Corrosion protection using conducting polymers

Conjugated Polymers: Processing and Applications

Volumn 2, Issue , 2007, Pages 15-1-15-53

  Tallman, Dennis E ^a   Bierwagen, Gordon P ^a  

^a NORTH DAKOTA STATE UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 84865043427     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (236)

1. Corrosion costs and preventative strategies in the United States, Tech Brief FHWA-RD-01-157, US Dept. of Transportation, 2002.
2. Davis, J.R. 1999. Corrosion of aluminum and aluminum alloys, 1st ed. Materials Park, OH: ASM International.
3. Ross, T.K., and J. Wolstenholme. 1977. Anticorrosion properties of zinc dust paints. Corros Sci 17 (4): 341.
4. Cohen, S.M. 1995. Replacements for chromium pretreatments on aluminum. Corrosion (Houston) 51 (1): 71.
5. Murray, R.W. 1984. Chemically modified electrodes. Electroanal Chem 13:191.
6. Przyluski, J. 1991. Conducting polymers-electrochemistry. Liechtenstein: Sci-Tech Publications.
7. Arbizzani, C., and M. Mastragostino. 1997. An overview of n-doped conjugated polymers. Curr Trends Polym Sci 2:217.
8. de Leeuw, D.M., et al. 1997. Stability of n-type doped conducting polymers and consequences for polymeric microelectronic devices. Synth Met 87 (1): 53.
9. Tallman, D.E., et al. 2002. Electroactive conducting polymers for corrosion control. Part 1. General introduction and a review of non-ferrous metals. J. Solid State Electrochem 6:73.
10. Spinks, G.M., et al. 2002. Electroactive conducting polymers for corrosion control. Part 2. Ferrous metals. J Solid State Electrochem 6:85.
11. Nanna, M.E., and G.P. Bierwagen. 2004. Mg-rich coatings: A new paradigm for Cr-free corrosion protection of Al aerospace alloys. JCT Res 1 (2): 69.
12. Dimitrov, N., et al. 2000. Dealloying of Al2CuMg in alkaline media. J Electrochem Soc 147 (9): 3283.
13. Kaiser, H., and G.A. Eckstein. 2003. Corrosion of alloys. In Corrosion and oxide films, eds. M. Stratmann and G.S. Frankel, 156. Weinheim, Germany: Wiley–VCH Verlag GmbH & Co. KgaA.
14. Pourbaix, M. 1974. Atlas of electrochemical equilibria in aqueous solutions, 2nd ed. Houston, Texas: NACE.
15. Schultze, J.W., and A.W. Hassel. 2003. Passivity of metals, alloys, and semiconductors. In Corrosion and oxide films, eds. M. Stratmann and G.S. Frankel, 216. Weinheim, Germany: Wiley–VCH Verlag GmbH & Co. KgaA.
16. Stratmann, M., and G.S. Frankel. 2003. Corrosion and oxide films. In Encyclopedia of electrochemistry, eds. A.J. Bard and M. Stratmann. Weinheim, Germany: Wiley–VCH.
17. Jones, D.A. 1995. Principles of prevention of corrosion, 2nd ed. Englewood Cliffs, NJ: Prentice Hall.
18. Plieth, W., and A. Bund. 2003. Corrosion protection by metallic coatings. In Corrosion and oxide films, eds. M. Stratmann and G.S. Frankel, 567. Weinheim, Germany: Wiley–VCH Verlag GmbH & Co. KgaA.
19. Wallace, G.G., G.M. Spinks, and L.A.P. Kane-Maguire. 2002. Conductive electroactive polymers: Intelligent materials systems, 2nd ed. Boca Raton, FL: CRC Press.
20. He, J., D.E. Tallman, and G.P. Bierwagen. 2004. Conjugated polymers for corrosion control: Scanning vibrating electrode studies of polypyrrole–aluminum alloy interactions. J Electrochem Soc 151 (12): B644.
21. Flick, E.W. 1993. Corrosion inhibitors—an industrial guide, 2nd ed. Norwich, NY: William Andrew Publishing=Noyes.
22. Magnussen, O.M. 2003. Corrosion protection by inhibition. In Corrosion and oxide films, eds. M. Stratmann and G.S. Frankel, 435. Weinheim, Germany: Wiley–VCH Verlag GmbH & Co. KGaA.
23. Ogle, K., and R.G. Buchheit. 2003. Conversion coatings. In Corrosion and oxide films, eds. M. Stratmann and G.S. Frankel, 460. Weinheim, Germany: Wiley–VCH Verlag GmbH & Co. KGaA.
24. Nathan, C.C. 1953. The inhibition by amines of the corrosion of iron by solutions of high acidity. Corrosion (Houston, TX, US) 9:199.
25. Hudson, R.M., and C.J. Warning. 1966. Effectiveness of organic compounds as pickling inhibitors in hydrochloric and sulfuric acid. Metal Finishing 64 (10): 58.
26. Szklarska-Smialowska, Z., and M. Kaminski. 1973. Effect of various substituents in thiophene on the inhibitor efficiency. Corros Sci 13 (1): 1.
27. Kelly, R.G., et al. 2003. Electrochemical techniques in corrosion science and engineering. New York: Marcel Dekker, Inc.
28. Bard, A.J., and L.R. Faulkner, 2001. Electrochemical methods: Fundamentals and applications, 2nd ed. New York: Wiley.
29. Wagner, C., and W. Traud. 1938. The interpretation of corrosion phenomena by super-imposition of electrochemical partial reactions and the formation of potentials of mixed electrodes. Zeitschrift fuer Elektrochemie und Angewandte Physikalische Chemie 44:391.
30. Barsoukov, E., and J.R. Macdonald. 2005. Impedance spectroscopy: Theory, experiment, and applications, 2nd ed., 595. Hoboken, NJ: John Wiley & Sons, Inc.
31. Deslouis, C., et al. 1995. Comparison of the AC impedance of conducting polymer films studied as electrode-supported and freestanding membranes. J Electrochem Soc 142 (6): 1902.
32. Boukamp, B.A. 1986. A package for impedance=admittance data analysis. Solid State Ionics 18–19 (1): 136.
33. Lu, W.-K., S. Basak, and R.L. Elsenbaumer. 1998. Corrosion inhibition of metals by conductive polymers. In Handbook of conducting polymers, 2nd ed., eds. T.A. Skotheim, R.L. Elsenbaumer, and J.R. Reynolds, 881. New York: Marcel Dekker, Inc.
34. Isaacs, H.S. 1974. Potential scanning of stainless steel during pitting corrosion. In Localized corrosion, 158. Houston, TX: NACE.
35. Isaacs, H.S., and B. Vyas. 1981. Electrochemical corrosion testing. In Electrochemical corrosion testing, eds. F. Mansfield and U. Bertocci, 3. Philidelphia, PA: American Society for Testing and Materials.
36. Isaacs, H.S. 1988. Measurement of the galvanic corrosion of soldered copper using the scanning vibrating electrode technique. Corr Sci 28:547.
37. Sargeant, D.A. 1997. Electrochemical scanning probes: Limitations, conflicts, and observations. Corros Prev Control 44:91.
38. He, J., et al. 2000. A scanning vibrating electrode study of chromated-epoxy primer on steel and aluminum. J Electrochem Soc 147 (10): 3661.
39. He, J., et al. 2000. Conducting polymers and corrosion iii. A scanning vibrating electrode study of poly(3-octyl pyrrole) on steel and aluminum. J Electrochem Soc 147 (10): 3667.
40. Tallman, D.E., et al. 2003. Scanning vibrating electrode studies of electroactive conducting polymers on active metals. In Electroactive polymers for corrosion control, eds. P. Zarras, J.D. Stenger-Smith, and Y. Wei, 228. Washington DC: American Chemical Society.
41. Lillard, R.S., P.J. Moran, and H.S. Isaacs. 1992. A novel method for generating quantitative electrochemical impedance spectroscopy. J Electrochem Soc 139 (4): 1007.
42. Bayet, E., et al. 2000. Performances and limitations of current probes for LEIS measurements. A comparative study of vibrating (SVET) and double-electrode. In Localized in-situ methods for investigating electrochemical interfaces, eds. S.R. Taylor, A.C. Hillier, and M. Seo, 200. The Electrochemical Society
43. Wittmann, M.W., R.B. Leggat, and S.R. Taylor. 1999. The detection and mapping of defects in organic coatings using local electrochemical impedance methods. J Electrochem Soc 146 (11): 4071.
44. Ammann, D. 1986. Ion-selective microelectrodes: Principles, design, and application. Berlin, Germany: Springer–Verlag.
45. Ding, H., and L.H. Hihara. 2005. Localized corrosion currents and pH profile over B4C, SiC, and Al2O3 reinforced 6092 aluminum composites. J Electrochem Soc 152 (4): B161.
46. Lin, C.J., R.G. Du, and T. Nguyen. 2000. In situ imaging of chloride ions at the metal=solution interface by scanning combination microelectrodes. Corrosion (Houston) 56 (1): 41.
47. Maile, F.J., T. Schauer, and C.D. Eisenbach. 2000. Evaluation of corrosion and protection of coated metals with local ion concentration technique (LICT). Prog Org Coat 38 (2): 111.
48. Bard, A.J., and M.V. Mirkin. 2001. Scanning electrochemical microscopy, 650. New York: Marcel Dekker, Inc.
49. Arca, M., M.V. Mirkin, and A.J. Bard. 1995. Polymer films on electrodes. 26. Study of ion transport and electron transfer at polypyrrole films by scanning electrochemical microscopy. J Phys Chem 99 (14): 5040.
50. Borgwarth, K., and J. Heinze. 2001. Heterogeneous electron transfer reactions. In Scanning electrochemical microscopy, eds. A.J. Bard and M.V. Mirkin, 201. New York: Marcel Dekker.
51. Kwak, J., C. Lee, and A.J. Bard. 1990. Scanning electrochemical microscopy.V. A study of the conductivity of a polypyrrole film. J Electrochem Soc 137 (5): 1481.
52. Serebrennikova, I., and H.S. White. 2001. Scanning electrochemical microscopy of electroactive defect sites in the native oxide film on aluminum. Electrochem Solid-State Lett 4 (1): B4.
53. Seegmiller, J.C., and D.A. Buttry. 2003. A SECM study of heterogeneous redox activity at AA2024 surfaces. J Electrochem Soc 150 (9): B413.
54. Lister, T.E., and P.J. Pinhero. 2002. Scanning electrochemical microscopy study of corrosion dynamics on type 304 stainless steel. Electrochem Solid-State Lett 5 (11): B33.
55. Lister, T.E., and P.J. Pinhero. 2003. The effect of localized electric fields on the detection of dissolved sulfur species from type 304 stainless steel using scanning electrochemical microscopy. Electrochim Acta 48 (17): 2371.
56. Rossi, A., et al. 2000. XPS, AES and ToF-SIMS investigation of surface films and the role of inclusions on pitting corrosion in austenitic stainless steels. Surf Interface Anal 29 (7): 460.
57. Tallman, D.E., et al. 2002. Direct electrodeposition of polypyrrole on aluminum and aluminum alloy by electron transfer mediation. J Electrochem Soc 149 (3): C173.
58. Chen, G., D.E. Tallman, and G.P. Bierwagen. 2004. Unusual microstructures formed during the mediated electrodeposition of polypyrrole on Al 2024-T3 at low current densities. J Solid State Electrochem 8 (7): 505.
59. Yang, X.F., et al. 2002. Electrodeposition of polypyrrole on aluminum alloy. In Proceedings of the International Conference on Surface Modification Technologies, 15th, 119. Indianapolis, IN.
60. Idla, K., et al. 1997. An XPS and AFM study of polypyrrole coating on mild steel. Surf Interface Anal 25 (11): 837.
61. Barisci, J.N., et al. 2000. Characterization of the topography and surface potential of electrode-posited conducting polymer films using atomic force and electric force microscopies. Electrochim Acta 46 (4): 519.
62. Layson, A., S. Gadad, and D. Teeters. 2002. Resistance measurements at the nanoscale: Scanning probe AC impedance spectroscopy. In Abstracts of Papers, 223rd ACS National Meeting. Orlando, FL., pp. COLL.
63. Posdorfer, J., and B. Wessling. 2000. Experimental evidence for passivation by the organic metal. Polym Prepr Am Chem Soc Div Polym Chem 41 (2): 1735.
64. Semenikhin, O.A., et al. 1996. Atomic force microscopy and Kelvin probe force microscopy evidence of local structural inhomogeneity and nonuniform dopant distribution in conducting polybithiophene. J Phys Chem 100 (48): 18603.
65. Ashcroft, N.W., and N.D. Mermin. 1976. Solid state physics. New York, NY: Holt, Rinehart and Winston.
66. Petr, A., et al. 2004. Electrochemical adjustment of the work function of a conducting polymer. Chem Phys Lett 385 (1,2): 140.
67. Heeger, A.J. 2001. Nobel lecture: Semiconducting and metallic polymers: The fourth generation of polymeric materials. Rev Modern Phys 73 (3): 681.
68. Lide, D.R. 2002. CRC handbook of chemistry and physics, 83rd ed., 2664. Boca Raton, FL: CRC Press.
69. Nazarov, A.P., and D. Thierry. 2004. Scanning Kelvin probe study of metal=polymer interfaces. Electrochim Acta 49 (17–18): 2955.
70. Epstein, A.J., et al. 1999. Corrosion protection of aluminum and aluminum alloys by polyanilines: A potentiodynamic and photoelectron spectroscopy study. Synth Met 102 (1–3): 1374.
71. Fahlman, M., et al. 2003. Iron–polyaniline interfaces: Implications for corrosion protection. In Electroactive polymers for corrosion control, eds. P. Zarras, J.D. Stenger-Smith and Y. Wei, 76. American Chemical Society.
72. Strounina, E.V., et al. 2003. Conformational changes in sulfonated polyaniline caused by metal salts and OH. Synth Met 135–136:289.
73. Innis, P.C., et al. 2000. Electrohydrodynamic polymerisation of water-soluble poly((4-(3-pyrro-lyl))butane sulfonate). Polymer 41 (11): 4065.
74. Holness, R.J., et al. 2005. Polyaniline inhibition of corrosion-driven organic coating cathodic delamination on iron. J Electrochem Soc 152 (2): B73.
75. Nagaoka, T., Z. Chen, and H. Nakao. 1999. Application of conducting polymers to analytical chemistry. Bunseki Kagaku 48 (3): 329.
76. Juttner, K., et al. 2001. Nano-scale conducting polymers as ion exchangers and electrocatalyst support. In Proceedings—Electrochemical Society, Volume 2001-23 (Energy and Electrochemical Processes for a Cleaner Environment), 428.
77. Deslouis, C., B. Garcia-Renaud, and N.T. Le Hien. 2001. Composite oxide=cp or large size anions=cp films as active protective coatings. Case of polypyrrole. Proc Electrochem Soc 2001-22 (Corrosion and Corrosion Protection), 596.
78. Nguyen Thi Le, H., et al. 2002. Corrosion protection of iron by polystyrenesulfonate-doped polypyrrole films. J Appl Electrochem 32 (1):105.
79. Hien, N.T.L., et al. 2005. Role of doping ions in the corrosion protection of iron by polypyrrole films. Electrochim Acta 50 (7–8): 1747.
80. Maksymiuk, K. 1996. Charge transfer reactions between conducting polymers and redox systems from electrolyte solutions. Relation between electron transfer kinetics and formal potentials of reacting species.Pol J Chem 70 (1): 126.
81. Ouyang, J., and Y. Li. 1996. Influence of the doped counteranions on the penetration of Hþ cations through poly(n-methylpyrrole). J Appl Polym Sci 59 (12): 1827.
82. Bidan, G., M. Lapkowski, and J.P. Travers. 1989. Hybridization of various conducting polymers with heteropolyanions: Conductivity, electrochemical and electrocatalytic properties. Synth Met 28 (1–2): C113.
83. Khomenko, V.G., V.Z. Barsukov, and A.S. Katashinskii. 2005. The catalytic activity of conducting polymers toward oxygen reduction. Electrochim Acta 50 (7–8): 1675.
84. Qu, L., et al. 2003. Electrochemical growth of polypyrrole microcontainers. Macromolecules 36 (4): 1063.
85. Fujita, J., and M.M. Hyland. 2003. Polyaniline coatings for aluminum: Preliminary study of bond and anti-corrosion. Int J Modern Phys B 17 (8 & 9, Pt. 1): 1164.
86. Ogurtsov, N.A., et al. 2004. Corrosion inhibition of aluminum alloy in chloride mediums by undoped and doped forms of polyaniline. Synth Met 143 (1): 43.
87. Gasparac, R., and C.R. Martin. 2002. The effect of protic doping level on the anticorrosion characteristics of polyaniline in sulfuric acid solutions. J Electrochem Soc 149 (9): B409.
88. Ahmad, N., S. Naseer, and G. Bett. 2004. Inhibition of corrosion of mild steel with the exploitation of emeraldine base and some pretreatments. J Indian Chem Soc 81 (9): 770.
89. Wang, X., et al. 2000. Corrosion protection on mild steel using polyaniline emeraldine base by solvent free technique. Polym Prepr Am Chem Soc Div Polym Chem 41 (2):1752.
90. Jing, X., Y. Wang, and J. Qiang. 2004. Anti-corrosion property of emeraldine base form of polyaniline. Zhongguo Fushi Yu Fanghu Xuebao 24 (5): 301.
91. Wang, Y., and X. Jing. 2004. Preparation of an epoxy=polyaniline composite coating and its passivation effect on cold rolled steel. Polym J Tokyo Jpn 36 (5): 374.
92. Fahlman, M., S. Jasty, and A.J. Epstein. 1997. Corrosion protection of iron=steel by emeraldine base polyaniline: An x-ray photoelectron spectroscopy study. Synth Met 85 (1–3): 1323.
93. Spinks, G.M., A.J. Dominis, and G.G. Wallace. 2003. Comparison of emeraldine salt, emeraldine base, and epoxy coatings for corrosion protection of steel during immersion in a saline solution. Corrosion Houston, TX, United States 59 (1): 22.
94. Mirmohseni, A., and A. Oladegaragoze. 2000. Anti-corrosive properties of polyaniline coating on iron. Synth Met 114 (2): 105.
95. Jasty, S., and A.J. Epstein. 1995. Corrosion prevention capability of polyaniline (emeraldine base and salt): An XPS study. Polym Mater Sci Eng 72:565.
96. Kus, E., et al. 2004. Evaluation of the protective properties of chromate-free BAMPPV-based polymer coatings using electrochemical impedance spectroscopy (EIS). Polym Prepr Am Chem Soc Div Polym Chem 45 (2): 207.
97. Zarras, P., et al. 2005. Poly (2, 5-bis(n-methyl-n-hexylamino) phenylene vinylene), a new smart conjugated polymer coating: Synthesis, properties, corrosion prevention using x-ray photoelectron spectroscopy study. Polym Prepr Am Chem Soc Div Polym Chem 46 (1): 535.
98. Tiitu, M., et al. 2005. Aminic epoxy resin hardeners as reactive solvents for conjugated polymers: Polyaniline base=epoxy composites for anticorrosion coatings. Polymer 46 (18): 6855.
99. Egelhaaf, H.J., et al. 1997. Influence of oxygen doping on the photoconductivity of p-conjugated molecules. Synth Met 84 (1–3): 897.
100. Kim, I.T., and R.L. Elsenbaumer. 1997. Synthesis, characterization and properties of poly(1-hexylpyrrylene vinylene). Synth Met 85 (1–3): 1345.
101. Dominis, A.J., G.M. Spinks, and G.G. Wallace. 2003. Comparison of polyaniline primers prepared with different dopants for corrosion protection of steel. Prog Org Coat 48 (1): 43.
102. Kinlen, P.J., Y. Ding, and D.C. Silverman. 2002. Corrosion protection of mild steel using sulfonic and phosphonic acid-doped polyanilines. Corrosion 58 (6): 490.
103. Kinlen, P.J., C.R. Graham, and Y. Ding. 2004. Corrosion protection of aluminum alloys by controlled release of inhibitors from inherently conductive polymer coatings. Polym Prepr Am Chem Soc Div Polym Chem 45 (2): 146.
104. Kendig, M., and M. Hon. 2004. Environmentally triggered release of oxygen-reduction inhibitors from inherently conducting polymers. Corrosion 60 (11): 1024.
105. Kinlen, P.J. 2005. Electroactive polymers and Smart coatings for corrosion inhibition of aluminum alloys. In Smart Coatings 2005, Orlando, FL.
106. de Souza, S., et al. 2001. Polyaniline based acrylic blends for iron corrosion protection. Electrochem Solid-State Lett 4 (8): B27.
107. Thompson, K.G., and B.C. Benicewicz. 2003. Corrosion-protective coatings from electroactive polymers. In Electroactive polymers for corrosion control, eds. P. Zarras, J.D. Stenger-Smith, and Y. Wei, 18. Washington DC: American Chemical Society.
108. Wallace, G.G., et al. 2003. Factors influencing the performance of inherently conducting polymers as corrosion inhibitors: The dopant. In Electroactive polymers for corrosion control, eds. P. Zarras, J.D. Stenger-Smith, and Y. Wei, 103. Washington DC: American Chemical Society.
109. Torresi, R.M., et al. 2005. Galvanic coupling between metal substrate and polyaniline acrylic blends: Corrosion protection mechanism. Electrochim Acta 50 (11): 2213.
110. Kendig, M., M. Hon, and L. Warren. 2003. Smart corrosion inhibiting coatings. Prog Org Coat 47 (3–4): 183.
111. Kendig, M., and C. Yan. 2004. Critical concentrations for selected oxygen reduction reaction inhibitors. J Electrochem Soc 151 (12): B679.
112. Bierwagen, G., et al. 2002. Fundamentals of the measurement of corrosion protection and the prediction of its lifetime in organic coatings. ACS Symp Ser 805 (Service life prediction): 316.
113. Gelling, V.J., et al. 2001. Electroactive-conducting polymers for corrosion control 4. Studies of poly(3-octyl pyrrole) and poly(3-octadecyl pyrrole) on aluminum 2024-T3 alloy. Prog Org Coat 43 (1–3): 149.
114. Tallman, D.E., Y. Pae, and G.P. Bierwagen. 2000. Conducting polymers and corrosion: Part 2— polyaniline on aluminum alloys. Corrosion Houston 56 (4): 401.
115. Truong, V.T., et al. 2000. Corrosion protection of magnesium by electroactive polypyrrole=paint coatings. Synth Met 110 (1): 7.
116. Bobacka, J., et al. 2004. All-solid-state ion sensors using conducting polymers as ion-to-electron transducers. Am Lab (Shelton, CT, United States) 36 (3): 13.
117. Ashraf, S.A., et al. 1996. Bulk electropolymerization of alkylpyrroles. Polymer 37 (13): 2811.
118. Bryce, M.R., et al. 1987. Soluble, conducting polymers from 3-substituted thiophenes and pyrroles. J Chem Soc Chem Commun (6): 466.
119. Wei, Y., R. Hariharan, and S.A. Patel. 1990. Chemical and electrochemical copolymerization of aniline with alkyl ring-substituted anilines. Macromolecules 23 (3): 758.
120. Gazotti, W.A. Jr., and M.-A. De Paoli. 1996. High yield preparation of a soluble polyaniline derivative. Synth Met 80 (3): 263.
121. Wallace, G.G., P. Innis, and D. Zhou. 1998. Australia WO 9838224, 1998, Hydrodynamic electro-processing of soluble conducting polymers. Feb. 27.
122. Chayer, M., K. Faied, and M. Leclerc. 1997. Highly conducting water-soluble polythiophene derivatives. Chem Mater 9 (12): 2902.
123. Wei, X.L., et al. 1996. Synthesis and physical properties of highly sulfonated polyaniline. J Am Chem Soc 118 (11): 2545.
124. Fahlman, M., et al. 2000. Polyaniline-metal interfaces: Implications on corrosion protection of steel and aluminum alloys. Polym Prepr Am Chem Soc Div Polym Chem 41 (2): 1753.
125. Lee, J.Y., D.Y. Kim, and C.Y. Kim. 1995. Synthesis of soluble polypyrrole of the doped state in organic solvents. Synth Met 74 (2): 103.
126. Lee, J.Y., et al. 1997. Synthesis and characterization of soluble polypyrrole. Synth Met 84 (1–3): 137.
127. Cao, Y., J. Qiu, and P. Smith. 1995. Effect of solvents and co-solvents on the processibility of polyaniline: I. Solubility and conductivity studies. Synth Met 69 (1–3): 187.
128. Neoh, K.G. et al. 1995. Polyaniline treated with organic acids: Doping characteristics and stability. Synth Met 73 (3): 209.
129. Aldissi, M., and S.P. Armes. 1991. Colloidal dispersions of conducting polymers. Prog Org Coat 19 (1): 21.
130. Barisci, J.N., et al. 1997. Electrochemical preparation of polypyrrole colloids using a flow cell. Colloids Surf A 126 (2–3): 129.
131. McCarthy, G.P., et al. 1997. Synthesis and characterization of carboxylic acid-functionalized poly-pyrrole–silica microparticles using a 3-substituted pyrrole comonomer. Langmuir 13 (14): 3686.
132. Aboutanos, V., et al. 1999. Electrochemical preparation of chiral polyaniline nanocomposites. Synth Met 106 (2): 89.
133. Wessling, B. 2003. Effective corrosion protection with the organic metal polyaniline: Basic principles and recent progress. In Electroactive polymers for corrosion control, eds. P. Zarras, J.D. Stenger-Smith, and Y. Wei, 34. Washington DC: American Chemical Society.
134. Wiersma, A.E., L.M.A. vd Steeg, and T.J.M. Jongeling. 1995. Waterborne core-shell dispersions based on intrinsically conducting polymers for coating applications. Synth Met 71 (1–3): 2269.
135. Aboutanos, V., L.A.P. Kane-Maguire, and G.G. Wallace. 2000. Electrosynthesis of polyurethane-based core-shell pan.(þ)-HCSA colloids. Synth Met 114 (3): 313.
136. Eisazadeh, H., G. Spinks, and G.G. Wallace. 1993. Conductive electroactive paint containing polypyrrole colloids. Mater Forum 17 (3): 241.
137. Wessling, B. 2003. Progress in science and technology of polyaniline and poly-ethylenedioxythio-phene. Synth Met 135–136: 265.
138. Wessling, B. 1995. Critical shear rate—the instability reason for the creation of dissipative structures in polymers. Z Phys Chem Munich 191 (1): 119.
139. Heeger, A.J. 1995. Self-assembled networks of conducting polyaniline: A new class of conducting polymer blends. Trends Polym Sci Cambridge UK 3 (2): 39.
140. Rout, T.K., et al. Development of conducting polyaniline coating: A novel approach to superior corrosion resistance. Surf Coat Technol 167 (1): 16.
141. Samui, A.B., et al. 2003. Study of polyaniline containing paint for corrosion prevention. Prog Org Coat 47 (1): 1.
142. Ruckenstein, E., and S. Yang. 1993. Processable conductive polypyrrole=poly(alkyl methacrylate) composites prepared by an emulsion pathway. Polymer 34 (22): 4655.
143. Iroh, J.O., et al. 2004. Electrochemical behavior of conducting polymer=polyimide composite. Surf Eng 20 (2): 93.
144. Mirmohseni, A., K. Valiegbal, and G.G. Wallace. 2003. Preparation and characterization of a polyaniline=poly(butyl acrylate–vinyl acetate) composite as a novel conducting polymer composite. J Appl Polym Sci 90 (9): 2525.
145. Mirmohseni, A., and G.G. Wallace. 2003. Preparation and characterization of processable electro-active polyaniline–polyvinyl alcohol composite. Polymer 44 (12): 3523.
146. Meneguzzi, A., et al. 2001. Electroactive poly(aromatic amine) films for iron protection in sulfate medium. J Electrochem Soc 148 (4): B121.
147. Nguyen, T.D., et al. 2004. Conducting polymers and corrosion PPy-PPy-PDAN composite films. J Electrochem Soc 151 (6): B325.
148. Rajagopalan, R., and J.O. Iroh. 2002. Corrosion performance of polyaniline–polypyrrole composite coatings applied to low carbon steel. Surf Eng 18 (1): 59.
149. Vang, C., et al. 2002. Conductive polymer blend composites for corrosion inhibition. Polym Prepr Am Chem Soc Div Polym Chem 43 (1): 401.
150. Berry, B.C., A.U. Shaikh, and T. Viswanathan. 2003. Lignosulfonic acid-doped polyaniline (ligno-pani) for the corrosion prevention of cold-rolled steel. In Electroactive polymers for corrosion control, eds. P. Zarras, J.D. Stenger-Smith, and Y. Wei, 182. Washington DC: American Chemical Society.
151. Garcia, B., et al. 2002. Oxide=polypyrrole composite films for corrosion protection of iron. J Electrochem Soc 149 (12): B560.
152. Domyo, T., M. Ueda, and T. Ohtsuka. 2003. Polypyrrole–polymolybdate composite film for the corrosion protection of steels. Zairyo to Kankyo 52 (8): 421.
153. Ferreira, C.A., S.C. Domenech, and P.C. Lacaze. 2001. Synthesis and characterization of polypyr-role=TiO2 composites on mild steel. J Appl Electrochem 31 (1): 49.
154. Lenz, D.M., M. Delamar, and C.A. Ferreira. 2003. Application of polypyrrole=TiO2 composite films as corrosion protection of mild steel. J Electroanal Chem 540:35.
155. Paloumpa, I., et al. 2004. Mechanisms to inhibit corrosion of Al alloys by polymeric conversion coatings. Surf Coat Technol 180–181:308.
156. Kulesza, P.J. et al. 2001. Corrosion protection by surface modification with conducting polymer based films. Proceedings of the Electrochemical Society 2001-22 (Corrosion and Corrosion Protection), 587.
157. Mariusz, G., et al. 2003. Protection of steel against corrosion in aggressive medium by surface modification with multilayer polyaniline-based composite film. J Electrochem Soc 150 (6): B249.
158. Shah, K., et al. 2001. Corrosion protection properties of polyaniline–polypyrrole composite coatings on Al 2024. Surf Eng 17 (5): 405.
159. Zhu, Y., K. Shah, and J.O. Iroh. 2002. Corrosion protection of Al 2024-T3 by particulate filled conducting polymer coatings., In Surface Modification Technologies XV, 143. Proceedings of the International Conference on Surface Modification Technologies, 15th, Indianapolis, IN.
160. Yeh, J.-M., et al. 2002. Enhancement of corrosion protection effect of poly(o-ethoxyaniline) via the formation of poly(o-ethoxyaniline)-clay nanocomposite materials. Polymer 43 (9): 2729.
161. Yeh, J.-M., C.-P. Chin, and S. Chang. 2003. Enhanced corrosion protection coatings prepared from soluble electronically conductive polypyrrole-clay nanocomposite materials. J Appl Polym Sci 88 (14): 3264.
162. Benicewicz, B.C., and R. Chen. 2000. Synthesis and characterization of polymers with oligoaniline side chains. Polym Prepr Am Chem Soc Div Polym Chem 41 (2): 1733.
163. Chen, R., and B.C. Benicewicz. 2003. Synthesis and characterization of polymers with oligoaniline side chains. In Electroactive polymers for corrosion control, eds. P. Zarras, J.D. Stenger-Smith, and Y. Wei, 126. Washington, DC: American Chemical Society.
164. Chen, R., V. Raghunadh, and B.C. Benicewicz. 2004. New electroactive polymers for anti-corrosion coatings. Polym Prepr Am Chem Soc Div Polym Chem 45 (2): 151.
165. Goldschmidt, A., and H.-J. Streitberger. 2003. BASF handbook on basics of coating technology. Hannover, Germany: Vincentz Network.
166. Huerta-Vilca, D., S.R. Moraes, and A. Jesus Motheo. 2005. Aspects of polyaniline electrodeposition on aluminium. J Solid State Electrochem 9 (6): 416.
167. Shah, K., and J.O. Iroh. 2003. Adhesion of electrochemically formed conducting polymer coatings on Al-2024. Surf Eng 20 (1): 53.
168. Beck, F., and P. Huelser. 1990. Electrodeposition of polypyrrole on aluminum from nonaqueous solutions. J Electroanal Chem Interfacial Electrochem 280 (1): 159.
169. Huelser, P., and F. Beck. 1990. Electrodeposition of polypyrrole layers on aluminum from aqueous electrolytes. J Appl Electrochem 20 (4): 596.
170. Beck, F., P. Huelser, and R. Michaelis. 1992. Anodic deposition of polypyrrole on iron, aluminum, and other commodity metals. Bull Electrochem 8 (1): 35.
171. Beck, F., et al. 1994. Filmforming electropolymerization of pyrrole on iron in aqueous oxalic acid. Electrochim Acta 39 (2): 229.
172. Beck, F., V. Haase, and M. Schroetz. 1996. Polyheteroaromatic layers on commodity metals (CIPL)— passivation, corrosion protection, AIP Conference Proceedings 354 (Organic Coatings), 115.
173. Lacroix, J.C., et al. 2000. Aniline electropolymerization on mild steel and zinc in a two-step process. J Electroanal Chem 481 (1): 76.
174. Nguyen, T.D., et al. 1999. Polyaniline electrodeposition from neutral aqueous media: Application to the deposition on oxidizable metals. Synth Met 102 (1–3): 1388.
175. Petitjean, J., et al. 1999. Ultra-fast electropolymerization of pyrrole in aqueous media on oxidizable metals in a one-step process. J Electroanal Chem 478 (1,2): 92.
176. Aeiyach, S., et al. 2003. Conjugated organic polymers for anticorrosion coating. ACS Symposium Series 832 (Conducting Polymers and Polymer Electrolytes), 128.
177. Ferreira, C.A., et al. 1999. Appraisal of the polypyrrole=cataphoretic paint bilayer system as a protective coating for metals. J Appl Electrochem 29 (2): 259.
178. Rammelt, U., P.T. Nguyen, and W. Plieth. 2001. Corrosion protection by films of intrinsically conducting polymers. Proceedings of Electrochemical Society 2001-22 (Corrosion and Corrosion Protection), 604.
179. Tuken, T., B. Yazici, and M. Erbil. 2004. The use of polythiophene for mild steel protection. Prog Org Coat 51 (3): 205.
180. Sazou, D. 2001. Electrodeposition of ring-substituted polyanilines on Fe surfaces from aqueous oxalic acid solutions and corrosion protection of Fe. Synth Met 118 (1–3): 133.
181. Saidman, S.B., and J.B. Bessone. 2002. Electrochemical preparation and characterization of poly-pyrrole on aluminum in aqueous solution. J Electroanal Chem 521 (1–2): 87.
182. Fenelon, A.M., and C.B. Breslin. 2002. The electrochemical synthesis of polypyrrole at a copper electrode: Corrosion protection properties. Electrochim Acta 47 (28): 4467.
183. Fenelon, A.M., and C.B. Breslin. 2003. Corrosion protection properties afforded by an in situ electropolymerized polypyrrole layer on CuZn. J Electrochem Soc 150 (11): B540.
184. Fenelon, A.M., and C.B. Breslin. 2003. The electropolymerization of pyrrole at a CuNi electrode: Corrosion protection properties. Corros Sci 45 (12): 2837.
185. Abrantes, L.M., A.C. Cascalheira, and P.J. Marques. 2002. Anticorrosive protection of nickel and copper by polymeric coatings—influence of experimental conditions. Corrosao e Proteccao de Materiais 21 (1): 14.
186. Tuken, T., B. Yazici, and M. Erbil. 2004. The electrochemical synthesis and corrosion performance of polypyrrole on brass and copper. Prog Org Coat 51 (2): 152.
187. Tuken, T., et al. 2004. Polypyrrole and polyaniline topcoats on nickel coated mild steel. Prog Org Coat 51 (1): 27.
188. Tallman, D.E., et al. 2003. Electron transfer mediated deposition of conducting polymers on active metals. Synth Met 135–136:33.
189. Vang, C., et al. 2002. Electrocatalytic polymerization of polypyrrole on Al 2024-T3 alloy. Polym Prepr Am Chem Soc Div Polym Chem 43 (1): 742.
190. Tallman, D.E., et al. 2004. Electrodeposition of conducting polymers on active metals by electron transfer mediation. Curr Appl Phys 4:137.
191. Levine, K.L., D.E. Tallman, and G.P. Bierwagen. 2005. The mediated electrodeposition of poly-pyrrole on aluminium alloy. Aust J Chem 58 (4): 294.
192. Zinger, B. 1988. Catalytic electrosynthesis of conducting polymers. J Electroanal Chem 244:115.
193. Parks, G.A. 1965. The isoelectric points of solid oxides, solid hydroxides, and aqueous hydroxo complex systems. Chem Rev 65 (2): 177.
194. 2 nanowire templates. J Mater Res 18 (12): 2756.
195. Park, J.-C., et al. 1999. A new synthetic route to wustite. Bull Korean Chem Soc 20 (9): 1005.
196. Leygraf, C. 2003. Atmospheric corrosion. In Corrosion and oxide films, eds. M. Stratmann, and G.S. Frankel, 191. Weinheim, Germany: Wiley–VCH Verlag GmbH & Co. KgaA.
197. Serebrennikova, I., S. Lee, and H.S. White. 2002. Visualization and characterization of electroactive defects in the native oxide film on aluminum. Faraday Discussions 121 (Dynamic Electrode Surface), 199.
198. Samuels, L.E. 2003. Metallographic polishing by mechanical methods, 4th ed. 400. Materials Park, OH: ASM International.
199. Chidambaram, D., and G.P. Halada. 2001. Infrared microspectroscopic studies on the pitting of AA2024-T3 induced by acetone degreasing. Surf Interface Anal 31 (11): 1056.
200. Bol’shakov, L.A., et al. 2002. Kinetics and optimization of aluminum surface degreasing by ultrasound. Izv Vyssh Uchebn Zaved Khim Khim Tekhnol 45 (5): 31.
201. Oh, H.-J., K.-W. Jang, and C.-S Chi. 1999. Impedance characteristics of oxide layers on aluminium. Bull Korean Chem Soc 20 (11): 1340.
202. Breslin, C.B., A.M. Fenelon, and K.G. Conroy. 2005. Surface engineering: Corrosion protection using conducting polymers. Mater Des 26 (3): 233.
203. Cook, A., A. Gabriel, and N. Laycock. 2004. On the mechanism of corrosion protection of mild steel with polyaniline. J Electrochem Soc 151 (9): B529.
204. Ding, K., et al. 2002. Polyaniline and polyaniline-thiokol rubber composite coatings for the corrosion protection of mild steel. Mater Chem Phys 76 (2): 137.
205. Fenelon, A.M., and C.B. Breslin. 2004. Polyaniline-coated iron: Studies on the dissolution and electrochemical activity as a function of pH. Surf Coat Technol 190 (2–3): 264.
206. Huerta-Vilca, D., et al. 2004. PAni as prospective replacement of chromium conversion coating in the protection of steels and aluminum alloys. Mol Cryst Liq Cryst 415:229.
207. Huh, J., E. Oh, and J. Cho. 2003. Electrochemistry and corrosion characteristics of polyaniline dispersion coating for protection of steels. J Korean Electrochem Soc 6 (2): 113.
208. Iroh, J.O., et al. 2003. Electrochemical synthesis: A novel technique for processing multifunctional coatings. Prog Org Coat 47 (3–4): 365.
209. Martyak, N.M., et al. 2002. Corrosion of polyaniline-coated steel in high pH electrolytes. Sci Technol Adv Mater 3 (4): 345.
210. Meneguzzi, A., M.C. Pham, and C.A. Ferreira. 2002. Electrosynthesis of a double layered intrinsically conducting polymer composite on iron substrates. Mol Cryst Liq Cryst 374:583.
211. Moraes, S.R., D. Huerta-Vilca, and A.J. Motheo. 2003. Corrosion protection of stainless steel by polyaniline electrosynthesized from phosphate buffer solutions. Prog Org Coat 48 (1): 28.
212. Nguyen, T.D., et al. 2004. Mechanism for protection of iron corrosion by an intrinsically electronic conducting polymer. J Electroanal Chem 572 (2): 225.
213. Tan, C.K., and D.J. Blackwood. 2002. Corrosion protection by multilayered conducting polymer coatings. Corros Sci 45 (3): 545.
214. Laco, J.I.I., F.C. Villota, and F.L. Mestres. 2005. Corrosion protection of carbon steel with thermoplastic coatings and alkyd resins containing polyaniline as conductive polymer. Prog Org Coat 52 (2): 151.
215. Gasparac, R., and C.R. Martin. 2001. Investigations of the mechanism of corrosion inhibition by polyaniline. Polyaniline-coated stainless steel in sulfuric acid solution. J Electrochem Soc 148 (4): B138.
216. Nguyen, T.D., M. Keddam, and H. Takenouti. 2003. Device tostudy electrochemistry of ironat a defect of protective coating of electronic conducting polymer. Electrochem SolidState Lett 6 (8): B25.
217. Asan, A., and M. Kabasakaloglu. 2003. Electrochemical and corrosion behaviors of mild steel coated with polypyrrole. Mater Sci (Translation of Fiziko-Khimichna Mekhanika Materialiv) 39 (5): 643.
218. Hammache, H., L. Makhloufi, and B. Saidani. 2003. Corrosion protection of iron by polypyrrole modified by copper using the cementation process. Corros Sci 45 (9): 2031.
219. Herrasti, P., et al. 2004. Electrochemical and mechanical properties of polypyrrole coatings on steel. Electrochim Acta 49 (22–23): 3693.
220. Nguyen, T.L.H., et al. 2004. Raman spectroscopy analysis of polypyrrole films as protective coatings on iron. Synth Met 140 (2–3): 287.
221. Ocon, P., et al. 2005. Corrosion performance of conducting polymer coatings applied on mild steel. Corros Sci 47 (3): 649.
222. Prissanaroon, W., et al. 2002. Surface and electrochemical study of DBSA-doped polypyrrole films grown on stainless steel. Surf Interface Anal 33 (8): 653.
223. Tuken, T., et al. 2004. The corrosion protection of mild steel by polypyrrole=polyphenol multilayer coating. Corrosion Sci 46 (11): 2743.
224. Tuken, T., et al. 2004. The use of polyindole for mild steel protection. Prog Org Coat 50 (4): 273.
225. Tuken, T., B. Yazici, and M. Erbil. 2004. A new multilayer coating for mild steel protection. ProgOrg Coat 50 (2): 115.
226. Wlodarczyk, R., et al. 2004. Protection of carbon steel against corrosion in aggressive medium by surface modification with polypyrrole film containing hexacyanoferrate. In Trends in Electrochemistry and Corrosion at the Beginning of the 21st Century, eds. E. Brillas and P.L. Cabot, 897. Barcelona: Universitat de Barcelona.
227. Rammelt, U., P.T. Nguyen, and W. Plieth. 2003. Corrosion protection by ultrathin films of conducting polymers. Electrochim Acta 48 (9): 1257.
228. Conroy, K.G., and C.B. Breslin. 2003. The electrochemical deposition of polyaniline at pure aluminum: Electrochemical activity and corrosion protection properties. Electrochim Acta 48 (6): 721.
229. Seegmiller, J.C., et al. 2005. Mechanism of action of corrosion protection coating for AA2024-T3 based on poly(aniline)-poly(methylmethacrylate) blend. J Electrochem Soc 152 (2): B45.
230. Yang, S.C., et al. 2003. Electroactive polymer for corrosion inhibition of aluminum alloys, in Electroactive polymers for corrosion control, eds. P. Zarras, J.D. Stenger-Smith and Y. Wei, 196. Washington, DC: American Chemical Society.
231. Zhang, A., and X. Guo. 2003. Preparation of Al=Al2O3=PPy and its characteristic of impedance in a chloride-contained solution. Fushi Yu Fanghu 24 (10): 428.
232. Williams, G., et al. 2004. Inhibition of corrosion-driven organic coating delamination on zinc by polyaniline. Electrochem Commun 6 (6): 549.
233. Martins, J.I., et al. 2004. Polypyrrole coatings as a treatment for zinc-coated steel surfaces against corrosion. Corros Sci 46 (10): 2361.
234. Cascalheira, A.C., and L.M. Abrantes. 2004. Polypyrrole films for copper corrosion protection. Corrosao e Proteccao de Materiais 23 (3): 6.
235. Patil, S., S.R. Sainkar, and P.P. Patil. 2004. Poly(o-anisidine) coatings on copper: Synthesis, characterization, and evaluation of corrosion protection performance. Appl Surf Sci 225 (1–4): 204.
236. Jiang, Y.F., et al. 2003. Corrosion protection of polypyrrole electrodeposited on AZ91 magnesium alloys in alkaline solutions. Synth Met 139 (2): 335.