Bonding ability of three ethanol-based adhesives after thermal fatigue

American Journal of Dentistry

Volumn 24, Issue 3, 2011, Pages 159-164

  Perdigao, Jorge ^a   Gomes, George ^b   Sezinando, Ana ^c,d  

^a UNIVERSITY OF MINNESOTA   (United States)

^b UNIVERSITY OF SANTIAGO DE COMPOSTELA   (Spain)

^c UNIVERSIDAD REY JUAN CARLOS   (Spain)

^d INSTITUTO SUPERIOR DE CIÊNCIAS DA SAÚDE EGAS MONIZ   (Portugal)

Author keywords

[No Author keywords available]

Indexed keywords

2 HYDROXYETHYL METHACRYLATE; ALCOHOL; BIOMEDICAL AND DENTAL MATERIALS; BISPHENOL A BIS(2 HYDROXYPROPYL) ETHER DIMETHACRYLATE; DENTIN BONDING AGENT; EXCITE CEMENT; METHACRYLIC ACID DERIVATIVE; POLYURETHAN; RESIN; RESIN CEMENT; SINGLE BOND PLUS; SOLVENT; URETHANE DIMETHACRYLATE LUTING RESIN; WATER;

ADHESION; ARTICLE; CHEMISTRY; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL ACID ETCHING; DENTAL BONDING; DENTAL SURGERY; ENAMEL; HUMAN; IMAGE PROCESSING; MATERIALS TESTING; MECHANICAL STRESS; METHODOLOGY; PHYSICAL CHEMISTRY; RANDOMIZED CONTROLLED TRIAL; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTY; TEMPERATURE; TIME; ULTRASTRUCTURE;

ACID ETCHING, DENTAL; ADHESIVENESS; BISPHENOL A-GLYCIDYL METHACRYLATE; COMPOSITE RESINS; DENTAL BONDING; DENTAL ENAMEL; DENTAL MATERIALS; DENTAL RESTORATION, PERMANENT; DENTIN-BONDING AGENTS; ETHANOL; HUMANS; IMAGE PROCESSING, COMPUTER-ASSISTED; MATERIALS TESTING; METHACRYLATES; MICROSCOPY, ELECTRON, SCANNING; PHYSICOCHEMICAL PROCESSES; POLYURETHANES; RESIN CEMENTS; SOLVENTS; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS; WATER;

EID: 80051740918     PISSN: 08948275     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (53)

1. Peumans M, Kanurailli P, De Munck J, Van Landuyt K, Lambrechts P, Van Meerbeek B. Clinical effectiveness of contemporary adhesives: A systematic review of current clinical trials. Dent Mater 2005;21:864-881. (Pubitemid 41108347)
2. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, Vanherle G. Buonocore memorial lecture. Adhesion to enamel and dentin: Current status and future challenges. Oper Dent 2003;28:215-235. (Pubitemid 37237447)
3. Goracci C, Sadek FT, Monticelli F, Cardoso PE, Ferrari M. Microtensile bond strength of self-etching adhesives to enamel and dentin. J Adhes Dent 2004;6:313-318. (Pubitemid 40126106)
4. Bouillaguet S, Gysi P, Wataha JC, Ciucchi B, Cattani M, Godin C, Meyer JM. Bond strength of composite to dentin using conventional, one-step, and self-etching adhesive systems. J Dent 2001;29:55-61. (Pubitemid 33660541)
5. Inoue S, Vargas MA, Abe Y, Yoshida Y, Lambrechts P, Vanherle G, Sano H, Van Meerbeek B. Microtensile bond strength of eleven contemporary adhesives to dentin. J Adhes Dent 2001;3:237-245. (Pubitemid 33771577)
6. De Munck J, Van Landuyt KV, Peumans M, Poitevin A, Lambrechts P, Braem M, Van Meerbeek B. A critical review of the durability of adhesion to tooth tissue: Methods and results. J Dent Res 2005;84:118-132. (Pubitemid 43822043)
7. De Munck J, Van Meerbeek B, Yoshida Y, Inoue S, Vargas M, Suzuki K, Lambrechts P, Vanherle G. Four-year water degradation of total-etch adhesives bonded to dentin. J Dent Res 2003;82:136-140. (Pubitemid 41764126)
8. Tay FR, Pashley DH. Have dentin adhesives become too hydrophilic? J Can Dent Assoc 2003;69:726-731.
9. Okuda M, Pereira PN, Nakajima M, Tagami J, Pashley DH. Long-term durability of resin dentin interface: Nanoleakage vs. microtensile bond strength. Oper Dent 2002;27:289-296. (Pubitemid 43328590)
10. Li H, Burrow MF, Tyas MJ. Nanoleakage patterns of four dentin bonding systems. Dent Mater 2000;16:48-56.
11. Reis A, Loguercio AD. A 36-month clinical evaluation of ethanol/water and acetone-based etch-and-rinse adhesives in non-carious cervical lesions. Oper Dent 2009;34:384-391.
12. Reis A, Grande RHM, Oliveira GMS, Lopes GC, Loguercio AD. A 2-year evaluation of moisture on microtensile bond strength and nanoleakage. Dent Mater 2007;23:862-870. (Pubitemid 46734315)
13. Gale MS, Darvell BW. Thermal cycling procedures for laboratory testing of dental restorations. J Dent 1999;27:89-99.
14. Hashimoto M, Ohno H, Kaga M, Endo K, Sano H, Oguchi H. In vivo degradation of resin-dentin bonds in humans over 1 to 3 years. J Dent Res 2000;79:1385-1391. (Pubitemid 32489445)
15. Pashley DH, Tao L, Boyd L, King GE, Horner JA. Scanning electron microscopy of the substructure of smear layers in human dentine. Arch Oral Biol 1988;33:265-270.
16. Ito S, Tay FR, Hashimoto M, Yoshiyama M, Saito T, Bracken WW, Waller JL, Pashley DH. Effects of multiple coatings of two all-in-one adhesives on dentin bonding. J Adhes Dent 2005;7:133-141. (Pubitemid 40977235)
17. Pashley EL, Agee KA, Pashley DH, Tay FR. Effects of one versus two applications of an unfilled, all-in-one adhesive on dentine bonding. J Dent 2002;30:83-90. (Pubitemid 40433447)
18. Perdigão J, Lambrechts P, Van Meerbeek B, Vanherle G, Lopes ALB. A field emission SEM comparison of four post-fixation drying techniques for human dentin. J Biomed Mater Res 1995;29:1111-1120.
19. Hashimoto M, Tay FR, Ohno H, Sano H, Kaga M, Yiu C, Kumagai H, Kudou Y, Kubota M, Oguchi H. SEM and TEM analysis of water degradation of human dentinal collagen. J Biomed Mater Res (Appl Biomater) 2003;66B:289-298.
20. Armstrong SR, Vargas MA, Fang Q, Laffoon JE. Microtensile bond strength of a total-etch 3-step, total-etch 2-step, self-etch 2-step, and a selfetch 1-step dentin bonding system through 15-month water storage. J Adhes Dent 2003;5:47-56. (Pubitemid 37158051)
21. Hashimoto M, Ohno H, Sano H, Tay FR, Kaga M, Kudou Y, Oguchi H, Araki Y, Kubota M. Micromorphological changes in resin-dentin bonds after 1 year of water storage. J Biomed Mater Res (Appl Biomater) 2002;63B:306-311. (Pubitemid 34521332)
22. Ito S, Hashimoto M, Wadganokar B, Svizero N, Carvalho RM, Yiu C, Rueggeberg F, Foulger S, Saito T, Nishitani Y, Yoshiyama M, Tay FR, Pashley DH. Effects of resin hydrophilicity on water sorption and changes in modulus of elasticity. Biomaterials 2006;26:6449-6459.
23. Canilho MR, Carvalho RM, Tay FR, Yiu C, Pashley DH. Durability of resindentin bonds related to water and oil storage. Am J Dent 2005;18:315-319. (Pubitemid 43171015)
24. Santerre JP, Shajii L, Leung BW. Relation of dental composite formulations to their degradation and the release of hydrolyzed polymeric resin-derived products. Crit Rev Oral Biol Med 2001;12:136-151. (Pubitemid 32429280)
25. De Munck J, Van Landuyt K, Coutinho E, Poitevin A, Peumans M, Lambrechts P, Van Meerbeek B. Micro-tensile bond strength of adhesives bonded to class-I cavity-bottom dentin after thermo-cycling. Dent Mater 2005;21:999-1007. (Pubitemid 41475538)
26. Sadr A, Shimada Y, Lu H, Tagami J. The viscoelastic behavior of dental adhesives: A nanoindentation study. Dent Mater 2009;25:13-19.
27. Perdigao J, Lopes M, Gomes G. In vitro bonding performance of self-etch adhesives. Part II - Ultra-morphological study. Oper Dent 2008;33:534-549.
28. Takahashi A, Sato Y, Uno S, Pereira PN, Sano H. Effects of mechanical properties of adhesive resins on bond strength to dentin. Dent Mater 2002;18:263-268. (Pubitemid 40072280)
29. Can Say E, Nakajima M, Senawongse P, Soyman M, Ozer F, Ogata M, Tagami J. Microtensile bond strength of a filled vs unfilled adhesive to dentin using self-etch and total-etch technique. J Dent 2006;34:283-291. (Pubitemid 43390637)
30. Lee YK, Pinzon LM, O'Keefe KL, Powers JM. Effect of filler addition on the bonding parameters of dentin bonding adhesives bonded to human dentin. Am J Dent 2006;19:23-27. (Pubitemid 43503243)
31. Pongprueksa P, Kuphasuk W, Senawongse P. Effect of elastic cavity wall and occlusal loading on microleakage and dentin bond strength. Oper Dent 2007;32:464-473.
32. Bedran-de-Castro AK, Cardoso PE, Ambrosano GM, Pimenta LA. Thermal and mechanical load cycling on microleakage and shear bond strength to dentin. Oper Dent 2004;29:42-48. (Pubitemid 38130898)
33. Miyazaki M, Sato M, Onose H. Durability of enamel bond strength of simplified bonding systems. Oper Dent 2000;25:75-80.
34. Helvatjoglu-Antoniades M, Koliniotou-Kubia E, Dionyssopoulos P. The effect of thermal cycling on the bovine dentine shear bond strength of current adhesive systems. J Oral Rehabil 2004;31:911-917. (Pubitemid 39360730)
35. Fabre HSC, Fabre S, Cefaly DFG, Carrilho MRO, Garcia FCP, Wang L. Water sorption and solubility of dentin bonding agents light-cured with different light sources. J Dent 2007;35:253-258.
36. Pongprueksa P, Kuphasuk W, Senawongse P. The elastic moduli across various types of resin/dentin interfaces. Dent Mater 2008;24:1102-1106.
37. Dickens SH, Cho BH. Interpretation of bond failure through conversion and residual solvent measurements and weibull analyses of flexural and microtensile bond strengths of bonding agents. Dent Mater 2005;21:354-364. (Pubitemid 40583943)
38. Wang Y, Spencer P. Evaluation of the interface between one-bottle adhesive systems and dentin by Goldner's trichrome. Am J Dent 2005;18:66-72. (Pubitemid 40934196)
39. Koshiro K, Inoue S, Tanaka T, Koase K, Fujita M, Hashimoto M, Sano H. In vivo degradation of resin-dentin bonds produced by a self-etch vs. a total-etch adhesive system. Eur J Oral Sci 2004;112:368-375. (Pubitemid 39163801)
40. Kubo S, Kawasaki K, Yokota H, Hayashi Y. Five-year clinical evaluation of two adhesive systems in non-carious cervical lesions. J Dent 2006;34:97-105. (Pubitemid 43139006)
41. Loguercio AD, Reis A, Hernandez PA, Macedo RP, Busato AL. 3-year clinical evaluation of posterior packable composite resin restorations. J Oral Rehabil 2006;33:144-151. (Pubitemid 43479028)
42. Dalton Bittencourt D, Ezecelevski IG, Reis A, Van Dijken JW, Loguercio AD. An 18-months' evaluation of self-etch and etch & rinse adhesive in non-carious cervical lesions. Acta Odontol Scand 2005;63:173-178. (Pubitemid 40868478)
43. Toledano M, Osorio R, Albaladejo A, Aguilera FS, Tay FR, Ferrari M. Effect of cyclic loading on the microtensile bond strengths of total-etch and self-etch adhesives. Oper Dent 2006;31:25-32. (Pubitemid 43341799)
44. El-Kholany NR, Abdelaziz KM, Zaghloul NM, Aboulenien N. Bonding of single-component adhesives to dentin following chemomechanical caries removal. J Adhes Dent 2005;7:281-287. (Pubitemid 43048579)
45. Hashimoto M, Tay FR, Svizero NR, de Gee AJ, Feilzer AJ, Sano H, Kaga M, Pashley DH. The effects of common errors on sealing ability of totaletch adhesives. Dent Mater 2006;22:560-568.
46. Kuphasuk W, Harnirattisai C, Senawongse P, Tagami J. Bond strengths of two adhesive systems to dentin contaminated with a hemostatic agent. Oper Den J 2007;32:399-405.
47. Perdigao J, Geraldeli S, Carmo ARP, Dutra HR. In vivo influence of residual moisture on microtensile bond strengths of one-bottle adhesives. J Esthet Restor Dent 2002;14:31-38. (Pubitemid 43020830)
48. Moszner N, Zeuner F, Pfeiffer, S, Schurte I, Rheinberger V, Drache M. Synthesis, radical polymerization and adhesive properties of hydrolytically stable phosphonic acid monomers. Macromol Mater Eng 2001;286:225-231.
49. Malacame J, Carvalho RM, de Goes MF, Svizero N, Pashley DH, Tay FR, Yiu CK, Carrilho MRO. Water sorption/solubility of dental adhesive resins. Dent Mater 2006;12:973-980. (Pubitemid 44313991)
50. Floyd CJE, Dickens SH. Network structure of Bis-GMA-and UDMA-based resin systems. Dent Mater 2006;22:1143-1149. (Pubitemid 44666162)
51. http://esstechinc.thomasnet.com/item/resins/bisgma/x-950-0000; and http://esstechinc.thomasnet.com/item/resins/urethane-dimethacrylate/x-850-0000 (accessed August 15, 2010).
52. Hashimoto M, Ito S, Tay FR, Svizero NR, Sano H, Kaga M, Pashley DH. Fluid movement across the resin-dentin interface during and after bonding. J Dent Res 2004;89:843-848. (Pubitemid 41756896)
53. Hashimoto M, Tay FR, Sano H, Kaga M, Pashley DH. Diffusion-induced water movement within resin-dentin bonds during bonding. J Biomed Mater Res (Appl Biomater) 2006;79B:453-458. (Pubitemid 44652073)