Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts

Measurement: Journal of the International Measurement Confederation

Volumn 45, Issue 8, 2012, Pages 2153-2165

  Sahoo, Ashok Kumar ^a   Sahoo, Bidyadhar ^b  

^a KIIT UNIVERSITY   (India)

^b INDIRA GANDHI INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Chip morphology; Coated carbide; Cutting force; Economic analysis; Finish hard turning; Surface roughness; Tool wear

Indexed keywords

AISI 4340 STEEL; CATASTROPHIC FAILURES; CHIP MORPHOLOGIES; COATED CARBIDE INSERT; CUTTING CONDITIONS; CUTTING FORCES; CUTTING SPEED; ECONOMICAL FEASIBILITY; EXPERIMENTAL INVESTIGATIONS; FEED FORCES; FINISH HARD TURNING; FLANK WEAR; HARD MACHINING; HARD TURNING; HARDENED STEEL; MACHINING COSTS; REGRESSION MODEL; SURFACE ROUGHNESS MODEL; THRUST FORCES; TIN COATED CARBIDE; TOOL LIFE; TOOL WEAR; WEAR MECHANISMS;

CARBIDES; CUTTING; ECONOMIC ANALYSIS; MACHINABILITY; MORPHOLOGY; MULTILAYERS; REGRESSION ANALYSIS; SURFACE ROUGHNESS; TITANIUM NITRIDE; TRIBOLOGY; WEAR OF MATERIALS;

TURNING;

EID: 84863727835     PISSN: 02632241     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.measurement.2012.05.015     Document Type: Article

References (25)

1. W. Grzesik The role of coatings in controlling the cutting process when turning with coated indexable inserts J. Mater. Process. Technol. 179 1998 133 143 (Pubitemid 128408935)
2. D.I. Lalwani, N.K. Mehta, and P.K. Jain Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel J. Mater. Process. Technol. 206 2008 167 179
3. Y.W. Park Tool material dependence of hard turning on the surface quality Int. J. Korean Soc. f Prec. Eng. 3 1 2002 76 82
4. T. Ozel, Y. Karpat, L. Figueira, and J.P. Davim Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts J. Mater. Process. Technol. 189 2007 192 198 (Pubitemid 46529196)
5. Y. Sahin, and A.R. Motorcu Surface roughness model in machining hardened steel with cubic boron nitride cutting tool Int. J. Refract. Metals Hard Mater. 26 2008 84 90 (Pubitemid 350081057)
6. D. Singh, and P. Venkateswara Rao A surface roughness prediction model for hard turning process Int. J. Adv. Manuf. Technol. 32 2007 1115 1124 (Pubitemid 46645790)
7. V.N. Gaitonde, S.R. Karnik, L. Figueira, and J.P. Davim Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts Int. J. Refract. Metals Hard Mater. 27 2009 754 763
8. J.G. Lima, R.F. Ávila, A.M. Abrao, M. Faustino, and J.P. Davim Hard turning: AISI 4340 high strength alloy steel and AISI D2 cold work tool steel J. Mater. Process. Technol. 169 3 2005 388 395 (Pubitemid 41427070)
9. I. Asiltürk, and H. Akkus Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method Measurement 44 2011 1697 1704
10. A.K. Sahoo, and B.D. Sahoo Mathematical modeling and multi-response optimization using response surface methodology and grey based Taguchi method: an experimental investigation Int. J. Exp. Des. Process Optimis. 2 3 2011 221 242
11. J. Rech A multiview approach to the tribological characterisation of cutting tool coatings for steels in high-speed dry turning Int. J. Mach. Mach. Mater. 1 1 2006 27 44
12. C.H.R. Vikram Kumar, and B. Ramamoorthy Performance of coated tools during hard turning under minimum fluid application J. Mater. Process. Technol. 185 2007 210 216 (Pubitemid 46283405)
13. S. More Abhijeet, W. Jiang, W.D. Brown, and A.P. Malshe Tool wear and machining performance of cBN-TiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel J. Mater. Process. Technol. 180 2006 253 262 (Pubitemid 44301859)
14. M.Y. Noordin, D. Kurniawan, and S. Sharif Hard turning of stainless steel using wiper coated carbide tool Int. J. Prec. Technol. 1 1 2007 75 84
15. V.S. Sharma, S. Dhiman, R. Sehgal, and S.K. Sharma Estimation of cutting forces and surface roughness for hard turning using neural networks J. Intell. Manuf. 19 2008 473 483
16. CH.R. Vikram Kumar, P. Kesavan Nair, and B. Ramamoorthy Performance of TiCN and TiAlN tools in machining hardened steel under dry, wet and minimum fluid application Int. J. Mach. Mach. Mater. 3 1/2 2008 133 142 (Pubitemid 351454514)
17. W. Jiang, A.P. Malshe, and R. Calvin Goforth Cubic Boron Nitride (CBN) based nano composite coatings on cutting inserts with chip breakers for hard turning applications Surf. Coat. Technol. 200 2005 1849 1854 (Pubitemid 41762206)
18. J. G de Lima, R. F de Ávila, and A.M. Abra Turning of hardened AISI 4340 steel using coated carbide inserts Proc. IMechE, Part B: J. Eng. Manuf. 221 2007 1359 1366 (Pubitemid 350232152)
19. S. Basak, U.S. Dixit, and J.P. Davim Application of radial basis function neural networks in optimization of hard turning of AISI D2 cold-worked tool steel with a ceramic tool Proc. IMechE, Part B: J. Eng. Manuf. 221 2007 987 998 (Pubitemid 47477093)
20. M.A. Yallese, K. Chaoui, N. Zeghib, L. Boulanouar, and J. Rigal Hard machining of hardened bearing steel using cubic boron nitride tool J. Mater. Process. Technol. 209 2009 1092 1104
21. 3/TiC mixed ceramic tool based on the response surface methodology J. Mater. Process. Technol. 208 1-3 2008 532 541
22. H. Gökkaya, and M. Nalbant The effects of cutting tool coating on the surface roughness of AISI 1015 Steel depending on cutting parameters Turkish J. Eng. Env. Sci. 30 2006 307 316 (Pubitemid 46002326)
23. N.R. Dhar, S.V. Nanda Kishore, S. Paul, and A.B. Chattopadhyay The effects of cryogenic cooling on chips and cutting forces in turning AISI 1040 and AISI 4320 steels Proc. IMechE, Part B: J. Eng. Manuf. 216 2002 713 724 (Pubitemid 34590521)
24. Nilrudra Mandal, B. Doloi, B. Mondal, and Reeta Das Optimization of flank wear using Zirconia Toughened Alumina (ZTA) cutting tool: Taguchi method and Regression analysis Measurement 44 2011 2149 2155
25. M.C. Shaw Metal Cutting Principles 2005 Oxford University press New York