Wear of ceramic-on-carbon fiber-reinforced poly-ether ether ketone hip replacements

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 100 B, Issue 6, 2012, Pages 1459-1465

  Brockett, Claire L ^a   John, Gemma ^b   Williams, Sophie ^a   Jin, Zhongmin ^a   Isaac, Graham H ^a   Fisher, John ^a  

^a UNIVERSITY OF LEEDS   (United Kingdom)

^b Synthes Technical Center   (United Kingdom)

Author keywords

carbon fiber reinforced PEEK; friction; hip replacement; wear

Indexed keywords

BOUNDARY LUBRICATION CONDITIONS; FRICTION AND WEAR; FRICTION FACTORS; HIP REPLACEMENTS; OSTEOLYSIS; SURGICAL INTERVENTIONS; TOTAL HIP REPLACEMENT (THR); VOLUMETRIC WEAR RATES;

ARTHROPLASTY; CARBON FIBERS; CERAMIC MATERIALS; FRICTION; REINFORCEMENT; TRIBOLOGY; WEAR OF MATERIALS;

HIP PROSTHESES;

CARBON FIBER; COBALT; POLYETHERETHERKETONE;

ARTICLE; CERAMICS; FRICTION; HIP ARTHROPLASTY; LUBRICATION; MECHANICAL STRESS; OSTEOLYSIS; VOLUMETRY;

CARBON; CERAMICS; FRICTION; HIP PROSTHESIS; HUMANS; KETONES; MATERIALS TESTING; POLYETHYLENE GLYCOLS; WEIGHT-BEARING;

EID: 84863727997     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.32664     Document Type: Article

References (50)

1. Malchau H, Herberts P, Eisler T, Garellick G, Soderman P,. The Swedish total hip replacement register. J Bone Joint Surg Am 2002; 84: 2-20.
2. Bolton JD,. Problems with wear in artificial orthopaedic joint replacements: A review. Key Eng Mater 2002; 230-232: 447-454.
3. McKellop H, Shen F-w, Lu B, Campbell P, Salovey R,. Effect of sterilization method and other modifications on the wear resistance of acetabular cups made of ultra-high molecular weight polyethylene: A hip-simulator study. J Bone Joint Surg Am 2000; 82: 1708-1725.
4. Ingham E, Fisher J,. Biological reactions to wear debris in total joint replacement. Proc Inst Mech Eng Part H: J Eng Med 2000; 214: 21-37.
5. Jacobs CA, Christensen C, Greenwald S, McKellop H,. Clinical performance of highly cross-linked polyethylenes in total hip arthroplasty. J Bone Joint Surg Am 2007; 89: 2779-2786.
6. Anissian HL, Stark A, Gustafson A, Good V, Clarke IC,. Metal-on-metal bearing in hip prosthesis generates 100-fold less wear debris than metal-on-polyethylene. Acta Orthop Scand 1999: 578-582.
7. Nevelos JE, Ingham E, Doyle C, Nevelos AB, Fisher J,. Wear of HIPed and non-HIPed alumina-alumina hip joints under standard and severe simulator testing conditions. Biomaterials 2001; 22: 2191-2197.
8. Isaac GH, Brockett C, Breckon A, van der Jagt D, Williams S, Hardaker C, Fisher J, Schepers A,. Ceramic-on-metal bearings in total hip replacement: Whole blood metal ion levels and analysis of retrieved components. J Bone Joint Surg Br 2009; 91: 1134-1141.
9. Williams S, Schepers A, Isaac G, Hardaker C, Ingham E, Jagt Dvd, Breckon A, Fisher J,. The 2007 Otto Aufranc Award: Ceramic-on-metal hip arthroplasties: A comparative in vitro and in vivo study. Clin Orthop Relat Res 2007; 465: 23-32.
10. Affatato S, Bersaglia G, Rocchi M, Taddei P, Fagnano C, Toni A,. Wear behaviour of cross-linked polyethylene assessed in vitro under severe conditions. Biomaterials 2005; 26: 3259-3267.
11. Galvin AL, Tipper JL, Ingham E, Fisher J,. Nanometre size wear debris generated from crosslinked and non-crosslinked ultra high molecular weight polyethylene in artificial joints. Wear 2005; 259: 977-983.
12. Glyn-Jones S, Isaac S, Hauptfleisch J, McLardy-Smith P, Murray DW, Gill HS,. Does highly cross-linked polyethylene wear less than conventional polyethylene in total hip arthroplasty? A double-blind, randomized, and controlled trial using roentgen stereophotogrammetric analysis. J Arthroplasty 2008; 23: 337-343.
13. Capello WN, D'Antonio JA, Ramkrishnan R, Naughton M,. Continued improved wear with an annealed highly cross-linked polyethylene. Clin Orthop Related Res 2011; 469: 825-830.
14. Tower SS, Currier JH, Currier BH, Lyford KA, Van Citters DW, Mayor MB,. Rim cracking of the cross-linked longevity polyethylene acetabular liner after total hip arthroplasty. J Bone Joint Surg Am 2007; 89: 2212-2217.
15. Goldsmith AA, Dowson D, Isaac GH, Lancaster JG,. A comparative joint simulator study of the wear of metal-on-metal and alternative material combinations in hip replacements. Proc Inst Mech Eng Part H: J Eng Med 2000; 214: 39-47.
16. Ingham E, Fisher J,. The role of macrophages in osteolysis of total joint replacement. Biomaterials 2005; 26: 1271-1286.
17. Billi F, Benya P, Ebramzadeh E, Campbell P, Chan F, McKellop HA,. Metal wear particles: What we know, what we do not know, and why. SAS J 2009; 3: 133-142.
18. Pattyn CA, Lauwagie SN, Verdonk RC,. Whole blood metal ion concentrations in correlation with activity level in three different metal-on-metal bearings. J Arthroplasty 2011; 26: 58-64.
19. Sargeant A, Goswami T,. Hip implants-Paper VI-Ion concentrations. Mater Des 2007; 28: 155-171.
20. Yang J, Shen B, Zhou Z, Pei F, Kang P,. Changes in cobalt and chromium levels after metal-on-metal hip resurfacing in young, active Chinese patients. J Arthroplasty 2011; 26: 65-70.
21. Leslie I, Williams S, Anderson J, Isaac G, Ingham E, Fisher J,. Increased wear of hip surface replacements with high cup angle and head lateralisation in vitro. J Biomech 2008; 41 (Suppl 1): S6-S6.
22. Biant LC, Bruce WJM, van der Wall H, Walsh WR,. Infection or allergy in the painful metal-on-metal total hip arthroplasty? J Arthroplasty 2010; 25: 334.e11-334.e16.
23. Blumenfeld TJ, Bargar WL, Campbell PA,. A painful metal-on-metal total hip arthroplasty: A diagnostic dilemma. J Arthroplasty 2010; 25: 1168 e1-e4.
24. Kwon Y-M, Ostlere SJ, McLardy-Smith P, Athanasou NA, Gill HS, Murray DW,. "Asymptomatic" pseudotumors after metal-on-metal hip resurfacing arthroplasty: Prevalence and metal ion study. J Arthroplasty 2011; 26: 511-518.
25. Currier JH, Reinitz SD, Currier BH, Van Citters DW,. Ceramic squeaking: Retrieved hips and never implanted components show ceramic components alone emit the squeaking documented in vivo. In: Proceedings of the Orthopaedic Research Society, Las Vegas, USA, 2010. Paper 161.
26. Keurentjes JC, Kuipers RM, Wever DJ, Schreurs BW,. High incidence of squeaking in THAs with alumina ceramic-on-ceramic bearings. Clin Orthop Related Res 2008; 466: 1438-1443.
27. Walter WL, O'Toole GC, Walter WK, Ellis A, Zicat BA,. Squeaking in ceramic-on-ceramic hips: The importance of acetabular component orientation. Arthroplasty 2007; 22: 496-503.
28. Eickmann T, Manaka M, Clarke I, Gustafson A,. Squeaking and neck-socket impingement in a ceramic total hip arthroplasty. Key Eng Mater 2003: 849-852 (Trans Tech Publications Ltd., Sydney, NSW, Australia).
29. Kurtz SM, Devine JN,. PEEK biomaterials in trauma, orthopedic, and spinal implants. Biomaterials 2007; 28: 4845-4869.
30. Wang A, Lin R, Polineni VK, Essner A, Stark C, Dumbleton JH,. Carbon fiber reinforced polyether ether ketone composite as a bearing surface for total hip replacement. Tribol Int 1998; 31: 661-667.
31. Scholes SC, Unsworth A,. The wear performance of PEEK-OPTIMA based self-mating couples. Wear 2010; 268: 380-387.
32. Scholes S, Unsworth A,. Wear studies on the likely performance of CFR-PEEK/CoCrMo for use as artificial joint bearing materials. J Mater Sci: Mater Med 2009; 20: 163-170.
33. Scholes SC, Inman IA, Unsworth A, Jones E,. Tribological assessment of a flexible carbon-fibre-reinforced poly(ether-ether-ketone) acetabular cup articulating against an alumina femoral head. Proc Inst Mech Eng Part H: J Eng Med 2008; 222: 273-283.
34. Grupp TM, Utzschneider S, Schröder C, Schwiesau J, Fritz B, Maas A, Blömer W, Jansson V,. Biotribology of alternative bearing materials for unicompartmental knee arthroplasty. Acta Biomater 2010; 6: 3601-3610.
35. Harper ML, Dooris A, Paré PE,. The fundamentals of biotribology and its application to spine arthroplasty. SAS J 2009; 3: 125-132.
36. Brockett C, Williams S, Jin Z, Isaac G, Fisher J,. Friction of total hip replacements with different bearings and loading conditions. J Biomed Mater Res Part B: Appl Biomater 2007; 81B: 508-515.
37. Barbour P, Stone M, Fisher J,. A hip joint simulator study using simplified loading and motion cycles generating physiological wear paths and rates. Proc Inst Mech Eng Part H: J Eng Med 1999; 213: 455-467.
38. Scholes, Unsworth A, Hall RM, Scott R,. The effects of material combination and lubricant on the friction of total hip prostheses. Wear 2000; 241: 209-213.
39. Flanagan S, Jones E, Birkinshaw C,. In vitro friction and lubrication of large bearing hip prostheses. Proc Inst Mech Eng Part H: J Eng Med 2010; 224: 853-864.
40. Scholes, Unsworth A,. The effect of proteins on the friction and lubrication of artificial joints. Proc Inst Mech Eng Part H: J Eng Med 2006; 220: 687-693.
41. Dowson D,. New joints for the Millennium: Wear control in total replacement hip joints. Proc Inst Mech Eng Part H: J Eng Med 2001; 215: 335-358.
42. Brockett CL, Williams S, Isaac GH, Fisher J,. Effect of third body particles on the tribology and surface finish of COM, MOM and COC bearings. 55th Annual Meeting of the Orthopaedic Research Society, Las Vegas; 2009.
43. Davim JP, Marques N, Baptista AM,. Effect of carbon fibre reinforcement in the frictional behaviour of Peek in a water lubricated environment. Wear 2001; 251: 1100-1104.
44. Bergmann G, Graichen F, Rohlmann A, Verdonschot N, van Lenthe GH,. Frictional heating of total hip implants, part 1: Measurements in patients. J Biomech 2001; 34: 421-428.
45. Pritchett JW,. Heat generated by hip resurfacing prostheses: An in-vivo pilot study. J Long Term Eff Med Implants 2011; 21: 55-62.
46. Mai MT, Schmalzried TP, Dorey FJ, Campbell PA, Amstutz HC,. The contribution of frictional torque to loosening at the cement-bone interface in Tharies hip replacements. J Bone Joint Surg Am 1996; 78: 505-511.
47. Yao JQ, Blanchet TA, Murphy DJ, Laurent MP,. Effect of fluid absorption on the wear resistance of UHMWPE orthopedic bearing surfaces. Wear 2003; 255: 1113-1120.
48. Clarke IC, Starkebaum W, Hosseinian A, McGuire P, Okuda R, Salovey R, Young R,. Fluid-sorption phenomena in sterilized polyethylene acetabular prostheses. Biomaterials 1985; 6: 184-188.
49. Howling GI, Sakoda H, Antonarulrajah A, Marrs H, Stewart TD, Appleyard S, Rand B, Fisher J, Ingham E,. Biological response to wear debris generated in carbon based composites as potential bearing surfaces for artificial hip joints. J Biomed Mater Res Part B: Appl Biomater 2003; 67B: 758-764.
50. Utzschneider S, Becker F, Grupp TM, Sievers B, Paulus A, Gottschalk O, Jansson V,. Inflammatory response against different carbon fiber-reinforced PEEK wear particles compared with UHMWPE in vivo. Acta Biomater 2010; 6: 4296-4304.