Adhesion of a self-etching system to dental substrate prepared by Er:YAG laser or air abrasion

Journal of Biomedical Materials Research - Part B Applied Biomaterials

Volumn 86, Issue 2, 2008, Pages 321-329

  Souza Zaroni, Wanessa C ^a   Chinelatti, Michelle A ^a,b   Delfino, Carina S ^a   Pécora, Jesus D ^a   Palma Dibb, Regina G ^a   Corona, Silmara A M ^a  

^a Disciplines of Genetics and Molecular Biology   (Brazil)

^b UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

Adhesion; Air abrasion; Er:YAG laser; Microtensile bond strength; Self etching system

Indexed keywords

ABRASION; BOND (MASONRY); BOND STRENGTH (MATERIALS); ELECTRON IRRADIATION; ENAMELS; ETCHING; IMAGING TECHNIQUES; LASERS; PULSED LASER DEPOSITION; STANDARDS; STRENGTH OF MATERIALS; TRIBOLOGY;

ADHESIVE INTERFACES; ADHESIVE SYSTEMS; AIR ABRASION; CROSS SECTIONAL AREA (CSA); ELECTRON MICROSCOPY (TEM AND SEM); ER:YAG LASERS; MICROTENSILE BOND STRENGTH (MTBS); SELF ETCHING; SELF-ETCHING SYSTEM;

ERBIUM;

ADHESIVE AGENT; DENTIN BONDING AGENT; RESIN;

ADHESION; AIR; ANALYSIS OF VARIANCE; ARTICLE; CHEMICAL BOND; COMPOSITE MATERIAL; DENTAL ETCHING; DENTIN; DRILL; ENAMEL; ERBIUM YAG LASER; MOLAR TOOTH; MORPHOLOGY; RANDOMIZATION; SCANNING ELECTRON MICROSCOPY; STANDARD; TENSILE STRENGTH;

ADHESIVENESS; AIR ABRASION, DENTAL; DENTAL BONDING; DENTAL ETCHING; HUMANS; LASERS; MATERIALS TESTING; MOLAR, THIRD; RESIN CEMENTS; TENSILE STRENGTH;

EID: 47949122673     PISSN: 15524973     EISSN: 15524981     Source Type: Journal    
DOI: 10.1002/jbm.b.31020     Document Type: Article

References (59)

1. Perdigão J, Frankenberger R, Rosa BT, Breschi L. New trends in dentin/enamel adhesion. Am J Dent 2000;13:25D-30D.
2. Tay FR, Kwong SM, Itthagarun A, King NM, Yip HK, Moulding KM, Pashley DH. Bonding of a self-etching primer to non-carious cervical sclerotic dentin: Interfacial ultrastructure and microtensile bond strength evaluation. J Adhes Dent 2000;2:9-28.
3. Tay FR, Carvalho R, Sano H, Pashley DH. Effect of smear layers on the bonding of a self-etching primer to dentin. J Adhes Dent 2000;2:99-116.
4. Tay FR, Sano H, Carvalho R, Pashley EL, Pashley DH. An ultrastructural study of the influence of acidity of self-etching primers and smear layer thickness on bonding to intact dentin. J Adhes Dent 2000;2:83-98.
5. Toledano M, Osorio R, de Leonardi G, Rosales-Leal JI, Ceballos L, Cabrerizo-Vilchez MA. Influence of self-etching primer on the resin adhesion to enamel and dentin. Am J Dent 2001;14:205-210.
6. Van Meerbeek B, De Munck J, Mattar D, Van Landuyt K, Lambrechts Pb. Microtensile bond strengths of an etch&rinse and self-etch adhesive to enamel and dentins as a function of surface treatment. Oper Dent 2003;28:647-660.
7. Oliveira DC, Manhães LA, Marques MM, Matos AB. Microtensile bond strength analysis of different adhesive systems and dentin prepared with high-speed and Er:YAG laser: A comparative study. Photomed Laser Surg 2005;23:219-224.
8. Dunn WJ, Davis JT, Bush AC. Shear bond strength and SEM evaluation of composite bonded to Er:YAG laser-prepared dentin and enamel. Dent Mat 2005;21:616-624.
9. Delfino CS, Souza-Zaroni WC, Corona SA, Palma-Dibb RG. Microtensile bond strength of composite resin to human enamel prepared using erbium: Yttrium aluminum garnet laser. J Biomed Mater Res A 2007;80:475-479.
10. Borsatto MC, Corona SA, Chinelatti MA, Ramos RP, de Sa Rocha RA, Pecora JD, Palma-Dibb RG. Comparison of marginal microleakage of flowable composite restorations in primary molars prepared by high-speed carbide bur, Er:YAG laser, and air abrasion. J Dent Child 2006;73:122-126.
11. Hossain M, Nakamura Y, Murakami Y, Yamada Y, Matsumoto K. A comparative study on compositional changes and Knoop hardness measurement of the cavity floor prepared by Er:YAG laser irradiation and mechanical bur cavity. J Clin Laser Med Surg 2003;21:29-33.
12. Malmström HS, Chaves Y, Moss ME. Patient preference: Conventional rotary handpieces or air abrasion for cavity preparation. Oper Dent 2003;28:667-671.
13. Rainey JT. Air abrasion: An emerging standard of care in conservative operative dentistry. Dent Clin N Am 2002;46:185-209.
14. Reyto R. Lasers and air abrasion. New modalities for tooth preparation. Dent Clin N Am 2001;45:189-206.
15. White JM, Eakle WS. Rationale and treatment approach in minimally invasive dentistry. J Am Dent Assoc 2000;131:13S-14S.
16. Keller U, Hibst R. Experimental studies of the application of the Er:YAG laser on dental hard substances. II. Light microscopic and SEM investigations. Lasers Surg Med 1989;9:345-351.
17. Burkes EJ, Hoke J, Gomes E, Wolbarsht M. Wet versus dry enamel ablation by Er:YAG laser. J Prosth Dent 1992;67:847-851.
18. Eguro T, Maeda T, Tanabe M, Otsuki M, Tanaka H. Adhesion of composite resins to enamel irradiated by the Er:YAG laser: Application of the ultrasonic scaler on irradiated surface. Lasers Surg Med 2001;28:365-370.
19. Horiguchi S, Yamada T, Inokoshi S, Tagami J. Selective caries removal with air abrasion. Oper Dent 1998;23:236-243.
20. Banerjee A. Applications of scanning microscopy in the assessment of dentine caries and methods for its removal; PhD Thesis University of London, 1999.
21. Banerjee A, Kidd EAM, Watson TF. In vitro evaluation of five alternative methods of carious dentine excavation. Caries Res 2000;34:144-150.
22. Yap AUJ, Quek CEY, Kau CH. Repair of new-generation tooth-colored restoratives: Methods of surface conditioning to achieve bonding. Oper Dent 1998;23:173-178.
23. Laurell K, Lord W, Beck M. Kinetic cavity preparation effects on bonding to enamel and dentin. J Dent Res 1993;72(Sp Iss):283, Abstract 1437.
24. Keen DS, Von Fraunhofer JA, Parkins FM. Air abrasive "etching": composite bond strengths. J Dent Res 1994;73(Sp Iss):131, Abstract 238.
25. Doty WD, Pettey D, Holder R, Phillips S. KCP 2000 enamel etching abilities tested. J Dent Res 1994;73(Sp Iss):411, Abstract 2474.
26. Manhart J, Mehl A, Schroeter R, Obster B, Hickel R. Bond Strength of composite to dentin treated by air abrasion. Oper Dent 1999;24:223-232.
27. Valentino MF, Nathanson D. Evaluation of an air-abrasion preparation system for bonded restorations. J Dent Res 1996;75(Sp Iss):127, Abstract 878.
28. Chimello DT, Ramos RP, Chinelatti MA, Palma-Dibb RG, Pecora JD, Corona SAM. Effect of Er:YAG laser and air abrasion on the tensile bond strength of two adhesive restorative systems to dentin. J Oral Laser Appl 2002;2:223-229.
29. Los AS, Barkmeier WW. Effects of dentin air abrasion with aluminum oxide and hidroxyapatite and adhesive bond strength. Oper Dent 1994;19:169-206.
30. Laurell KA, Hess JA. Scanning electron micrographic effects of air-abrasion cavity preparation on human enamel and dentin. Quintessence Int 1995;26:139-144.
31. Peruchi C, Pinto LS, Pinto AS, Silva EB. Evaluation of cutting patterns produced in primary teeth by an air-abrasion system. Quintessence Int 2002;33:279-283.
32. Santos-Pinto L, Peruchi C, Marker VA, Cordeiro R. Effect of handpiece tip design on the cutting efficiency of an air abrasion system. Am J Dent 2001;14:397-401.
33. Li ZZ, Code JE, Van de Merwe WP. Er:YAG laser ablation of enamel and dentin of human teeth: Determination of ablation rates at various fluences and pulse repetition rates. Lasers Surg Med 1992;12:625-630.
34. Hossain M, Nakamura Y, Yamada Y, Kimura Y, Nakamura G, Matsumoto KL. Ablation depth and morphological changes in human enamel and dentin after Er:YAG laser irradiation with or without water mist. J Clin Laser Med Surg 1999;17:105-109.
35. Chimello-Sousa DT, de Souza AE, Chinelatti MA, Pecora JD, Palma-Dibb RG, Milori Corona SA. Influence of Er:YAG laser irradiation distance on the bond strength of a restorative system to enamel. J Dent 2006;34:245-251.
36. Reis LS, Chinelatti MA, Corona SAM, Palma-Dibb RG, Borsatto MC. Influence of air abrasion preparation on microleakage in glass ionomer cement restorations. J Mater Sci Mater Med 2004;15:1213-1216.
37. Van Meerbeek B, De Munck J, Yoshida Y, Inoue S, Vargas M, Vijay P, Van Landuyt K, Lambrechts P, Vanherle G. Buonocore memorial lecture. Adhesion to enamel and dentin: Current status and future challenges. Oper Dent 2003;28:215-235.
38. Nakabayashi N, Saimi Y. Bonding to intact dentin. J Dent Res 1996;75:1706-1715.
39. Chigira H, Yukitani W, Hasegawa T, Manabe A, Itoh K, Hayakawa T, Debari K, Wakumoto S, Hisamitsu H. Self-etching dentin primers containing phenyl-P. J Dent Res 1994;73:1088-1095.
40. Watanabe I, Nakabayashi N, Pashley DH. Bonding to ground dentin by a phenyl-P self-etching primer. J Dent Res 1994;73:1212-1220.
41. Hayakawa T, Kikutake K, Nemoto K. Influence of self-etching primer treatment on the adhesion of resin composite to polished dentin and enamel. Dent Mater 1998;14:99-105.
42. Tay FR, Pashley DH. Aggressiveness of contemporary self-etching systems. I. Depth of penetration beyond dentin smear layers. Dent Mater 2001;17:296-308.
43. Pradelle-Plasse N, Colon P, Wenger F, Picard B. Quantitative evaluation of self-etching primer action on dentin permeability: A correlation between impedance measurements and acidity. Am J Dent 2004;17:131-136.
44. Chigira H, Koike T, Hasegawa T, Itoh K, Wakumoto S, Hayakawa T. Effect of the self etching dentin primers on the bonding efficacy of a dentin adhesive. Dent Mater J 1989;8:86-92.
45. Nishiyama N, Suzuki K, Takahashi K, Nemoto K. The pKa effects of the carboxylic acid in N-methacryloyl-omega-amino acid on the demineralization and bond strengths to the teeth. Biomaterials 2004;25:5441-5447.
46. Anseth KS, Scott RA, Peppas NA. Effects of ionization on the reaction behavior and kinetics of acrylic acid polymerizations. Macromolecules 1996;29:8308-8312.
47. Sakakibara Y, Ishimaru K, Asano S, Takamizu M, Gotoh S, Kohno A. Morphological change of tooth surface irradiated by Er:YAG laser. Proceedings of the 4th International Congress on Lasers in Dentistry 1994;163-166.
48. Ishikawa I, Aoki A, Watanabe H, Yamada T, Otsuki M, Ando Y, Arakawa S, Tagami J, Yamamoto H. Erbium:YAG laser, promising procedure for caries treatment. Dent Jpn 1997;33:165-169.
49. Tanji EY, Matsumoto K, Eduardo CP. Study of dentin surface conditioning with laser Er:YAG laser. J Dent Res 1997;76:987.
50. Hossain M, Nakamura Y, Yamada Y, Kimura Y, Nakamura G, Matsumoto K. Ablation depths and morphological changes in human enamel and dentin after Er:YAG laser irradiation with or without water mist. J Clin Laser Med Surg 1999;17:105-109.
51. Armengol V, Jean A, Rohanizadeh R, Hamel H. Scanning electron microscopic analysis of diseased and healthy dental hard tissues after Er:YAG laser irradiation: In vitro study. J Endodont 1999;25:543-546.
52. Arimoto N, Suzaki A, Sakuma K, Kashihara S, Yamada M, Senda A. Microstructural changes in dentin irradiated by Er:YAG laser. J Dent Res 1999;78(Sp Iss):1703.
53. Nishimura Y, Eguro T, Maeda T, Tanaka H. Effects of the Er:YAG laser irradiation on human sound dentin. Jpn J Cons Dent 2000;43:149.
54. Eguro T, Maeda T, Otsuki M, Nishimura Y, Katsuumi I, Tanaka H. Adhesion of Er:YAG laser-irradiated dentin and composite resins: Application of various treatments on irradiated surface. Lasers Surg Med 2002;30:267-272.
55. Ceballos L, Toledano M, Osorio R, Tay FR, Marshall GW. Bonding to Er-YAG-laser-treated dentin. J Dent Res 2002;81:119-122.
56. Jassem HA, Retief DH, Jamison HC. Tensile and shear strengths of bonded and rebonded orthodontic attachments. Am J Orthodont 1981;79:661-668.
57. Bester SP, De Wet FA, Nel JC, Deriessen CH. The effect of airborne particle abrasion on the dentin smear layer and dentin: An in vitro investigation. Int J Prosthodont 1995;8:46-50.
58. Rolla JN, Mota EG, Oshima HMS, Burnett LH, Spohr AM. Nd:YAG Laser influence on microtensile bond strength of different adhesive systems for human dentin. Photomed Laser Surg 2006;24:730-734.
59. Asaka Y, Miyazaki M, Takamizawa T, Tsubota K, Moore BK. Influence of delated placement of composite over cured adhesives on dentin bond strength of single-application self-etch systems. Oper Dent 2006;31:18-24.