-
1
-
-
0029546324
-
Reduction and Com-pensation of Thermal Errors in Machine Tools
-
McKeown, P. A., Week, M., and Bonse, R., 1995, “Reduction and Com-pensation of Thermal Errors in Machine Tools,” Annals of the CIRP, Vol. 44, No. 2.
-
(1995)
Annals of the CIRP
, vol.44
, Issue.2
-
-
McKeown, P.A.1
Week, M.2
Bonse, R.3
-
3
-
-
85025232237
-
-
Keynote Paper, Int. Symposium on Manu-facturing and Materials Processing, Int. Centre of Heat and Mass Transfer, Dubrovnik, Yugoslavia
-
Attia, M. H., 1990, “Modelling of Thermal Deformation of Machine Tool Structures: Design and Control Issues,” Keynote Paper, Int. Symposium on Manu-facturing and Materials Processing, Int. Centre of Heat and Mass Transfer, Dubrovnik, Yugoslavia.
-
(1990)
Modelling of Thermal Deformation of Machine Tool Structures: Design and Control Issues
-
-
Attia, M.H.1
-
4
-
-
0027540832
-
A Method for Estimating and Compensating Quasistatic Errors of Machine Tools
-
Ferreira, P.M., and Liu, C. R., 1993, “A Method for Estimating and Compensating Quasistatic Errors of Machine Tools,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 115, pp. 149-159.
-
(1993)
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, vol.115
, pp. 149-159
-
-
Ferreira, P.M.1
Liu, C.R.2
-
5
-
-
0027274432
-
Development of an Intelligent Machining Center Incorporating Active Compensation for Thermal Distortion
-
Hatamura, Y., Nagao, T., Mitsuishi, M., Kato, K., Taguchi, S., Okumura, T., Nakagawa, G., and Sugishita, H., 1993, “Development of an Intelligent Machining Center Incorporating Active Compensation for Thermal Distortion,” Annals of the CIRP, Vol. 42, No. 1, pp. 549-552.
-
(1993)
Annals of the CIRP
, vol.42
, Issue.1
, pp. 549-552
-
-
Hatamura, Y.1
Nagao, T.2
Mitsuishi, M.3
Kato, K.4
Taguchi, S.5
Okumura, T.6
Nakagawa, G.7
Sugishita, H.8
-
6
-
-
0027540896
-
An On-line Measurement Technique for Machine Volumetric Error Compensation
-
Ni, J., and Wu, S. M., 1993, “An On-line Measurement Technique for Machine Volumetric Error Compensation,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 115, pp. 85-92.
-
(1993)
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, vol.115
, pp. 85-92
-
-
Ni, J.1
Wu, S.M.2
-
7
-
-
0029356975
-
An Adaptive Methodology for Machine Tool Error Correction
-
Mou, J., and Liu, C. R., 1995, “An Adaptive Methodology for Machine Tool Error Correction,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 117, pp. 389-399.
-
(1995)
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, vol.117
, pp. 389-399
-
-
Mou, J.1
Liu, C.R.2
-
8
-
-
0011033175
-
Compensation for Thermal Deformation of Milling Machine
-
Wroclaw, Poland
-
Ichimiya, R., 1980, “Compensation for Thermal Deformation of Milling Machine,” Proc. Conf. Numerical Methods in Machine Tool Design, Wroclaw, Poland, pp. 39-49.
-
(1980)
Proc. Conf. Numerical Methods in Machine Tool Design
, pp. 39-49
-
-
Ichimiya, R.1
-
9
-
-
0023170388
-
Error Diagnosis and Compensation Using Kinematic Model and Position Error Data
-
Duffie, N. A., and Malmberg, S. J., 1987, “Error Diagnosis and Compensation Using Kinematic Model and Position Error Data,” Annals of the CIRP, Vol. 36, No. 1, pp. 355-358.
-
(1987)
Annals of the CIRP
, vol.36
, Issue.1
, pp. 355-358
-
-
Duffie, N.A.1
Malmberg, S.J.2
-
10
-
-
17444406033
-
Optimization of Machine Tools Performance and Accuracy
-
Week, M., Schuze, O., Michels, F., and Bonse, R., 1994, “Optimization of Machine Tools Performance and Accuracy,” ASME PED-Vol. 68-2, pp. 895-908.
-
(1994)
ASME PED
, vol.68
, Issue.2
, pp. 895-908
-
-
Week, M.1
Schuze, O.2
Michels, F.3
Bonse, R.4
-
11
-
-
0027696462
-
Real-time Compensation for Time-Variant Volumetric Errors on a Machining Center
-
Chen, J. S., Yuan, J. X., Ni, J., and Wu, S. M., 1993, “Real-time Compensation for Time-Variant Volumetric Errors on a Machining Center, ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 115, pp. 472-479.
-
(1993)
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, vol.115
, pp. 472-479
-
-
Chen, J.S.1
Yuan, J.X.2
Ni, J.3
Wu, S.M.4
-
12
-
-
0029542194
-
Geometric Error Measurement and Compensation of Machines
-
Sartori, S., Colonnetti, G., and Zhang, G. X., 1995, “Geometric Error Measurement and Compensation of Machines,” Annals of the CIRP, Vol. 44, No. 2, pp. 599-609.
-
(1995)
Annals of the CIRP
, vol.44
, Issue.2
, pp. 599-609
-
-
Sartori, S.1
Colonnetti, G.2
Zhang, G.X.3
-
13
-
-
0010961668
-
-
Report to the Commission of the European Com-munities, EUR 15377 EN 1-191 (cited in [12])
-
Schellekens, P., Soons, J., Spann, H., Look, V., Trapet, E., Dooms, J., De Ruiter, H., and Maisch, M., 1993, “Development of Methods for the Numerical Correlation of Machine Tools,” Report to the Commission of the European Com-munities, EUR 15377 EN 1-191 (cited in [12]).
-
(1993)
Development of Methods for the Numerical Correlation of Machine Tools
-
-
Schellekens, P.1
Soons, J.2
Spann, H.3
Look, V.4
Trapet, E.5
Dooms, J.6
De Ruiter, H.7
Maisch, M.8
-
14
-
-
0029356975
-
An Adaptive Methodology for Machine Tool Error Correction
-
Mou, J., and Liu, C. R., 1995, “An Adaptive Methodology for Machine Tool Error Correction,” ASME JOURNAL OF ENGINEERING FOR INDUSTRY, Vol. 117, pp. 389-399.
-
(1995)
ASME JOURNAL OF ENGINEERING FOR INDUSTRY
, vol.117
, pp. 389-399
-
-
Mou, J.1
Liu, C.R.2
-
15
-
-
85024583783
-
An Adaptive Error Correction Method Using Feature-Based Analysis Techniques for Machine Performance Improvement
-
pp. 591-600
-
Mou, J., Donmez, M. A., and Cetinkunt, S., 1995, “An Adaptive Error Correction Method Using Feature-Based Analysis Techniques for Machine Performance Improvement,” Parts 1 and 2, ASME JOURNAL OF ENGINEERING FOR INDUStry, Vol. 117, pp. 584-590, and pp. 591-600.
-
(1995)
Parts 1 and 2, ASME JOURNAL OF ENGINEERING FOR Industry
, vol.117
, pp. 584-590
-
-
Mou, J.1
Donmez, M.A.2
Cetinkunt, S.3
-
16
-
-
85025223992
-
-
CIRP conf. on Thermal Behaviour, Intelligent Diagnostics and Supervising of Machining Systems, Poland
-
Dehaes, J., Kruth, J., and Vanherck, P., 1996, “K. U. Leuven Research on Thermal Compensation of Five Axis Milling Machine,” CIRP conf. on Thermal Behaviour, Intelligent Diagnostics and Supervising of Machining Systems, Poland, pp. 125-137.
-
(1996)
K. U. Leuven Research on Thermal Compensation of Five Axis Milling Machine
, pp. 125-137
-
-
Dehaes, J.1
Kruth, J.2
Vanherck, P.3
-
17
-
-
0001573138
-
A Method for Thermal Deformation Correction of CMMs
-
Balsamo, A., Marques, S., and Sartori, S., 1990, “A Method for Thermal Deformation Correction of CMMs,” Annals of the CIRP, Vol. 39, No. 1, pp. 557-560.
-
(1990)
Annals of the CIRP
, vol.39
, Issue.1
, pp. 557-560
-
-
Balsamo, A.1
Marques, S.2
Sartori, S.3
-
18
-
-
85025224469
-
-
Proc., 16, h Int. MTDR Conference, McMillan Press
-
Sata, T., Takeuchi, Y., and Okubo, N., 1975, “Control of the Thermal Deformation of a Machine Tool,” Proc., 16, h Int. MTDR Conference, McMillan Press, pp. 203-208.
-
(1975)
Control of the Thermal Deformation of a Machine Tool
, pp. 203-208
-
-
Sata, T.1
Takeuchi, Y.2
Okubo, N.3
-
19
-
-
0002661567
-
Thermal Deformation and Its On-Line Compensation of Hydraulically Supported Precision Spindle
-
Moriwaki, T., 1988, “Thermal Deformation and Its On-Line Compensation of Hydraulically Supported Precision Spindle,” Annals of the CIRP, Vol. 37, No. 1, pp. 393-396.
-
(1988)
Annals of the CIRP
, vol.37
, Issue.1
, pp. 393-396
-
-
Moriwaki, T.1
-
20
-
-
84970666526
-
-
Proc. 10th Int. MTDR Conference, McMillan Press
-
Spur, G., and Fischer, H., 1969, “Thermal Behaviour of Machine Tools,” Proc. 10th Int. MTDR Conference, McMillan Press, pp. 147-160.
-
(1969)
Thermal Behaviour of Machine Tools
, pp. 147-160
-
-
Spur, G.1
Fischer, H.2
-
21
-
-
17444428165
-
Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures: Part I—Concept of Generalized Modelling
-
Fraser, S., Attia, M. H., and Osman, M. O. M., 1995, “Modelling, Identification and Control of Thermal Deformation of Machine Tool Structures: Part I—Concept of Generalized Modelling,” submitted for publication in the ASME JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING.
-
(1995)
ASME JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING
-
-
Fraser, S.1
Attia, M.H.2
Osman, M.O.M.3
-
22
-
-
17444382779
-
Modelling, Identi-fication and Control of Thermal Deformation of Machine Tool Structures; Part II: Concept of Generalized Transfer Functions
-
Fraser, S., Attia, M. H., and Osman, M. O. M., 1995, “Modelling, Identi-fication and Control of Thermal Deformation of Machine Tool Structures; Part II: Concept of Generalized Transfer Functions,” submitted for publication in the ASME JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING.
-
(1995)
ASME JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING
-
-
Fraser, S.1
Attia, M.H.2
Osman, M.O.M.3
-
23
-
-
17444399767
-
Modelling, Identi-fication and Control of Thermal Deformation of Machine Tool Structures: Part III—Real-Time Identification of Heat Sources
-
Fraser, S., Attia, M. H., and Osman, M. O. M., 1997, “Modelling, Identi-fication and Control of Thermal Deformation of Machine Tool Structures: Part III—Real-Time Identification of Heat Sources,” submitted for publication in the ASME JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING.
-
(1997)
ASME JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING
-
-
Fraser, S.1
Attia, M.H.2
Osman, M.O.M.3
-
24
-
-
0028479544
-
Machine Tool 101: Part 7, Machine Tools of the Future
-
July
-
Aronson, R., “Machine Tool 101: Part 7, Machine Tools of the Future,” Manufacturing Engineering, July 1994, pp. 39-45.
-
(1994)
Manufacturing Engineering
, pp. 39-45
-
-
Aronson, R.1
-
25
-
-
0003478954
-
-
John Wiley & Sons Inc., N.Y
-
Carnahan, B., Luther, H. L., and Wilkes, J. O., 1969, Applied Numerical Methods, John Wiley & Sons Inc., N.Y.
-
(1969)
Applied Numerical Methods
-
-
Carnahan, B.1
Luther, H.L.2
Wilkes, J.O.3
-
26
-
-
17444388971
-
-
CIRP Conf. on Thermal Behaviour, Intelligent Diagnostics and Supervising of Machining Systems, Poland
-
Inaba, C., Yoshimurs, K., Shinno, H., and Ito, Y., 1996, “Mutual Effects of Thermal Behaviour in Multi-layered Spindle for System Machine,” CIRP Conf. on Thermal Behaviour, Intelligent Diagnostics and Supervising of Machining Systems, Poland, pp. 79-89.
-
(1996)
Mutual Effects of Thermal Behaviour in Multi-Layered Spindle for System Machine
, pp. 79-89
-
-
Inaba, C.1
Yoshimurs, K.2
Shinno, H.3
Ito, Y.4
-
28
-
-
85025197578
-
-
Proc. 14th Int. MTDR Conference, McMillan Press
-
Sata, T., Takeuchi, Y., Sato, N., and Okubo, N., 1973, “Analysis of Thermal Deformation of Machine Tool Structure and its Application,” Proc. 14th Int. MTDR Conference, McMillan Press, pp. 275-280.
-
(1973)
Analysis of Thermal Deformation of Machine Tool Structure and Its Application
, pp. 275-280
-
-
Sata, T.1
Takeuchi, Y.2
Sato, N.3
Okubo, N.4
-
29
-
-
0003506102
-
-
the Benjamin/Cummings Publishing Company, Inc., New York
-
Nise, N. S., 1992, Control Systems Engineering, the Benjamin/Cummings Publishing Company, Inc., New York.
-
(1992)
Control Systems Engineering
-
-
Nise, N.S.1
-
30
-
-
85025226813
-
-
nc., Pittsburgh, PA
-
ALGOR Process Reference Manual, ALGOR Interactive Systems, Inc., Pittsburgh, PA.
-
ALGOR Interactive Systems
-
-
-
31
-
-
0003668165
-
-
Prentice Hall, New York, third edition
-
Vegte, J. V., 1994, Feedback Control Systems, Prentice Hall, New York, third edition.
-
(1994)
Feedback Control Systems
-
-
Vegte, J.V.1
|