Modelling, identification and control of thermal deformation of machine tool structures, part 1: Concept of generalized modelling

Journal of Manufacturing Science and Engineering, Transactions of the ASME

Volumn 120, Issue 3, 1998, Pages 623-631

  Fraser, S ^a   Attia, M H ^a   Osman, M O M ^a  

^a Civil and Environmental Engineering   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; DEFORMATION; EXTRAPOLATION; FINITE ELEMENT METHOD; HEAT TRANSFER; MACHINE DESIGN; MACHINING; MATHEMATICAL MODELS; MATHEMATICAL TRANSFORMATIONS; RESIDUAL STRESSES; THERMAL EFFECTS; TRANSIENTS;

HANKEL TRANSFORMATIONS; THERMAL DEFORMATIONS;

MACHINE TOOLS;

EID: 0032138875     PISSN: 10871357     EISSN: 15288935     Source Type: Journal    
DOI: 10.1115/1.2830167     Document Type: Article

References (38)

1. Chiappulini, R., Giannotti, L., and Galbersanini, “On-Line Correction via Software of Thermal Errors in Numerically Controlled Machine Tools,” Scientific Committee M of 41th CIRP General Assembly, August, 1991.
2. Attia, M. H., “Modelling of Thermal Deformation of Machine Tool Structures: Design and Control Issues,” Proc, Int. Symposium on Manufacturing and Materials Processing, Int. Centre of Heat and Mass Transfer, Dubrovnik, Yugoslavia, August, 1990.
3. Tonshoff, H. K., and Wulfsberg, J. P., “Developments in Diagnosis of Thermal Induced Displacements in Machine Tools,” Symposium on Grinding Fundamentals and Applications, ASME-WAM, San Francisco, Dec. 1989, pp. 281-295.
4. Spur, G., and Heisel, U., “Automatic Compensation of Thermal Disturbances in Machine Tools,” Proceedings of the 3rd Int. Conf on Production Engineering, Kyoto, 1977.
5. Jedrzejewski, J., “Kompansation thermischer Verlagerungen einer Drehmaschine,” Werkstatt und Betrieb, Vol. 118, No. 2, 1985, pp. 85-87.
6. Ichimiya, R., “Compensation for Thermal Deformation of Milling Machine,” Proc. Conf Numerical Methods in Machine Tool Design, Wroclaw, Poland, 1980, pp. 39-49.
7. Week, M., Schuze, O., Michels, F., and Bonse, R., “Optimization of Machine Tools Performance and Accuracy,” ASME Symposium on Intelligent Machine Tool Systems, M. H. Attia and M. Elbestawi, edsM Int Mech Engrg. Cong. Expo., November, 1994, pp. 895-908.
8. Spur, G., Hoffman, E., Paluncic, Z., Benzinger, K., and Nymoen, H., “Thermal Behaviour Optimization of Machine Tools,” Annals of the CIRP., Vol. 37, No 1, 1988, pp. 401-405.
9. McKeown, P. A., Week, M., and Bonse, R., “Reduction and Compensation of Thermal Errors in Machine Tools,” Annals of the CIRP, Vol. 44, No. 2, 1995.
10. Balsamo, A., Marques, S., and Sartori, S., “A Method for Thermal Deformation Correction of CMMs,” Annals of the CIRP, Vol. 39, No. 1, 1990, pp. 557-560.
11. Chen, J. S., Yuan, J. X., Ni, J., and Wu, S. M., “Real-time Compensation for Time-Variant Volumetric Errors on a Machining Center,” ASME Journal of Engineering for Industry, Vol. 115, November, 1993, pp. 472-479.
12. Sartori, S., and Zhang, G. X., “Geometric Error Measurement and Compensation of Machines” Annals of the CIRP, Vol. 44, No. 2, 1995, pp. 599-609.
13. Schellekens, P., Soons, J., Spann, H., Look, V., Trapet, E., Dooms, J., and De Ruiter, H., “,” Report to the Commission of the European Communities, Development of Methods for the numerical Correlation of Machine Tools EUR 15377 EN 1-191, 1993, cited in Ref. 12.
14. Mou, J., and Liu, C. R., “An Adaptive Methodology for Machine Tool Error Correction,” ASME Journal of Engineering for Industry, Vol. 117, August, 1995, pp. 389-399.
15. Mou, J., Donmez, M. A., and Cetinkunt, S., “An Adaptive Error Correction Method Using Feature-Based Analysis Techniques for Machine Performance Improvement, Part 1: Theory Derivation,” ASME Journal of Engineering for Industry, Vol. 117, November, 1995, pp. 584-590.
16. Mou, J., Donmez, M. A., and Cetinkunt, S., “An Adaptive Error Correction Method Using Feature-Based Analysis Techniques for Machine Performance Improvement, Part 2: Experimental Verification,” ASME Journal of Engl neering for Industry, Vol. 117, November, 1995, pp. 591-600.
17. Aronson, R., “Machine Tool 101: Part 7, Machine Tools of the Future,” Manufacturing Engineering, July 1994, pp. 39-45.
18. Veldhuis, S. C., and Elbestawi, M. A., “A Strategy for the Compensation of Errors in Five-Axis Machining,” Annals of the CIRP, 1995.
19. Moriwaki, T., and Zhao, C., “Neural Network Approach to Identify Thermal Deformation of Machining Center,” Human Aspects in Computer Integrated Manufacturing, G, J. Oiling and F. Kimura, eds., Elsevier Science Publishers B. V. (North-Holland), 1992, pp. 685-697.
20. Chen, J. S., Yuan, J. X., Ni, J., and Wu, S. M., “Thermal Error Modelling for Volumetric Error Compensation,” Sensors and Signal Processing for Manufacturing, ASME/PED-Vol. 55, 1992, pp. 113-125.
21. Ferreira, P. M., and Liu, C. R., “A Method for Estimating and Compensating Quasistatic Errors of Machine Tools,” Trans ASME Journal of Engineering for Industry, Vol. 115, Feb., 1993, pp. 149-159.
22. Hatamura, Y., Nagao, T., Mitsuishi, M., Kato, K., Taguchi, S., Okumura, T., Nakagawa, G, and Sugishita, H., “Development of an Intelligent Machining Center Incorporating Active Compensation for Thermal Distortion,” Annals of the CIRP, Vol. 42, No. 1, 1993, pp. 549-552.
23. Ni, J., and Wu, S. M., “An On-line Measurement Technique for Machine Volumetric Error Compensation,” Trans ASME Journal of Engineering for Industry, Vol. 1993, Feb., 1993, pp. 85-92.
24. Sata, T., Takeuchi, Y., Sato, N., and Okubo, N., “Analysis of Thermal Deformation of Machine Tool Structure and its Application,” Proc. 14th Int MTDR Conf, 1973, pp. 275-280.
25. Sata, T., Takeuchi, Y., Okubo, N., “Control of the Thermal Deformation of a Machine Tool,” Proc. 16th Int. MTDR Conference, 1975, pp. 203-208.
26. Moriwaki, T., “Thermal Deformation and Its On-Line Compensation of Hydraulically Supported Precision Spindle,” Annals of the CIRP, Vol. 37, No. 1, 1988, pp. 393-396.
27. Fraser, S., Attia, M. H., and Osman, M. O. M., “Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures: Part 2—Generalized Transfer Functions,” ASME Journal of Manufacturing Science and Engineering, pp. 632-639.
28. Fraser, S., Attia, M. H., and Osman, M. O. M., “Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures: Part 3—Real Time Identification of Heat Input to the Structure,” ASME Journal of Manufacturing Science and Engineering, in press.
29. Fraser, S., Attia, M. H., and Osman, M. O. M., “Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures: Part 4—A Multi-Variable Closed-Loop Control System” ASME Journal of Manufacturing Science and Engineering, in press.
30. Takeuchi, Y., Sakamoto, M., and Imura, K., “Development of Integrated Turning System with Predictive Compensatory Function for Machining Errors,” Annals of the CIRP, Vol. 34, No. 1, 1985, pp. 519-523.
31. Beck, J. V., Blackwell, B., and St. Clair, Jr., C., Inverse Heat Conduction — III—Posed Problems, John Wiley & Sons Inc., 1985.
32. Attia, M. H., and Kops, L., “Nonlinear Thermoelastic Behaviour of Structural Joint—Solution to a Missing Link for Prediction of Thermal Deformation of Machine Tools,” ASME Journal of Engineering for Industry, Vol. 101, August 1979, pp. 348-354.
33. Attia, M. H., and Kops, L., “Computer Simulation of Nonlinear Thermoelastic Behavior of a Joint in Machine Tool Structure and Its Effect on Thermal Deformation,” ASME Journal of Engineering for Industry, Vol. 101, August 1979, pp. 355-361.
34. Attia, M. H., and Kops, L., “System Approach to the Thermal Behaviour and Deformation of Machine Tool Structures in Response to the Effect of Fixed Joints,” ASME Journal of Engineering for Industry, Vol. 103, 1981, pp. 67-72.
35. Carslaw, H. S., and Jaeger, J. C., “Conduction of Heat in Solids,” second Edition, Oxford at the Clarendon Press, 1978, Oxford, Great Britain.
36. Sneddon, I. N., The Use of Integral Transforms, McGraw-Hill, New York, 1972.
37. Attia, M. H., and Kops, L., “Thermometric Design Considerations for Temperature Monitoring in Machine Tools and CMM Structures,” International Journal of Advanced Manufacturing Technology, 8: 311-319, September, 1993.
38. ALGOR Process Reference Manual, ALGOR Interactive Systems, Inc., Pittsburgh, PA.