Time-dependent tube flow of compressible suspensions subject to pressure dependent wall slip: Ramifications on development of flow instabilities

Journal of Rheology

Volumn 52, Issue 5, 2008, Pages 1069-1090

  Tang, H S ^a,b   Kalyon, Dilhan M ^a  

^a STEVENS INSTITUTE OF TECHNOLOGY   (United States)

^b CITY UNIVERSITY OF NEW YORK   (United States)

Author keywords

Compressibility; Instabilities; Polymer; Pressure dependence; Suspension; Tube flow; Wall slip

Indexed keywords

APPARENT SLIP; CIRCULAR TUBES; COMPRESSIBILITY; COMPRESSIBLE POLYMER MELTS; CONCENTRATED SUSPENSIONS; EXPERIMENTAL OBSERVATIONS; FLOW CURVES; FLOW INSTABILITIES; HOLLOW SPHERICAL PARTICLES; INSTABILITIES; NUMERICAL SIMULATIONS; POLY-DI-METHYL SILOXANE; POLYMER; POLYMERIC BINDERS; POLYMERIC SUSPENSIONS; PRESSURE DEPENDENCE; PRESSURE DEPENDENT; RIGID PARTICLES; SLIP CONDITIONS; SUSPENSION; SUSPENSION FLOWS; TIME-DEPENDENT; TUBE FLOW; TUBE WALLS; WALL SLIP; WALL SLIPS;

BOUNDARY CONDITIONS; COMPUTER SIMULATION; CONCENTRATION (PROCESS); INCOMPRESSIBLE FLOW; MATHEMATICAL MODELS; PIPE FLOW; POLYMER MELTS; SUSPENSIONS (COMPONENTS); SUSPENSIONS (FLUIDS); TUBES (COMPONENTS);

WALLS (STRUCTURAL PARTITIONS);

EID: 50049098284     PISSN: 01486055     EISSN: None     Source Type: Journal    
DOI: 10.1122/1.2955508     Document Type: Article

References (58)

1. Adams, S., W. J. Frith, and J. R. Stokes, " Influence of particle modulus on the rheological properties of agar microgel suspensions.," J. Rheol. 48, 1195-1213 (2004).
2. Allende, M., and D. Kalyon, " Assessment of particle-migration effects in pressure-driven viscometric flows.," J. Rheol. 44, 79-90 (2000).
3. Aral, B., and D. M. Kalyon, " Effects of temperature and surface roughness on time-dependent wall slip in steady torsional flow of concentrated suspensions.," J. Rheol. 38, 957-972 (1994).
4. Aral, B., and D. M. Kalyon, " Rheology and extrudability of very concentrated suspensions: Effects of vacuum imposition.," Plast. Rubber Process. Applic. 24, 201-210 (1995).
5. Benbow, J. J., and P. Lamb, " New aspects of melt fracture.," SPE Trans. 3, 7-17 (1963).
6. Bernstein, B., E. Kearsley, and L. Zapas, " A study of stress relaxation with finite strain.," Trans. Soc. Rheol. 7, 391-410 (1963).
7. Birinci, E., and D. Kalyon, " Development of extrudate distortions in poly(dimethyl siloxane) and its suspensions with rigid particles.," J. Rheol. 50 (3), 313-326 (2006).
8. Brandrup, J., E. Immergut, and E. Grulke, Polymer Handbook, 4th ed. (Wiley, New York, 1999).
9. Cohen, Y., and A. B. Metzner, " Apparent slip flow of polymer solutions.," J. Rheol. 29, 67-102 (1985).
10. Denn, M. M., " Extrusion instabilities and wall slip.," Annu. Rev. Fluid Mech. 33, 265-287 (2001).
11. Den Doelder, C. J., R. J. Koopmans, and J. Molenaar, " Quantitative modeling of HDPE spurt experiments using wall slip and generalized Newtonian flow.," J. Non-Newtonian Fluid Mech. 79, 503-514 (1998).
12. Friend, J. P., and R. J. Hunter, " Plastic flow behavior of coagulated suspensions treated as a repeptization phenomenon.," J. Colloid Interface Sci. 37, 548-556 (1971).
13. Gadala-Maria, F., and A. Acrivos, " Shear-induced structure in a concentrated suspension of solid spheres.," J. Rheol. 24, 799-814 (1980).
14. Gevgilili, H., and D. M. Kalyon, " Step strain flow: Wall slip effects and other error sources.," J. Rheol. 45, 1-9 (2001).
15. Gevgilili, H., " Development of the wall slip condition and its ramifications for polymers and other complex fluids.," Thesis, Stevens Institute of Technology, Hoboken, NJ (2003).
16. Georgiou, G. C., " The time-dependent, compressible Poiseuille and extrusion-swell flows of a Carreau fluid with slip at wall.," J. Non-Newtonian Fluid Mech. 109, 93-114 (2003).
17. Hatzikiriakos, S. G., and J. M. Dealy, " Role of slip and fracture in the oscillating flow of HDPE in a capillary.," J. Rheol. 36, 845-884 (1992a).
18. Hatzikiriakos, S. G., and J. M. Dealy, " Wall slip of molten high density polyethylenes. II. Capillary rheometer studies.," J. Rheol. 36, 703-741 (1992b).
19. Hatzikiriakos, S. G., and, K. B. Migler, Editors, Polymer Processing Instabilities: Control and Understanding (Dekker, New York, 2005).
20. Jana, S., B. Kapoor, and A. Acrivos, " Apparent wall-slip velocity coefficients in concentrated suspensions of noncolloidal particles.," J. Rheol. 39, 1123-1132 (1995).
21. Kalika, D. S., and M. M. Denn, " Wall slip and extrudate distortion in linear low density polyethylene.," J. Rheol. 31, 815-834 (1987).
22. Kalyon, D. M., D. Yu, and J. Yu, " Melt rheology of two engineering thermoplastics: Poly(ether imide) and Poly(2,6-Dimethyl-1,4-phenylene ether).," J. Rheol. 32, 789-811 (1988).
23. Kalyon, D. M., R. Yazici, C. Jacob, B. Aral, and S. W. Sinton, " Effects of air entrainment on the rheology of concentrated suspensions during continuous processing.," Polym. Eng. Sci. 31, 1386-1392 (1991).
24. Kalyon, D. M., P. Yaras, B. Aral, and U. Yilmazer, " Rheological behavior of a concentrated suspension: A solid rocket fuel simulant.," J. Rheol. 37, 35-53 (1993).
25. Kalyon, D., H. Gokturk, P. Yaras, and B. Aral, " Motion analysis of development of wall slip during die flow of concentrated suspensions.," Society of Plastics Engineers ANTEC Technical Papers, 41, 1130-1134 (1995).
26. Kalyon, D., and H. Gevgilili, " Wall slip and extrudate distortion of three polymer melts.," J. Rheol. 47 (3), 683-699 (2003).
27. Kalyon, D., " Apparent slip and viscoplasticity of concentrated suspensions.," J. Rheol. 49, 621-640 (2005).
28. Kalyon, D., and H. S. Tang, " Inverse problem solution of squeeze flow for parameters of generalized Newtonian fluid and wall slip.," J. Non-Newtonian Fluid Mech. 143, 133-140 (2007).
29. Karnis, A., and S. G. Mason, " The flow of suspensions through tubes VI. Meniscus effects.," J. Colloid Interface Sci. 23, 120-133 (1967).
30. Knudsen, M., The Kinetic Theory of Gases, 3rd ed. (Methuen, London, 1950).
31. Kok Hartman, P. J. A., S. Kazarian, C. J. Lawrence, and B. J. Briscoe, " Near-wall particle depletion in a flowing colloidal suspension.," J. Rheol. 46, 481-493 (2002).
32. Krieger, I. M., and T. J. Dougherty, " A mechanism for Non-Newtonian Flow in suspensions of rigid spheres.," Trans. Soc. Rheol. 3, 137-152 (1959).
33. Laun, H. M., " Description of the nonlinear shear behavior of a low density polyethylene melt by means of an experimentally determined strain dependent memory function.," Rheol. Acta 17, 1-15 (1978).
34. Lawal, A., and D. M. Kalyon, " Compressive squeeze flow of viscoplastic fluids with apparent wall slip.," Int. Polym. Process. 15, 63-71 (2000).
35. Leighton, D., and A. Acrivos, " The shear-induced migration of particles in concentrated suspensions.," J. Fluid Mech. 275, 155-199 (1987).
36. Lu, G., D. Kalyon, I. Yilgör, and E. Yilgör, " Rheology and processing of BaS O4 filled medical-grade thermoplastic polyurethane.," Polym. Eng. Sci. 44, 1941-1948 (2004).
37. Meeker, S. P., R. T. Bonnecaze, and M. Cloitre, " Slip and flow in pastes of soft particles: Direct observation and rheology.," J. Rheol. 48, 1295-1320 (2004).
38. Mewis, J., " Rheology of concentrated dispersions.," Adv. Colloid Interface Sci. 6, 173-200 (1976).
39. Nott, P. R., and J. F. Brady, " Pressure-driven flow of suspensions: Simulations and theory.," J. Fluid Mech. 275, 157-199 (1994).
40. Osaki, K., Proceedings of the Seventh International Congress on Rheology, C. Klason, and, J. Kubat, eds. (Tages Anzeiger, Götenburg, 1976), pp. 104-109.
41. Person, T. J., and M. M. Denn, " The effect of die materials and pressure-dependent slip on the extrusion of linear low-density polyethylene.," J. Rheol. 41, 249-265 (1997).
42. Phillips, R. J., R. C. Armstrong, R. A. Brown, A. L. Graham, and J. R. Abbott, " A constitutive equation for concentrated suspensions that accounts for shear-induced particle migration.," Phys. Fluids A 4, 30-40 (1992).
43. Reiner, M., Deformation, Strain and Flow (H. K. Lewis, London, 1960).
44. Robert, L., Y. Demay, and B. Vergnes, " Stick-slip flow of high density polyethylene in a transparent slit die investigated by laser Doppler velocimetry.," Rheol. Acta 43, 1435-1528 (2004).
45. Rosenbaum, E. E., S. K. Randa, S. G. Hatzikiriakos, C. W. Stewart, D. L. Henry, and M. Buckmaster, " Boron nitride as a processing aid for the extrusion of polyolefins and fluoropolymers.," Polym. Eng. Sci. 40, 179-190 (2000).
46. Rough, S. L., J. Bridgwater, and D. I. Wilson, " Effects of liquid phase migration on extrusion of microcrystalline cellulose pastes.," Int. J. Pharm. 204, 117-126 (2000).
47. Tabuteau, H., J. Baudez, F. Bertrand, and P. Coussot, " Mechanical characteristics and origin of wall slip in pasty biosolids.," Rheol. Acta 43, 2, 168-174 (2004).
48. Tang, H. S., and D. M. Kalyon, " Time-dependent development of flow instabilities of non-Newtonian melts and suspensions with rigid particles.," Proceedings of AICHE Annual Meeting, Austin, Texas, (2004a).
49. Tang, H. S., and D. M. Kalyon, " Estimation of the parameters of Herschel-Bulkley fluid under wall slip using a combination of capillary and squeeze flow viscometers.," Rheol. Acta 43, 80-88 (2004b).
50. Tang, H. S., and D. M. Kalyon, " Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip.," J. Rheol. 52, 507-525 (2008).
51. Tyrrell, J. W. G., and P. Attard, " Images of nanobubbles on hydrophobic surfaces and their interactions.," Phys. Rev. Lett. 87, 176104 (2001).
52. Vinogradov, G. V., and L. I. Ivanova, " Viscous properties of polymer melts and elastomers exemplified by ethylene-propylene copolymer.," Rheol. Acta 6, 209-222 (1967).
53. Wagner, M. H., " Analysis of the time-dependent non-linear stress-growth data for shear and elongational flow of a low-density branched polyethylene melt.," Rheol. Acta 15, 136-142 (1976).
54. Yaras, P., D. M. Kalyon, and U. Yilmazer, " Flow instabilities in capillary flow of concentrated suspensions.," Rheol. Acta 33, 48-59 (1994).
55. Yaras, P., " Rheological behavior and twin screw extrusion flow of non-colloidal concentrated suspensions.," Ph.D. thesis, Stevens Institute of Technology, Hoboken, NJ (1995).
56. Yilmazer, U., and D. M. Kalyon, " Slip effects in capillary and parallel disk torsional flows of highly filled suspensions.," J. Rheol. 33, 1197-1212 (1989).
57. Yilmazer, U., C. Gogos, and D. M. Kalyon, " Mat formation and unstable flows of highly filled suspensions in capillaries and continuous processors.," Polym. Compos. 10, 242-248 (1989).
58. Zarraga, I. E., D. A. Hill, and D. T. Leighton, Jr., " The characterization of the total stress of concentrated suspensions of noncolloidal spheres in Newtonian fluids.," J. Rheol. 44, 185-220 (2000).