Bond strengths of one-step self-etch adhesives to laser-irradiated and bur-cut dentin after water storage and thermocycling

Photomedicine and Laser Surgery

Volumn 30, Issue 4, 2012, Pages 214-221

  Akin, Gulsah E ^a   Herguner Siso, Seyda ^b   Ozcan, Mutlu ^c   Ozel Bektas, Ozden ^a   Akin, Hakan ^a  

^a CUMHURIYET UNIVERSITY   (Turkey)

^b BEZMIALEM VAKIF UNIVERSITY   (Turkey)

^c UNIVERSITY OF ZURICH   (Switzerland)

Author keywords

[No Author keywords available]

Indexed keywords

ADHESIVE INTERFACES; AGING CONDITIONS; ALTERNATIVE METHODS; CAVITY PREPARATIONS; ER:YAG LASERS; MICRO-TENSILE BOND STRENGTH; ONE-STEP SELF-ETCH ADHESIVE; SELF-ETCH ADHESIVES; STATISTICAL DIFFERENCES; T-TESTS; THERMOCYCLES; UNIVERSAL TESTING MACHINES; WATER CONTROL; WATER STORAGE;

ADHESION; ADHESIVES; BOND STRENGTH (CHEMICAL); LASER BEAM EFFECTS; THERMAL CYCLING;

ERBIUM;

DENTIN BONDING AGENT; RESIN CEMENT;

ANALYSIS OF VARIANCE; ARTICLE; CLINICAL TRIAL; COMPARATIVE STUDY; CONTROLLED CLINICAL TRIAL; CONTROLLED STUDY; DENTAL BONDING; DENTAL SURGERY; DENTIN; EPIDEMIOLOGY; EQUIPMENT; HUMAN; LABORATORY DIAGNOSIS; LOW LEVEL LASER THERAPY; METHODOLOGY; MOLAR TOOTH; RADIATION EXPOSURE; RANDOMIZED CONTROLLED TRIAL; SENSITIVITY AND SPECIFICITY; SOLID STATE LASER; TENSILE STRENGTH; ULTRASTRUCTURE;

ANALYSIS OF VARIANCE; DENTAL BONDING; DENTAL CAVITY PREPARATION; DENTIN; DENTIN-BONDING AGENTS; EQUIPMENT FAILURE ANALYSIS; HUMANS; LASER THERAPY, LOW-LEVEL; LASERS, SOLID-STATE; MOLAR; RESIN CEMENTS; SAMPLING STUDIES; SENSITIVITY AND SPECIFICITY; SPECIMEN HANDLING; TENSILE STRENGTH;

EID: 84859585190     PISSN: 15495418     EISSN: None     Source Type: Journal    
DOI: 10.1089/pho.2011.3170     Document Type: Article

References (32)

1. Spreafico, D., Semeraro, S., Mezzanzanica, D., et al. (2006). The effect of the air-blowing step on the technique sensitivity of four different adhesive systems. J. Dent. 34, 237-244. (Pubitemid 43199804)
2. do Amaral, R.C., Stanislawczuk, R., Zander-Grande, C., Michel, M.D., Reis, A., and Loguercio, A.D. (2009). Active application improves the bonding performance of self-etch adhesives to dentin. J. Dent. 37, 82-90.
3. De Munck, J., Van Landuyt, K., Peumans, M., et al. (2005). A critical review of the durability of adhesion to tooth tissue: Methods and results. J. Dent. Res. 84, 118-132. (Pubitemid 43822043)
4. Hiraishi, N., Breschi, L., Prati, C., Ferrari, M., Tagami, J., and King, N.M. (2007). Technique sensitivity associated with air-drying of HEMA-free, single-bottle, one-step self-etch adhesives. Dent. Mater. 23, 498-505. (Pubitemid 46281291)
5. Asaka, Y., Amano, S., Rikuta, A., et al. (2007). Influence of thermal cycling on dentin bond strengths of single-step selfetch adhesive systems. Oper. Dent. 32, 73-78.
6. Monticelli, F., Osorio, R., Pisani-Proeņa, J., and Toledano, M. (2007). Resistance to degradation of resin-dentin bonds using a one-step HEMA-free adhesive. J. Dent. 35, 181-186.
7. Margvelashvili, M., Goracci, C., Beloica, M., Papacchini, F., and Ferrari, M. (2010). In vitro evaluation of bonding effectiveness to dentin of all-in-one adhesives. J. Dent. 38, 106-112.
8. Hashimoto, M., Fujita, S., Kaga, M., and Yawaka, Y. (2008). Effect of water on bonding of one-bottle self-etching adhesives. Dent. Mater. J. 27, 172-178.
9. Ozel-Bektas, O., Herguner-Siso, S., and Akin, E.G. (2011). Effect of thermal cycling on microtensile bond strengths of various adhesives to dentin. Cumhuriyet. Dent.J. 14, 12-17.
10. Tsuchiya, H., Tsubota, K., Iwasa, M., Ando, S., Miyazaki, M., and Platt, J.A. (2010). Influence of adhesive application time on enamel bond strength of single-step self-etch adhesive systems. Oper. Dent. 35, 77-83.
11. do Amaral, F.L., Colucci, V., de Souza-Gabriel, A.E., Chinelatti, M.A., Palma-Dibb, R.G., and Corona, S.A. (2008). Adhesion to Er:YAG laser-prepared dentin after long-term water storage and thermocycling. Oper. Dent. 33, 51-58.
12. Souza-Zaroni, W.C., Chinelatti, M.A., Delfino, C.S., Pécora, J.D., Palma-Dibb, R.G., and Corona, S.A. (2008). Adhesion of a self-etching system to dental substrate prepared by Er:YAG laser or air abrasion. J. Biomed. Mater. Res. B. Appl. Biomater. 86B, 321-329.
13. Korkmaz, Y., Ozel, E., Attar, N., Bicer, C.O., and Firatli, E. (2010). Microleakage and scanning electron microscopy evaluation of all-in-one self-etch adhesives and their respective nanocomposites prepared by erbium:yttrium- aluminum- garnet laser and bur. Lasers Med. Sci. 25, 493-502.
14. Botta, S.B., Vieira, S.N., Cordon, R., Marques, M.M., and Matos, A.B. (2009). Can the method of primer application influence adhesion to Er:YAG-laser irradiated dentin? J. Contemp. Dent. Pract. 10, 49-57.
15. Trajtenberg, C.P., Pereira, P.N., and Powers, J.M. (2004). Resin bond strength and micromorphology of human teeth prepared with an Erbium:YAG laser. Am. J. Dent. 17, 331-336.
16. Lee, B.S., Lin, P.Y., Chen, M.H., et al. (2007). Tensile bond strength of Er,Cr:YSGG laser-irradiated human dentin and analysis of dentin-resin interface. Dent. Mater. 23, 570-578.
17. De Munck, J., Van Meerbeek, B., Yudhira, R., Lambrechts, P., and Vanherle, G. (2002). Micro-tensile bond strength of two adhesives to Erbium:YAG-lased vs. bur-cut enamel and dentin. Eur. J. Oral. Sci. 110, 322-329.
18. Malmström, H.S., Chaves, Y., and Moss, M.E. (2003). Patient preference: Conventional rotary handpieces or air abrasion for cavity preparation. Oper. Dent. 28, 667-671. (Pubitemid 37456946)
19. Cardoso, M.V., Coutinho. E., Ermis, R.B., et al. (2008). Influence of Er,Cr:YSGG laser treatment on the microtensile bond strength of adhesives to dentin. J. Adhes. Dent. 10, 25-33.
20. Bader, C., and Krejci, I. (2006). Indications and limitations of Er:YAG laser applications in dentistry. Am. J. Dent. 19, 178-186. (Pubitemid 44182120)
21. El Araby, A.M., and Talic, Y.F. (2007). The effect of thermocycling on the adhesion of self-etching adhesives on dental enamel and dentin. J. Contemp. Dent. Pract. 8, 17-24.
22. De Munck, J., Van Landuyt, K., Coutinho, E., et al. (2005). Micro-tensile bond strength of adhesives bonded to class-I cavity-bottom dentin after thermo-cycling. Dent. Mater. 21, 999-1007. (Pubitemid 41475538)
23. Abdalla, A.I., and Feilzer, A.J. (2008). Four-year water degradation of a total-etch and two self-etching adhesives bonded to dentin. J. Dent. 36, 611-617.
24. Amaral, F.L., Colucci, V., Souza-Gabriel, A.E., Chinelatti, M.A., Palma-Dibb, R.G., and Corona, S.A. (2010). Bond durability in erbium:yttrium-aluminum-garnet laser-irradiated enamel. Lasers Med. Sci. 25, 155-163.
25. Firat, E., Gurgan, S., and Gutknecht, N. (2012). Microtensile bond strength of an etch-and-rinse adhesive to enamel and dentin after Er:YAG laser pretreatment with different pulse durations. Lasers Med. Sci. 27, 15-21.
26. Akin, H., Tugut, F., Emine, Akin, G., Guney, U., and Mutaf, B. (2012). Effect of Er:YAG laser application on the shear bond strength and microleakage between resin cements and Y-TZP ceramics. Lasers Med. Sci. 27, 333-338.
27. Malkoc, M.A., Tasxdemir, S.T., Ozturk, A.N., Ozturk, B., and Berk, G. (2011). Effects of laser and acid etching and air abrasion on mineral content of dentin. Lasers Med. Sci. 26, 21-27.
28. Korkmaz, Y., Ozel, E., Attar, N., and Ozge, Bicer, C. (2010). Influence of different conditioning methods on the shear bond strength of novel light-curing nano-ionomer restorative to enamel and dentin. Lasers Med. Sci. 25, 861-866.
29. Frankenberger, R., Strobel, W.O., Lohbauer, U., Kramer, N., and Petschelt, A. (2004). The effect of six years of water storage on resin composite bonding to human dentin. J. Biomed. Mater. Res. B. Appl. Biomater. 69B, 25-32. (Pubitemid 38391995)
30. Foxton, R.M., Melo, L., Stone, D.G., Pilecki, P., Sherriff, M., and Watson, T.F. (2008). Long-term durability of one-step adhesive composite systems to enamel and dentin. Oper. Dent. 33, 651-657.
31. Ülker, M., Özcan, M., Sxengün, A., Özer, F., and Belli, S. (2010). Effect of artificial aging regimens on the performance of self-etching adhesives. J. Biomed. Mater. Res. B. Appl. Biomater. 93B, 175-184.
32. Asaka, Y., Yamaguchi, K., Inage, H., et al. (2006). Effect of thermal cycling on bond strengths of single-step self-etch adhesives to bovine dentin. J. Oral. Sci. 48, 63-69.