terada Application and mechanism of inhalation profile improvement of DPI formulations by mechanofusion with magnesium stearate Chem. Pharm. Bull. 56 2008 617 625
32. M. Kumon, M. Suzuki, A. Kusai, E. Yonemochi, and K. Terada Novel approach to DPI carrier lactose with mechanofusion process with additives and evaluation by IGC Chem. Pharm. Bull. 54 2006 1508 1514
33. H.Y. Li, P.C. Seville, I.J. Williamson, and J.C. Birchall The use of amino acids to enhance the aerosolisation of spray-dried powders for pulmonary gene therapy J. Gene Med. 7 2005 343 353
34. S.Y. Lin, and Y.H. Kao Tablet formulation study of spray-dried sodium diclofenac enteric-coated microcapsules Pharmaceut. Res. 8 1991 919 924
35. P. Lucas, K. Anderson, U.J. Potter, and J.N. Staniforth Enhancement of small particle size dry powder aerosol formulations using an ultra low density additive Pharm. Res. 16 1999 1643 1647
36. D.A.V. Morton, Q. Zhou, L. Qu, I. Larson, and P.J. Stewart Effect of mechanical dry particle coating on the improvement of powder flowability for lactose monohydrate: a model cohesive pharmaceutical powder Powder Technol. 207 2011 414 421
37. M. Murtomaa, M. Savolainen, L. Christiansen, J. Rantanen, and E.J.Y. Laine Static electrification of powders during spray drying J. Electrostat. 62 2004 63 72
38. J. Ooi, D. Traini, S. Hoe, W. Wong, and P.M. Young Does carrier size matter?. A fundamental study of drug aerosolisation from carrier based dry powder inhalation systems Int. J. Pharm. 413 2011 1 9
39. Pharmacopoeia, U.S., 2008. NF-26.
40. G. Pilcer, T. Sebti, and K. Amighi Formulation and characterization of lipid-coated tobramycin particles for dry powder inhalation Pharmaceut. Res. 23 2006 931 940
41. M. Rillosi, and G. Buckton Modelling mucoadhesion by use of surface energy terms obtained from the Lewis acid-Lewis base approach. II. Studies on anionic, cationic, and unionisable polymers Pharmaceut. Res. 12 1995 669 675
42. R.C. Rowe The adhesion of film coatings to tablet surfaces - the effect of some direct compression excipients and lubricants J. Pharm. Pharmacol. 29 1977 723 726
43. R.C. Rowe The adhesion of film coatings to tablet surfaces - a problem of stress distribution J. Pharm. Pharmacol. 33 1981 610 612
44. P. Sakellariou, and R.C. Rowe Interactions in cellulose derivative films for oral drug delivery Prog. Polym. Sci. 20 1995 889 942
45. P.J. Sheskey, R.C. Rowe, and M.E. Quinn 6th ed. P.P.a.A.P. Association, Handbook of Pharmaceutical Excipients 2009 Pharmaceutical Press London, UK
46. H.D.C. Smyth, and A.J. Hickey Carriers in drug powder delivery: implications for inhalation system design Am. J. Drug Deliv. 3 2005 117 132
47. P.J. Stewart, M.D. Louey, and S. Razia Influence of physico-chemical carrier properties on the in vitro aerosol deposition from interactive mixtures Int. J. Pharmaceut. 252 2003 87 98
48. H. Takenaka, Y. Kawashima, and S.Y. Lin Preparation of enteric-coated microcapsules for tableting by spray-drying technique and in vitro simulation of drug release from the tablet in GI tract J. Pharm. Sci. 69 1980 1388 1392
49. H. Takenaka, Y. Kawashima, and S.Y. Lin Spray-drying agglomeration.10. Polymorphism of spray-dried microencapsulated sulfamethoxazole with cellulose-acetate phthalate and colloidal silica, montmorillonite, or talc J. Pharm. Sci. 70 1981 1256 1260
50. R.B.H. Tan, S.Y. Xie, S.K. Poornachary, and P.S. Chow Direct precipitation of micron-size salbutamol sulfate: new insights into the action of surfactants and polymeric additives Cryst. Growth Des. 10 2010 3363 3371
51. D. Traini, P.M. Young, M. Jones, S. Edge, and R. Price Comparative study of erythritol and lactose monohydrate as carriers for inhalation: atomic force microscopy and in vitro correlation Eur. J. Pharm. Sci. 27 2006 243 251
52. D. Traini, P.M. Young, F. Thielmann, and M. Acharya The influence of lactose pseudopolymorphic form on salbutamol sulfate-lactose interactions in DPI formulations Drug Dev. Ind. Pharm. 34 2008 992 1001
53. M.J. Traynor, Y. Zhao, M.B. Brown, and S.A. Jones Vinyl polymer-coated lorazepam particles for drug delivery to the airways Int. J. Pharmaceut. 410 2011 9 16
54. C.J. van Oss Interfacial Forces in Aqueous Media 1994 Marcel Dekker New York, U.S.A.
55. R. Vehring Pharmaceutical particle engineering via spray drying Pharmaceut. Res. 25 2008 999 1022
56. P. Vera, V. Gallardo, C. Salcedo, and A.V. Delgado Colloidal stability of a pharmaceutical latex: experimental determinations and theoretical predictions J. Colloid Interf. Sci. 177 1996 553 560
57. S. Vijayasekaran, T.V. Chirila, Y. Hong, S.G. Tahija, P.D. Dalton, I.J. Constable, and I.L. McAllister Poly(1-vinyl-2-pyrrolidinone) hydrogels as vitreous substitutes: histopathological evaluation in the animal eye J. Biomater. Sci. Polym. Ed. 7 1996 685 696
58. L.S.C. Wan, P.W.S. Heng, and C.G.H. Chia Spray drying as a process for microencapsulation and the effect of different coating polymers Drug Dev. Ind. Pharm. 18 1992 997 1011
59. P.M. Young, D. Cocconi, P. Colombo, R. Bettini, R. Price, D.F. Steele, and M.J. Tobyn Characterization of a surface modified dry powder inhalation carrier prepared by particle smoothing J. Pharm. Pharmacol. 54 2002 1339 1344
60. P.M. Young, P. Kwok, H. Adi, H.K. Chan, and D. Traini Lactose composite carriers for respiratory delivery Pharm. Res. 26 2009 802 810
61. P.M. Young, R. Price, M.J. Tobyn, M. Buttrum, and F. Dey Investigation into the effect of humidity on drug-drug interactions using the atomic force microscope J. Pharm. Sci. 92 2003 815 822
62. P.M. Young, R. Price, M.J. Tobyn, M. Buttrum, and F. Dey The influence of relative humidity on the cohesion properties of micronized drugs used in inhalation therapy J. Pharm. Sci. 93 2004 753 761
63. P.M. Young, A. Sung, D. Traini, P. Kwok, H. Chiou, and H.K. Chan Influence of humidity on the electrostatic charge and aerosol performance of dry powder inhaler carrier based systems Pharmaceut. Res. 24 2007 963 970
64. X. Zeng, G. Martin, C. Marriott, and J. Pritchard Lactose as a carrier in dry powder formulations: the influence of surface characteristics on drug delivery J. Pharm. Sci. 90 2001 1424 1434
65. X.M. Zeng, G.P. Martin, C. Marriott, and J. Pritchard The effects of carrier size and morphology on the dispersion of salbutamol sulphate after aerosolization at different flow rates J. Pharm. Pharmacol. 52 2000 1211 1221
66. X.M. Zeng, G.P. Martin, C. Marriott, and J. Pritchard The influence of carrier morphology on drug delivery by dry powder inhalers Int. J. Pharmaceut. 200 2000 93 106
67. X.M. Zeng, G.P. Martin, C. Marriott, and J. Pritchard Lactose as a carrier in dry powder formulations: the influence of surface characteristics on drug delivery J. Pharm. Sci. 90 2001 1424 1434
68. K. Zhu, R.B. Tan, F. Chen, K.H. Ong, and P.W. Heng Influence of particle wall adhesion on particle electrification in mixers Int. J. Pharm. 328 2007 22 34