Non-polydimethylsiloxane devices for oxygen-free flow lithography

Nature Communications

Volumn 3, Issue , 2012, Pages

  Bong, Ki Wan ^a   Xu, Jingjing ^a   Kim, Jong Ho ^a,b   Chapin, Stephen C ^a   Strano, Michael S ^a   Gleason, Karen K ^a   Doyle, Patrick S ^a  

^a Massachusetts Institute of Technology Cambridge   (United States)

^b Hanyang University   (South Korea)

Author keywords

[No Author keywords available]

Indexed keywords

DIMETICONE; MONOMER; OXYGEN; QUANTUM DOT; SINGLE WALLED NANOTUBE;

ARTICLE; DEVICES; FLOW LITHOGRAPHY; HYDROPHOBICITY; PARTICLE SIZE; SYNTHESIS; VAPOR;

EID: 84860475116     PISSN: None     EISSN: 20411723     Source Type: Journal    
DOI: 10.1038/ncomms1800     Document Type: Article

References (59)

1. Jeong, U., Wang, Y. L., Ibisate, M. & Xia, Y. N. Some new developments in the synthesis, functionalization, and utilization of monodisperse colloidal spheres. Adv. Funct. Mater. 15, 1907-1921 (2005). (Pubitemid 41803164)
2. Landfester, K. Synthesis of colloidal particles in miniemulsions. Annu. Rev. Mater. Res. 36, 231-279 (2006). (Pubitemid 44476831)
3. Abou-Hassan, A., Sandre, O. & Cabuil, V. Microfluidics in inorganic chemistry. Angew. Chem. Int. Ed. 49, 6268-6286 (2010).
4. Utada, A. S. et al. Monodisperse double emulsions generated from a microcapillary device. Science 308, 537-541 (2005). (Pubitemid 40570581)
5. Teh, S. Y., Lin, R., Hung, L. H. & Lee, A. P. Droplet microfluidics. Lab. Chip 8, 198-220 (2008). (Pubitemid 351191417)
6. Millman, J. R., Bhatt, K. H., Prevo, B. G. & Velev, O. D. Anisotropic particle synthesis in dielectrophoretically controlled microdroplet reactors. Nat. Mater. 4, 98-102 (2005). (Pubitemid 40021009)
7. Rastogi, V., Garcia, A. A., Marquez, M. & Velev, O. D. Anisotropic particle synthesis inside droplet templates on superhydrophobic surfaces. Macromol. Rapid. Commun. 31, 190-195 (2010).
8. Roh, K. H., Martin, D. C. & Lahann, J. Biphasic Janus particles with nanoscale anisotropy. Nature Mater. 4, 759-763 (2005). (Pubitemid 41397023)
9. Bhaskar, S., Hitt, J., Chang, S. W. L. & Lahann, J. Multicompartmental microcylinders. Angew. Chem. Int. Ed. 48, 4589-4593 (2009).
10. Rolland, J. P. et al. Direct fabrication and harvesting of monodisperse, shape-specific nanobiomaterials. J. Am. Chem. Soc. 127, 10096-10100 (2005). (Pubitemid 40995455)
11. Du, Y. A., Lo, E., Ali, S. & Khademhosseini, A. Directed assembly of cell-laden microgels for fabrication of 3D tissue constructs. Proc. Natl Acad. Sci. USA 105, 9522-9527 (2008). (Pubitemid 352031334)
12. Perry, J. L., Herlihy, K. P., Napier, M. E. & Desimone, J. M. PRINT: a novel platform toward shape and size specific nanoparticle theranostics. Acc. Chem. Res. 44, 990-998 (2011).
13. Yeh, J. et al. Micromolding of shape-controlled, harvestable cell-laden hydrogels. Biomaterials 27, 5391-5398 (2006). (Pubitemid 44093713)
14. Zhang, H. et al. Fabrication of multiphasic and regio-specifically functionalized PRINT (R) particles of controlled size and shape. New J. Phys. 11, 075018 (2009).
15. Rhee, M. et al. Synthesis of size-tunable polymeric nanoparticles enabled by 3D hydrodynamic flow focusing in single-layer microchannels. Adv. Mater. 23, H79-H83 (2011).
16. Karnik, R. et al. Microfluidic platform for controlled synthesis of polymeric nanoparticles. Nano Lett. 8, 2906-2912 (2008).
17. Jeon, N. L. et al. Neutrophil chemotaxis in linear and complex gradients of interleukin-8 formed in a microfabricated device. Nat. Biotechnol. 20, 826-830 (2002).
18. Hatch, A. et al. A rapid diffusion immunoassay in a T-sensor. Nat. Biotechnol. 19, 461-465 (2001). (Pubitemid 32428290)
19. Stroock, A. D et al. Chaotic mixer for microchannels. Science 295, 647-651 (2002). (Pubitemid 34111816)
20. Van, Dilla M.A., Dean, P. N., Laerum, O. D. & Melamed, M. R. Flow Cytometry: Instrumentation and Data Analysis (Academic Press, London, 1985).
21. Dendukuri, D., Pregibon, D. C., Collins, J., Hatton, T. A. & Doyle, P. S. Continuous-flow lithography for high-throughput microparticle synthesis. Nat. Mater. 5, 365-369 (2006).
22. Dendukuri, D., Gu, S. S., Pregibon, D. C., Hatton, T. A. & Doyle, P. S. Stop-flow lithography in a microfluidic device. Lab. Chip 7, 818-828 (2007). (Pubitemid 47000818)
23. Bong, K. W., Pregibon, D. C. & Doyle, P. S. Lock release lithography for 3D and composite microparticles. Lab. Chip 9, 863-866 (2009).
24. Bong, K. W., Bong, K. T., Pregibon, D. C. & Doyle, P. S. Hydrodynamic Focusing Lithography. Angew. Chem. Int. Ed. 49, 87-90 (2010).
25. Pregibon, D. C., Toner, M. & Doyle, P. S. Multifunctional encoded particles for high-throughput biomolecule analysis. Science 315, 1393-1396 (2007). (Pubitemid 46399544)
26. Lee, H., Kim, J., Kim, H., Kim, J. & Kwon, S. Colour-barcoded magnetic microparticles for multiplexed bioassays. Nat. Mater. 9, 745-749 (2010).
27. Chapin, S. C., Appleyard, D. C., Pregibon, D. C. & Doyle, P. S. Rapid microRNA profiling on encoded gel microparticles. Angew. Chem. Int. Ed. 50, 2289-2293 (2011).
28. Chung, S. E., Park, W., Shin, S., Lee, S. A. & Kwon, S. Guided and fluidic self-assembly of microstructures using railed microfluidic channels. Nat. Mater. 7, 581-587 (2008).
29. Shepherd, R. F. et al. stop-flow lithography of colloidal, glass, and silicon microcomponents. Adv. Mater. 20, 4734-4739 (2008).
30. Kim, J. et al. Programming magnetic anisotropy in polymeric microactuators. Nat. Mater. 10, 747-752 (2011).
31. Kim, H. et al. Structural colour printing using a magnetically tunable and lithographically fixable photonic crystal. Nat. Photon. 3, 534-540 (2009).
32. Panda, P. et al. Stop-flow lithography to generate cell-laden microgel particles. Lab. Chip 8, 1056-1061 (2008). (Pubitemid 351904833)
33. Lau, K. K. S. & Gleason, K. K. Particle surface design using an all-dry encapsulation method. Adv. Mater. 18, 1972-1977 (2006). (Pubitemid 44259250)
34. Im, S. G., Bong, K. W., Lee, C. H., Doyle, P. S. & Gleason, K. K. A conformal nano-adhesive via initiated chemical vapor deposition for microfluidic devices. Lab. Chip 9, 411-416 (2009).
35. Xu, J. J. & Gleason, K. K. Conformal, Amine-Functionalized Thin Films by Initiated Chemical Vapor Deposition (iCVD) for Hydrolytically Stable Microfluidic Devices. Chem. Mater. 22, 1732-1738 (2010).
36. Bartolo, D., Degre, G., Nghe, P. & Studer, V. Microfluidic stickers. Lab. Chip 8, 274-279 (2008). (Pubitemid 351191403)
37. Carlborg, C. F., Haraldsson, T., Oberg, K., Malkoch, M. & van der Wijngaart, W. Beyond PDMS: off-stoichiometry thiol-ene (OSTE) based soft lithography for rapid prototyping of microfluidic devices. Lab. Chip 8, 3136-3147 (2011).
38. Sollier, E., Murray, C., Maoddi, P. & Di Carlo, D. Rapid prototyping polymers for microfluidic devices and high pressure injections. Lab. Chip 11, 3752-3765 (2011).
39. Bong, K. W. et al. Compressed-air flow control system. Lab. Chip 11, 743-747 (2011).
40. Simonnet, C. & Groisman, A. Two-dimensional hydrodynamic focusing in a simple microfluidic device. Appl. Phys. Lett. 87, 114104 (2005).
41. Chang, C. C., Huang, Z. X. & Yang, R. J. Three-dimensional hydrodynamic focusing in two-layer polydimethylsiloxane (PDMS) microchannels. J. Micromech. Microeng. 17, 1479-1486 (2007).
42. Futterer, C. et al. Injection and flow control system for microchannels. Lab. Chip 4, 351-356 (2004). (Pubitemid 39150237)
43. Yoon, S. K., Mitchell, M., Choban, E. R. & Kenis, P. J. A. Gravity-induced reorientation of the interface between two liquids of different densities flowing laminarly through a microchannel. Lab. Chip 5, 1259-1263 (2005). (Pubitemid 41626181)
44. Shao, J. H. & Baltus, R. E. Hindered diffusion of dextran and polyethylene glycol in porous membranes. Aiche J. 46, 1149-1156 (2000). (Pubitemid 30423161)
45. O'Neal, D. P. et al. Oxygen sensor based on the fluorescence quenching of a ruthenium complex immobilized in a biocompatible poly(ethylene glycol) hydrogel. IEEE Sens. J. 4, 728-734 (2004).
46. Park, J., Hong, W. & Kim, C. S. Color Intensity Method for Hydrogel Oxygen Sensor Array. IEEE Sens. J. 10, 1855-1862 (2010).
47. Dendukuri, D., Hatton, T. A. & Doyle, P. S. Synthesis and self-assembly of amphiphilic polymeric microparticles. Langmuir 23, 4669-4674 (2007). (Pubitemid 46643206)
48. Choi, S. J., Yoo, P. J., Baek, S. J., Kim, T. W. & Lee, H. H. An ultraviolet- curable mold for sub-100-nm lithography. J. Am. Chem. Soc. 126, 7744-7745 (2004). (Pubitemid 38812744)
49. Weissleder, R. & Ntziachristos, V. Shedding light onto live molecular targets. Nat. Med. 9, 123-128 (2003). (Pubitemid 36098273)
50. Welsher, K., Sherlock, S. P. & Dai, H. J. Deep-tissue anatomical imaging of mice using carbon nanotube fluorophores in the second near-infrared window. Proc. Natl Acad. Sci. USA 108, 8943-8948 (2011).
51. Murray, C. B., Norris, D. J. & Bawendi, M. G. Synthesis and characterization of nearly monodisperse Cde (E=S, Se, Te) semiconductor nanocrystallites. J. Am. Chem. Soc. 115, 8706-8715 (1993).
52. Mellott, M. B., Searcy, K. & Pishko, M. V. Release of protein from highly cross-linked hydrogels of poly (ethylene glycol) diacrylate fabricated by UV polymerization. Biomaterials 22, 929-941 (2001). (Pubitemid 32201444)
53. Strano, M. S. et al. Electronic structure control of single-walled carbon nanotube functionalization. Science 301, 1519-1522 (2003). (Pubitemid 37128540)
54. Usrey, M. L., Lippmann, E. S. & Strano, M. S. Evidence for a two-step mechanism in electronically selective single-walled carbon nanotube reactions. J. Am. Chem. Soc. 127, 16129-16135 (2005). (Pubitemid 41689239)
55. Kim, J. H. et al. The rational design of nitric oxide selectivity in single-walled carbon nanotube near-infrared fluorescence sensors for biological detection. Nat. Chem. 1, 473-481 (2009).
56. Zhang, J. et al. Single molecule detection of nitric oxide enabled by d(AT)(15) DNA adsorbed to near infrared fluorescent single-walled carbon nanotubes. J. Am. Chem. Soc. 133, 567-581 (2011).
57. Shim, T. S., Kim, S. H., Sim, J. Y., Lim, J. M. & Yang, S. M. Dynamic modulation of photonic bandgaps in crystalline colloidal arrays under electric field. Adv. Mater. 22, 4494-4498 (2010).
58. Ozaydin-Ince, G. & Gleason, K. K. Transition between kinetic and mass transfer regimes in the initiated chemical vapor deposition from ethylene glycol diacrylate. J. Vac. Sci. Technol. A 27, 1135-1143 (2009).
59. Mao, Y. & Gleason, K. K. Hot filament chemical vapor deposition of poly(glycidyl methacrylate) thin films using tert-butyl peroxide as an initiator. Langmuir 20, 2484-2488 (2004).