A multiview approach to the tribological characterisation of cutting tool coatings for steels in high-speed dry turning

International Journal of Machining and Machinability of Materials

Volumn 1, Issue 1, 2006, Pages 27-44

  Rech, J ^a  

^a UNIVERSITÉ DE LYON   (France)

Author keywords

cutting temperature; cutting tool coatings; sliding; tool chip interface; tribology; wear

Indexed keywords

EID: 38949155818     PISSN: 17485711     EISSN: 1748572X     Source Type: Journal    
DOI: 10.1504/IJMMM.2006.010657     Document Type: Article

References (38)

1. Balaji, A.K. and Mohan, V.S. (2002) ‘An effective cutting tool thermal conductivity based model for tool-chip contact in machining with multi-layer coated cutting tools’, Machining Science and Technology, Vol. 6, No. 3, pp.415–436.
2. Bhushan, B. (2001) Book Entitled ‘Modern Tribology Handbook – Tome’, 2nd Edition, CRC Press, ISBN 0-8493-8403-690000.
3. Bouzakis, K.D., Efstathiou, K., Vidakis, N., Kallindikis, D., Argos, S., Leyendecker, T., Erkens, G., Fuss, H.G. and Wenke, R. (1998) ‘Experimental and FEM analysis of the fatigue behaviour of PVD coatings on HSS substrate in milling’, Annals of the CIRP, Vol. 47, No. 1, pp.69–72.
4. x)N coatings at elevated temperatures’, Surface and Coatings Technology, Vols. 120-121, pp.34–43.
5. Buryta, D., Sowerby, R. and Yellowley, I. (1994) ‘Stress distributions on the rake face during orthogonal machining’, International Journal of Machine Tools and Manufacturing, Vol. 34, No. 5, pp.721–739.
6. Davies, M.A., Cooke, A.L. and Larsen, E.R. (2005) ‘High bandwidth thermal micrsocopy of machining AISI 1045 steel’, Annals of the CIRP, Vol. 54, No. 1.
7. Doyle, E.D., Horne, J.G. and Tabor, D. (1979) ‘Frictional interactions between chip and rake face in continuous chip formation’, Proceedings of the Royal Society London, Vol. A336, pp.179–183.
8. Du, F., Lovell, R. and Wu, T.W. (2000) ‘Boundary element method analysis of temperature fields in coated cutting tools’, International Journal of Solids and Structure, Vol. 38, pp.4557–4570.
9. Friedman, M.Y. and Lenz, E. (1971) ‘Investigation of the tool-chip contact length in metal cutting’, International Journal of Machine Tool Design Research, Vol. 10, pp.401–416.
10. Gekonde, H.O. and Subramanian, S.V. (2002) ‘Tribology of tool-chip interface and tool wear mechanisms’, Surface and Coatings Technology, Vol. 149, pp.151–160.
11. Grzesik, W. (2001) ‘An investigation of the thermal effects in orthogonal cutting associated with multilayer coatings’, Annals of the CIRP, Vol. 50, No. 1, pp.53–56.
12. Grzesik, W., Zalisz, Z. and Nieslony, P. (2002) ‘Friction and wear testing of multilayer coatings on carbude substrates for dry machining applications’, Surface and Coatings Technology, Vol. 155, pp.37–45.
13. Hedenquist, P. and Olsson, M. (1991) ‘Sliding wear testing of coated cutting tool material’, Tribology International, Vol. 24, pp.143–150.
14. Hedenquist, P., Jacobson, S. and Hogmark, S. (1997) ‘Tribological laboratory evaluation of thin hard coatings’, Surface and Coatings Technology, Vol. 97, pp.656–660.
15. Holmberg, K. and Matthews, A. (1998) Book entitled ‘Coatings Tribology’, Elsevier, ISBN 0-444-88870-5.
16. Jawahir, I.S. and Van Luttervelt, C.A. (1993) ‘Recent developments in chip control: research and applications’, Keynote Paper, Annals of the CIRP, Vol. 42, No. 2, pp.659–693.
17. Klocke, F. and Eisenblätter, G. (1997) ‘Dry cutting’, Annals of the CIRP, Vol. 46, No. 2, pp.519–526.
18. König, W. (1992) ‘New approaches to characterize the performance of coated cutting tools’, Annals of CIRP, Vol. 41, No. 1, pp.49–52.
19. Kustas, F.M., Fehrenbach, L.L. and Komanduri, R. (1997) ‘Nanocoatings on cutting tools for dry machining’, Annals of the CIRP, Vol. 46, No. 1, pp.39–42.
20. 2 coatings deposited by magnetron sputtering’, Wear, Vol. 231, pp.285–292.
21. MacGienly, T. and Monaghan, J. (2001) ‘Modelling the orthogonal machining process using coated cemented carbide cutting tools’, Journal of Materials Processing Technology, Vol. 118, pp.293–300.
22. M’Saoubi, R. and Chandrasekaran, H. (2004) ‘Investigation of the effects of tool micro-geometry and coating on tool temperature during orthogonal turning of quenched and tempered steel’, International Journal of Machine Tools and Manufacture, Vol. 44, pp.213–224.
23. Novak, S. and Komac, M. (1997) ‘Wear cermet cutting tools coated with physically vapour deposited TiN’, Wear, Vol. 205, pp.160–168.
24. Oxley, P.L.B. (1980) ‘Metallic friction under near-seizure conditions’, Wear, Vol. 65, pp.227–241.
25. Rech, J. and Djouadi, M.A. (2000) ‘Wear resistance of coatings in high speed gear hobbing’, Wear, Vol. 250, pp.45–53.
26. Rech, J., Battaglia, J.L. and Moisan, A. (2005) ‘Thermal influence of cutting tool coatings’, Journal of Materials Processing Technology, Vol. 159, pp.119–124.
27. Rech, J., Kusiak, A. and Battaglia, J.L. (2004) ‘Tribological and thermal functions of cutting tool coatings’, Surface and Coatings Technology, Vol. 186, pp.364–371.
28. 2/metal composite coatings deposited by closed flied unbalanced magnetron sputter ion plating’, Surface and Coatings Technology, Vol. 127, pp.24–37.
29. Roas, J.R., Celis, J.P. Vancoille, E., Veltrop, H., Boelens, S., Jungblut, F., Ebberink, J. and Holmberg, H. (1990) ‘Interrelation between processing, coating, properties and functional properties of steered arc physically vapour deposited (Ti, Al)N and (Ti,Nb)N coatings’, Thin Solid Films, Vols. 193-194, pp.547–556.
30. Sadik, M.I. and Lindström, B. (1995) ‘The effect of restricted contact length on tool performance’, Journal of Material Processing Technology, Vol. 48, pp.275–282.
31. Sproul, B. and Mattews, A. (1996) ‘Short courses program’, Proceedings of the Tenth Congress on Thin Solid Films, Salamanca, Spain, 23-27 September.
32. x)N layer toward iron and its cutting performance’, Surface and Coatings Technology, Vols. 177-178, pp.306–311.
33. Trent, E.M. (1991) Book Entitled ‘Metal Cutting’, Edition Butterworth Heinemann, ISBN 0-7506-1068-9.
34. Wiklund, U., Wänstrand, O., Larrson, L. and Hogmark, S. (1999) ‘Evaluation of new multilayred physical vapour deposition coatings in sliding contact’, Wear, Vol. 236, pp.88–95.
35. Wilson, S. and Alpas, A.T. (2000) ‘Tribo-layer formation during slinding wear of TiN coatings’, Wear, Vol. 245, pp.223–229.
36. Yen, Y.C., Jain, A., Chigurupati, P., Wu, T.W. and Altan, T. (2003) ‘Computer simulation of orthogonal cutting using a tool with multiple coatings’, Proceedings of the Sixth CIRP Workshop on Modelling of Machining, Hamilton, Canada.
37. Zambelli, G. and Vincent, L. (1998) Book Entitled ‘Matériaux et Contact – Une Approche Tribologique’, Editions Presses Polytechniques et Universitaires Romandes, ISBN 9-782880-743383.
38. Zorev, N.N. (1966) Book Entitled ‘Metal Cutting Mechanics’, Oxford: Pergamon Press.