Wall slip and spurt flow of polybutadiene

Journal of Rheology

Volumn 52, Issue 5, 2008, Pages 1201-1239

  Park, Hee Eon ^a   Lim, Sung Taek ^a,c   Smillo, Fabricio ^a   Dealy, John M ^a   Robertson, Christopher G ^b  

^a MCGILL UNIVERSITY   (Canada)

^b Bridgestone Americas   (United States)

^c Samsung Electro Mechanics   (South Korea)

Author keywords

Adhesive slip; Capillary rheometer; Cohesive slip; Cox Merz rule; Effect of pressure; Maximum stress; Minimum stress; Peeling; Polybutadiene; Rolling; Secondary flow; Sliding plate rheometer; Slip velocity; Spurt

Indexed keywords

ADHESIVE SLIP; CAPILLARY RHEOMETER; CAPILLARY RHEOMETERS; CAPILLARY RHEOMETRY; COHESIVE SLIP; COX-MERZ RULE; CRITICAL VALUES; DRIVING PRESSURE; EFFECT OF PRESSURE; INFLOW RATES; MAXIMUM STRESS; MINIMUM STRESS; PEELING; POLYBUTADIENE; ROLLING; SECONDARY FLOW; SLIDING PLATE; SLIDING PLATE RHEOMETER; SLIP VELOCITY; SPURT; SPURT FLOW; WALL SHEAR STRESS; WALL SLIPS;

BUTADIENE; FLOW RATE; METALLURGY; SHEAR STRESS; STRENGTH OF MATERIALS; SURFACE PLASMON RESONANCE; WALLS (STRUCTURAL PARTITIONS);

RHEOMETERS;

EID: 50049083811     PISSN: 01486055     EISSN: None     Source Type: Journal    
DOI: 10.1122/1.2964199     Document Type: Article

References (70)

1. Adewale, K. P., and A. I. Leonov, " Modeling spurt and stress oscillations in flows of molten polymers.," Rheol. Acta 36, 110-127 (1997).
2. Agassant, J.-F., D. R. Arda, C. Combeaud, A. Merten, H. Münstedt, M. R. Mackley, L. Robert, and B. Vergnes, " Polymer processing extrusion instabilities.," Int. Polym. Process. 21, 239-255 (2006).
3. Barone, J. R., and S.-Q. Wang, " Adhesive wall slip on organic surfaces.," J. Non-Newtonian Fluid Mech. 91, 31-36 (2000).
4. Beard, M. A., G. R. Tabor, S. J. K. Ritchie, and K. E. Evans, " Numerical investigation and visualization of polymer behavior within a capillary die.," Polym. Eng. Sci. 47, 1688-1694 (2007).
5. Bergem, N., " Visualization studies of polymer melt flow anomalies in extrusion.," Proc. VIIth Internat. Congr. Rheol., Swedish Soc. of Rheol., 1976, p. 50 (unpublished).
6. Blyer, L. L., and A. C. Hart, Jr., " Capillary flow instability of ethylene polymer melts.," Polym. Eng. Sci. 10, 193-203 (1970).
7. Booij, H. C., P. Leblans, J. Palmen, and G. Tiemersma-Thoone, " Nonlinear viscoelasticity and the Cox-Merz relations for polymeric fluids.," J. Polym. Sci., Polym. Phys. Ed. 21, 1703-1711 (1983).
8. Boukany, P. E., P. Tapadia, and S.-Q. Wang, " Interfacial stick-slip transition in simple shear of entangled melts.," J. Rheol. 50, 641-654 (2006).
9. Cox, W. P., and E. H. Merz, " Correlation of dynamic and steady flow viscosities.," J. Polym. Sci. 28, 619-621 (1958).
10. Cross, M. M., " Analysis of flow data on polymer systems under steady or oscillatory shear.," in Polymer Systems, Deformation and Flow: Proc of the 1966 Ann Conf Brit Soc Rheol., edited by, R. E. Wetton, and R. W. Whorlow (Macmillan, London, 1968), pp. 263-273.
11. Dealy, J. M., S. R. Doshi, and F. R. Bubic, " Method and apparatus for measuring shear stress.," US Patent No. 5,094,100 (1992).
12. Dealy, J. M., " Misuse of the term pressure in rheology.," Rheol. Bull. 0035-4538 77, 10-13 (2008); Dealy, J. M., " Misuse of the term pressure in rheology.," Rheol. Bull. 77, 26-27 (2008).
13. Denn, M. M., " Extrusion instabilities and wall slip.," Annu. Rev. Fluid Mech. 33, 265-287 (2001).
14. Dhori, P. K., A. J. Giacomin, and J. C. Slattery, " Common line motion II: Sliding plate rheometry.," J. Non-Newtonian Fluid Mech. 71, 215-229 (1997).
15. Durliat, E., H. Hervet, and L. Leger, " Influence of grafting density on wall slip of a polymer melt on a polymer brush.," Europhys. Lett. 38, 383-388 (1997).
16. Gerrard, D. P., and J. Padovan, " The friction and wear of rubber. Part 1: Effects of dynamically changing slip direction and the damage orientation distribution function.," Rubber Chem. Technol. 75, 29-47 (2002).
17. Gerrard, D. P., and J. Padovan, " The friction and wear of rubber. Part 2: Micro-mechanical description of intrinsic wear.," Rubber Chem. Technol. 76, 101-121 (2003).
18. Giacomin, A. J., T. Samurkas, and J. M. Dealy, " A novel sliding plate rheometer for molten plastics.," Polym. Eng. Sci. 24, 499-504 (1989).
19. Hatzikiriakos, S. G., and J. M. Dealy, " Wall slip of molten high density polyethylenes. I. Sliding plate rheometer studies.," J. Rheol. 35, 497-523 (1991).
20. Hatzikiriakos, S. G., and J. M. Dealy, " Wall slip of molten high density polyethylenes. II. Capillary rheometer studies.," J. Rheol. 36, 703-741 (1992a).
21. Hatzikiriakos, S. G., and J. M. Dealy, " Role of slip and fracture in the oscillating flow of HDPE in a capillary.," J. Rheol. 36, 845-880 (1992b).
22. Hill, D. A., T. Hasegawa, and M. M. Denn, " On the apparent relation between adhesive failure and melt fracture.," J. Rheol. 34, 891-918 (1990).
23. Hill, D. A., " Wall slip in polymer melts: A pseudo chemical model.," J. Rheol. 42, 581-601 (1998).
24. Hürlimann, H. P. A., " A multidirectional shear rheometer for polymer melts.," Rheol. Acta. 30, 480-490 (1991).
25. Ianniruberto, G., and G. Marrucci, " On compatibility of the Cox-Merz rule with the model of Doi and Edwards.," J. Non-Newtonian Fluid Mech. 65, 241-246 (1996).
26. Joshi, Y. M., A. K. Lele, and R. A. Mashelkar, " A unified wall slip model.," J. Non-Newtonian Fluid Mech. 94, 135-149 (2000).
27. Joshi, Y. M., A. K. Lele, and R. A. Mashelkar, " Molecular model for wall slip: Role of convective constraint release.," Macromolecules 34, 3412-3420 (2001).
28. Kalika, G. S., and M. M. Denn, " Wall slip and extrudate distortion in linear low density polyethylene.," J. Rheol. 31, 815-834 (1987).
29. Kelly, A. L., P. D. Coates, T. W. Dobbie, and D. J. Fleming, " Online rheometry: Shear and extensional flows.," Plast. Rubber Compos. Proc. Appl. 25, 313-318 (1996).
30. Kim, S., and J. M. Dealy, " Design of an orifice die to measure entrance pressure drop.," J. Rheol. 45, 1413-1419 (2001).
31. Koran, F., " Anomalous wall slip behavior of linear low density polyethylenes.," M. Eng. Thesis, McGill University, Canada, 1994.
32. Koran, F., and J. M. Dealy, " A high-pressure sliding plate rheometer for polymer melts.," J. Rheol. 43, 1279-1290 (1999a).
33. Koran, F., and J. M. Dealy, " Wall slip of polyisobutylene: Interfacial and pressure effects.," J. Rheol. 43, 1291-1306 (1999b).
34. Laun, H. M., " Pressure dependent viscosity and dissipative heating in capillary rheometry of polymer melts.," Rheol. Acta 42, 295-308 (2003).
35. Laun, H. M., " Capillary rheometry for polymer melts revisited.," Rheol. Acta 43, 509-528 (2004).
36. Laun, H. M., and H. Schuch, " Transient elongational viscosities and drawability of Polymer Melts.," J. Rheol. 33, 119-175 (1989).
37. Ĺger, L., H. Hervet, T. Charitat, and V. Koutsos, " The stick-slip transition in highly entangled poly(styrene-butadiene) melts.," Adv. Colloid Interface Sci. 94, 39-52 (2001).
38. Malkin, A. Y., A. V. Baranov, and M. E. Vickulenkova, " Experimental estimation of wall slip for filled rubber compounds.," Rheol. Acta 32, 150-155 (1993).
39. Marrucci, G., " Dynamics of entanglements: A nonlinear model consistent with the Cox-Merz rule.," J. Non-Newtonian Fluid Mech. 62, 279-289 (1996).
40. Mhetar, V., and L. A. Archer, " Slip in entangled polymer melts. 1. General features.," Macromolecules 31, 8607-8616 (1998).
41. Mitsoulis, E., S. G. Hatzikiriakos, K. Christodoulou, and D. Vlassopoulos, " Sensitivity analysis of the Bagley correction to shear and extensonal rheology.," Rheol. Acta 37, 438-448 (1998).
42. Mooney, M., " Explicit formulas for slip and fluidity.," J. Rheol. 2, 210-222 (1931).
43. Myerholtz, R. W., " Oscillating flow behavior of high-density polyethylene melts.," J. Appl. Polym. Sci. 11, 687-698 (1967).
44. Park, H. E., and J. M. Dealy, " Effects of pressure and supercritical fluids on the viscosity of polyethylene.," Macromolecules 39, 5438-5452 (2006).
45. Park, H. E., S. T. Lim, H. M. Laun, and J. M. Dealy, " Measurement of pressure coefficient of melt viscosity; drag flow versus capillary flow.," Rheol. Acta (to be published in 2008).
46. Person, T. J., and M. M. Denn, " The effect of die materials and pressure-dependent slip on the extrusion of linear low-density polyethylene.," J. Rheol. 41, 248-265 (1997).
47. Piau, J. M., and N. El-Kissi, " Measurement and modelling of friction in polymer melts during macroscopic slip at the wall.," J. Non-Newtonian Fluid Mech. 54, 121-142 (1994).
48. Schallamach, A., " On the abrasion of rubber.," Proc. Phys. Soc. London, Sect. B 67, 883-891 (1954).
49. Shaw, M. T., " Detection of multiple flow regimes in capillary flow at low shear stress.," J. Rheol. 51, 1303-1318 (2007).
50. Stepanyan, R., J. J. M. Slot, J. Molenaar, and M. Tchesnokov, " A simple constitutive model for a polymer flow near a polymer-grafted wall.," J. Rheol. 49, 1129-1151 (2005).
51. Subbotin, A., A. Semenov, and M. Doi, " Friction in strongly confined polymer melts: Effect of polymer bridges.," Phys. Rev. E 56, 623-630 (1997).
52. Tang, H. S., and D. M. Kalyon, " Unsteady circular tube flow of compressible polymeric liquids subject to pressure-dependent wall slip.," J. Rheol. 52, 507-525 (2008).
53. Uhland, E., " Das anomale Fleissverhalten von Polyäthylen hoher Dichte.," Rheol. Acta 18, 1-24 (1979).
54. Utracki, L. A., and R. Gendron, " Pressure oscillation during extrusion of polyethylenes.," J. Rheol. 28, 601-623 (1984).
55. Vinogradov, G. V., A. Y. Malkin, Y. G. Yanovskii, E. K. Borisenkova, B. V. Yarlykov, and B. V. Bereszhaya, " Viscoelastic properties and flow of narrow distribution polybutadienes and polyisoprenes.," J. Polym. Sci., Part A-2 10, 1061-1084 (1972).
56. Wang, S. Q., and P. A. Drda, " Superfluid-like stick-slip transition in capillary flow of linear polyethylene: 1. General features.," Macromolecules 29, 2627-2632 (1996a).
57. Wang, S. Q., and P. A. Drda, " Stick-slip transition in capillary flow of linear polyethylene: 2. Molecular weight and low temperature anomaly.," Macromolecules 29, 4115-419 (1996b).
58. Wang, S. Q., and P. A. Drda, " Exploring molecular origins of sharkskin, partial slip and slope change in flow curves of linear low density polyethylene.," J. Rheol. 40, 875-898 (1996c).
59. Wang, S. Q., and P. A. Drda, " Molecular instabilities in capillary flow of polymer melts: interfacial stick-slip transition, wall slip and extrudate distortion.," Macromol. Chem. Phys. 198, 673-701 (1997a).
60. Wang, S. Q., and P. A. Drda, " Stick-slip transition in capillary flow of linear polyethylene: 3. Surface conditions.," Rheol. Acta 36, 128-134 (1997b).
61. White, J. L., M. M. Han, N. Nakajima, and R. Rrzoskowski, " The influence of materials of construction on biconical rotor and capillary measurements of shear viscosity of rubber and its compounds and consideration of slippage.," J. Rheol. 35, 167-189 (1991).
62. Wise, M. W., M. M. Denn, A. T. Bell, J. W. Mays, K. Hong, and H. Iatrou, " Surface mobility and slip of polybutadiene melts in shear flow.," J. Rheol. 44, 549-567 (2000).
63. Wood-Adams, P. M., and J. M. Dealy, " Use of rheological measurements to estimate molecular weight distribution of linear polyethylene.," J. Rheol. 40, 761-778 (1996).
64. Xu, J., S. Costeux, J. M. Dealy, and M. N. De Decker, " Use of a sliding plate rheometer to measure the first normal stress difference at high shear rates.," Rheol. Acta, 46, 815-824 (2007a).
65. Xu, F., M. M. Denn, and J. D. Schieber, " Stochastic chain simulation of wall slip in entangled polymer melts.," J. Rheol. 51, 451-464 (2007b).
66. Yang, X., S. Q. Wang, A. Halasa, and H. Ishida, " Fast flow behavior of highly entangled monodisperse polymers. 1 Interfacial stick-slip transition of polybutadiene melts.," Rheol. Acta 37, 415-423 (1998a).
67. Yang, X., S. Q. Wang, A. Halasa, and H. Ishida, " Fast flow behavior of highly entangled monodisperse polymers. 2. Barrel correction, hysteresis and self-oscillation in capillary flow of PB.," Rheol. Acta, 37, 424-429 (1998b).
68. Yarin, A. L., and M. D. Graham, " A model for slip at polymer/solid interfaces.," J. Rheol. 42, 1491-1504 (1998).
69. Zhu, Z., " Wall slip and extrudate instability of 4-arm star polybutadienes in capillary flow.," Rheol. Acta 43, 373-382 (2004).
70. See EPAPS Document No. E-JORHD2-52-007805 for data values of plots in Figs.. For more information on EPAPS, see http://www.aip.org/pubservs/epaps. html.