Analysis on creeping channel flows of compressible fluids subject to wall slip

Rheologica Acta

Volumn 51, Issue 5, 2012, Pages 421-439

  Tang, Hansong S ^a  

^a CITY UNIVERSITY OF NEW YORK   (United States)

Author keywords

Analytical solution; Compressibility; Creeping channel flow; Herschel Bulkley fluid; Wall slip

Indexed keywords

EID: 84860530212     PISSN: 00354511     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00397-012-0617-y     Document Type: Article

References (69)

1. Allende M, Kalyon DM (2000) Assessment of particle-migration effects in pressure-driven viscometric flows. J Rheol 44(1): 79-90.
2. Aral B, Kalyon DM (1994) Effects of temperature and surface roughness on time-dependent development of wall slip in torsional flow of concentrated suspensions. J Rheol 38: 957-972.
3. Aral B, Kalyon DM (1995) Rheology and extrudability of very concentrated suspensions: effects of vacuum imposition. Plast Rubber Compos Process Appl 24: 201-210.
4. Ballesta P, Besseling R, Isa L, Petekidis G, Poon WCK (2008) Slip and flow of hard-sphere colloidal glasses. Phys Rev Lett 101: 25830-1-4.
5. Bird RB, Dai GC, Yarusso BJ (1983) The rheology and flow of viscoplastic materials. Rev Chem Eng 1: 1-70.
6. Bird RB, Stewart WE, Lightfoot EN (2002) Transport phenomena, 2nd ed. Wiley.
7. Brochard-Wyart F, De Gennes, PG (2007) Naive model for stick-slip processes 23: 439-444.
8. Chen Y, Kalyon DM, Bayramli E (1993) Effects of surface roughness and the chemical structure of materials of construction on wall slip behavior of linear low density polyethylene in capillary flow. J Appl Polym Sci 50: 1169-1177.
9. Coussot P (1994) Steady, laminar flow of concentrated mud suspensions in open-channel. J Hydrol Res 32: 535-559.
10. de Gennes P-G (1979) Viscometric flows of tangled polymers. C R Acad Sci Ser B 288(14): 219-220.
11. de Gennes P-G (2002) On fluid/wall slippage. Langmuir 18: 3413-3414.
12. Den Doelder C J, Koopmans RJ, Molenaar J (1998) Quantitative modeling of HDPE spurt experiments using wall slip and generalized Newtonian flow. J Non-Newton Fluid Mech 79: 503-514.
13. Denn MM (2001) Extrusion instabilities and wall slip. Annu Rev Fluid Mech 33: 265-87.
14. Duan ZP, Muzychka YS (2007a) Slip flow in non-circular microchannels. Microfluidics Nanofluidics 3: 473-484.
15. Duan ZP, Muzychka YS (2007b) Compressibility effect on slip flow in non-circular microchannels. Nanoscale Microscale Thermophys Eng 11: 259-272.
16. Engqvist A, Hogg AM (2004) Unidirectional stratified flow through a non-rectangular channel. J Fluid Mech 509: 83-92.
17. Fujiyama M, Inata H (2002) Melt fracture behavior of polypropylene-type resins with narrow molecular weight distribution. II. suppression of sharkskin by addition of adhesive resins. J Appl Polym Sci 84: 2120-2127.
18. Gad-El-Hak M (1999) The fluid mechanics of microdevices-the Freemann scholar lecture. J Fluids Eng 121: 5-33.
19. Georgiou GC (2003) The time-dependent, compressible Poiseuille and extrudate-swell flows of a Carreau fluid with slip at the wall. J Non-Newton Fluid Mech 109: 93-114.
20. Gevgilili H, Kalyon DM (2001) Step strain flow: wall slip and other error sources. J Rheol 45(2): 467-475.
21. Granick S, Zhu Y, Lee H (2003) Slippery questions about complex fluids flowing past solids. Nat Mater 2: 221-227.
22. Gratton J, Minotti F, Mahajan SM (1999) Theory of creeping gravity currents of a non-Newtonian liquid. Phys Rev E 60: 6960-6967.
23. Gupta MC, Goyal MC (1971) Unsteady plane Poiseuille flow between two parallel plates. Proc Math Sci 74: 68-78.
24. Hatzikiriakos SG (1994) The onset of wall slip and sharkskin melt fracture in capillary flow. Polym Eng Sci 34: 1441-1449.
25. Hatzikiriakos SG, Dealy JM (1992a) Wall slip of molten high density polyethylenes. II Capillary rheometer studies. J Rheol 36: 703-741.
26. Hatzikiriakos SG, Dealy JM (1992b) Role of slip and fracture in the oscillating flow of HDPE in a capillary. J Rheol 36: 845-884.
27. Hatzikiriakos SG, Dealy JM (1994) Start-up pressure transients in a capillary rheometer. Polym Eng Sci 34: 493-499.
28. Herschel WH, Bulkley R (1926) Measurement of consistency as applied to rubber-benzene solutions. Am Soc Test Proc 26: 621-633.
29. Hill DA, Hasagawa T, Denn MM (1990) On the apparent relation between adhesive failure and melt fracture. J Rheol 34: 891-918.
30. Huang X, Garcia MH (1998) A Herschel-Bulkley model for mud flow down a slope. J Fluid Mech 374: 305-333.
31. Huo YL, Kassab GS (2006) Pulsatile blood flow in the entire coronary arterial tree: theory and experiment. Am J Physiol, Heart Circ Physiol 291: H1074-H1087.
32. Ishida T, Chen Q, Mizuta Y, Roegiers J-C (2004) Influence of fluid viscosity on the hydraulic fracturing mechanism. J Energy Resour Technol 126: 190-200.
33. Jang J, Wereley ST (2004) Pressure distributions of gaseous slip flow in straight and uniform rectangular microchannels. Microfluid Nanofluid 1: 41-51.
34. Kalyon DM (2005) Apparent slip and viscoplasticity of concentrated suspensions. J Rheol 49(3): 621-640.
35. Kalyon D, Gevgilili H (2003) Wall slip and extrudate distortion of three polymer melts. J Rheol 47: 683-699.
36. Kalyon DM, Tang HS (2007) Inverse problem solution of squeeze flow for parameters of generalized Newtonian fluid and wall slip. J Non-Newton Fluid Mech 143(2007): 133-140.
37. Kalyon DM, Yazici R, Jacob C, Aral B, Sinton SW (1991) Effects of air entrainment on the rheology of concentrated suspensions during continuous processing. Polym Eng Sci 31: 1386-1392.
38. Kalyon DM, Gokturk H, Yaras P, Aral B (1995) Motion analysis of development of wall slip during die flow of concentrated suspensions. SPE ANTEC Tech Papers 41: 1130-1134.
39. Kalyon DM, Lawal A, Yazici R, Yaras P, Railkar S (1999) Mathematical modeling and experimental studies of twin screw extrusion of filled polymers. Polym Eng Sci 39: 1139-1151.
40. Kennard EH (1938) Kinetic theorey of gases. McGraw-Hill, New York.
41. Knudsen M (1950) The kinetic theory of gases, 3rd edn. Methuen, London.
42. Landau L, Lifshitz EM (1987) Fluid mech. Pergamon, 2nd edn.
43. Lawal A, Kalyon DM (1994) Non-isothermal model of single screw extrusion of generalized Newtonian fluids. Numer Heat Transf 26: 103-121.
44. Liu KF, Mei CC (1989) Slow spreading of a sheet of Bingham fluid on an inclined plane. J Fluid Mech 207: 505-529.
45. Lupton M, Regester JW (1965) Melt flow of polyethylene at high rates. Polym Eng Sci 5: 235-245.
46. Mcginty S, Mckee S, Mcdermott R (2009) Analytic solutions of Newtonian and non-Newtonian pipe flows subject to a general time-dependent pressure gradient. J Non-Newton Fluid Mech 162: 54-77.
47. Mooney M (1931) Explicit formulas for slip and fluidity. J Rheol 2: 210-222.
48. Muzychka YS, Yovanovich MM (2010) Unsteady viscous flows and stokes's first problem. Int J Therm Sci 49: 820-828.
49. Navier CL, Sur MH (1827) Les lois du mouvement des fluides. Mem Acad R Sci Inst Fr 6: 389-440.
50. Neto C, Evans DR, Bonaccurso E, Butt H-J, Craig VSJ (2005) Boundary slip in Newtonian liquids: a review of experimental studies. Rep Prog Phys 68: 2859-2897.
51. Ovaici H, Mackley MR, Mckinley GH, Crook SJ (1998) The experimental observation and modeling of an "Ovaici" necklace and stick-spurt instability arising during the cold extrusion of chocolate. J Rheol 42: 125-157.
52. Park HE, Lim ST, Smillo F, Dealy JM (2008) Wall slip and spurt flow of polybutadiene. J Rheol 52: 1201-1239.
53. Pereira GG (2009) Effect of variable slip boundary conditions on flows of pressure driven non-Newtonian fluids. J Non-Newton Fluid Mech 157: 197-206.
54. Person TJ, Denn MM (1997) The effect of die materials and pressure-dependent slip on the extrusion of linear low-density polyethylene. J Rheol 41: 249-265.
55. Pozrikidis C (1998) Gravity-driven creeping flow of two adjacent layers through a channel and down a plane wall. J Fluid Mech 371: 345-376.
56. Press H, Teukolsky SA, Vetterling WT, Flannery BP (1992) Numerical recipes in Fortran, Cambridge Univ. Press.
57. Prudhomme RK, Chapman TW, Bowen JR (1986) Laminar compressible flow in a tube. Appl Sci Res 43: 67-74.
58. Taliadorou E, Georgiou GC, Moulitsas IJ (2009) Weakly compressible Poiseuille flows of a Herschel-Bulkley fluid. J Non-Newton Fluid Mech 158: 162-169.
59. Tang HS, Kalyon DM (2004) Estimation of the parameters of Herschel-Bulkley fluid under wall slip using a combination of capillary and squeeze flow viscometers. Rheol Acta 43: 80-88.
60. Tang HS, Kalyon DM (2008a) Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: ramifications on development of flow instabilities. J Rheol 52: 1069-1090.
61. Tang HS, Kalyon DM (2008b) Unsteady circular tube flow of compressible polymetric liquids subject to pressure-dependent wall slip. J Rheol 52: 507-525.
62. Uhland E (1976) Modell zur beschreibung des flieβens wandgleitender substanzen durch dusen. Rheol Acta 15: 30-39.
63. Venerus DC, Bugajsky DJ (2010) Compressible laminar flow in a channel. Phys Fluids 22: 046101.
64. Wieland M, Gray JMNT, Hutter K (1999) Channelized free-surface flow of cohesionless granular avalanches in a chute with shallow lateral curvature. J Fluid Mech 392: 73-100.
65. Yilmazer U, Kalyon DM (1989) Slip effects in capillary and parallel disk torsional flows of highly filled suspensions. J Rheol 33: 1197-1212.
66. Yilmazer U, Kalyon DM (1991) Dilatancy of concentrated suspensions with Newtonian matrices. Polym Compos 12: 226-232.
67. Yilmazer U, Gogos C, Kalyon DM (1989) Mat formation and unstable flows of highly filled suspensions in capillaries and continuous processors. Polym Compos 10: 242-248.
68. Zhang W, Silvi N, Vlachopoulos J (1995) Modeling and experiments of squeezing flow of polymer melts. Int Polym Process 10: 155-164.
69. Zohar Y, Lee SYK, Lee WY, Jiang L, Tong P (2002) Subsonic gas flow in a straight and uniform microchannel. J Fluid Mech 472: 125-151.