Biological properties of solid free form designed ceramic scaffolds with bmp-2: In vitro and in vivo evaluation

PLoS ONE

Volumn 7, Issue 3, 2012, Pages

  Abarrategi, Ander ^a,b   Moreno Vicente, Carolina ^a   Martínez Vázquez, Francisco Javier ^c   Civantos, Ana ^a   Ramos, Viviana ^d   Sanz Casado, José Vicente ^a   Martínez Corriá, Ramón ^a   Perera, Fidel Hugo ^c   Mulero, Francisca ^e   Miranda, Pedro ^c   López Lacomba, José Luís ^a  

^a UNIVERSIDAD COMPLUTENSE DE MADRID   (Spain)

^b INSTITUTO DE SALUD CARLOS III   (Spain)

^c UNIVERSITY OF EXTREMADURA   (Spain)

^d San Sebastián de los Reyes   (Spain)

^e Centro Nacional de Investigaciones Oncológicas   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

BIOCERAMICS; CERAMIC SCAFFOLD; RECOMBINANT BONE MORPHOGENETIC PROTEIN 2; TISSUE SCAFFOLD; UNCLASSIFIED DRUG; ALKALINE PHOSPHATASE; BIOMATERIAL; BONE MORPHOGENETIC PROTEIN 2;

ANALYTICAL PARAMETERS; ANIMAL CELL; ANIMAL EXPERIMENT; ANIMAL MODEL; ANIMAL TISSUE; ARTICLE; BIOCOMPATIBILITY; BONE DEFECT; BONE TRANSPLANTATION; CELL GROWTH; CONTROLLED STUDY; IN VITRO STUDY; IN VIVO STUDY; JAW DISEASE; MALE; MAXILLOFACIAL SURGERY; MOUSE; NONHUMAN; OSSIFICATION; PORE SIZE; POROSITY; RABBIT; SOLID FREE FORM FABRICATION; SWINE; THREE DIMENSIONAL IMAGING; TISSUE ENGINEERING; TISSUE GROWTH; TISSUE REGENERATION; ANIMAL; BONE; BONE REGENERATION; CELL ADHESION; CELL LINE; CERAMICS; CHEMISTRY; COMPUTER ASSISTED TOMOGRAPHY; DRUG EFFECT; MAXILLA; METABOLISM; PATHOLOGY; SKELETAL MUSCLE; TRANSPLANTATION;

SUIDAE;

ALKALINE PHOSPHATASE; ANIMALS; BIOCOMPATIBLE MATERIALS; BONE AND BONES; BONE MORPHOGENETIC PROTEIN 2; BONE REGENERATION; BONE TRANSPLANTATION; CELL ADHESION; CELL LINE; CERAMICS; MAXILLA; MICE; MODELS, ANIMAL; MUSCLE, SKELETAL; POROSITY; RABBITS; SWINE; TISSUE ENGINEERING; TOMOGRAPHY, X-RAY COMPUTED;

EID: 84859068487     PISSN: None     EISSN: 19326203     Source Type: Journal    
DOI: 10.1371/journal.pone.0034117     Document Type: Article

References (55)

1. Yuan H, Yang Z, Li Y, Zhang X, De Bruijn J, et al. (1998) Osteoinduction by calcium phosphate biomaterials. J Mater Sci Mater Med 9 (12): 723-726.
2. Dorozhkin SV, (2007) Calcium orthophosphates. J Mater Sci 42 (4): 1061-1095.
3. Hench L, (1991) Bioceramics: From concept to clinic. J Am Ceram Soc 74 (7): 1487-1510.
4. Heini PF, Berlemann U, (2001) Bone substitutes in vertebroplasty. Eur Spine J 10 (Suppl 2): S205-13.
5. Sanchez-Salcedo S, Izquierdo-Barba I, Arcos D, Vallet-Regi M, (2006) In vitro evaluation of potential calcium phosphate scaffolds for tissue engineering. Tissue Eng 12 (2): 279-290.
6. Karageorgiou V, Kaplan D, (2005) Porosity of 3D biomaterial scaffolds and osteogenesis. Biomaterials 26 (27): 5474-5491.
7. Kwon S, Jun Y, Hong S, Lee I, Kim H, et al. (2002) Calcium phosphate bioceramics with various porosities and dissolution rates. J Am Ceram Soc 85 (12): 3129-3131.
8. Metsger DS, Rieger MR, Foreman DW, (1999) Mechanical properties of sintered hydroxyapatite and tricalcium phosphate ceramic. J Mater Sci Mater Med 10 (1): 9-17.
9. Yeong WY, Chua CK, Leong KF, Chandrasekaran M, (2004) Rapid prototyping in tissue engineering: Challenges and potential. Trends Biotechnol 22 (12): 643-652.
10. Sachlos E, Czernuszka JT, (2003) Making tissue engineering scaffolds work. review: The application of solid freeform fabrication technology to the production of tissue engineering scaffolds. Eur Cell Mater 5: 29-39 discussion 39-40.
11. Pham DT, Dimov SS, (2000) Rapid prototyping processes. In: Pham DT, Dimov SS, editors. Rapid Manufacturing: the Technologies and Applications of Rapid Prototyping and Rapid Tooling London Springer pp. 19-42.
12. Chu TM, Orton DG, Hollister SJ, Feinberg SE, Halloran JW, (2002) Mechanical and in vivo performance of hydroxyapatite implants with controlled architectures. Biomaterials 23 (5): 1283-1293.
13. Tay BY, Evans JRG, Edirisinghe MJ, (2003) Solid freeform fabrication of ceramics. International Materials Reviews 48 (6): 341-370.
14. Cesarano J, Segalman R, Calvert P, (1998) Robocasting provides moldless fabrication from slurry deposition. Ceramic Industry 148 (4).
15. Smay JE, Cesarano J III, Lewis JA, (2002) Colloidal inks for directed assembly of 3-D periodic structures. Langmuir 18 (14): 5429-5437.
16. Miranda P, Saiz E, Gryn K, Tomsia AP, (2006) Sintering and robocasting of beta-tricalcium phosphate scaffolds for orthopaedic applications. Acta Biomater 2 (4): 457-466.
17. Miranda P, Pajares A, Saiz E, Tomsia AP, Guiberteau F, (2008) Mechanical properties of calcium phosphate scaffolds fabricated by robocasting. J Biomed Mater Res A 85 (1): 218-227.
18. Saiz E, Gremillard L, Menendez G, Miranda P, Gryn K, et al. (2007) Preparation of porous hydroxyapatite scaffolds. Materials Science and Engineering: C 27 (3): 546-550.
19. Miranda P, Pajares A, Guiberteau F, (2008) Finite element modeling as a tool for predicting the fracture behavior of robocast scaffolds. Acta Biomater 4 (6): 1715-1724.
20. Miranda P, Pajares A, Saiz E, Tomsia AP, Guiberteau F, (2007) Fracture modes under uniaxial compression in hydroxyapatite scaffolds fabricated by robocasting. J Biomed Mater Res A 83 (3): 646-655.
21. Zhang H, Lin CY, Hollister SJ, (2009) The interaction between bone marrow stromal cells and RGD-modified three-dimensional porous polycaprolactone scaffolds. Biomaterials 30 (25): 4063-4069.
22. Warnke PH, Seitz H, Warnke F, Becker ST, Sivananthan S, et al. (2010) Ceramic scaffolds produced by computer-assisted 3D printing and sintering: Characterization and biocompatibility investigations. J Biomed Mater Res B Appl Biomater 93 (1): 212-217.
23. Shim JH, Kim JY, Park M, Park J, Cho DW, (2011) Development of a hybrid scaffold with synthetic biomaterials and hydrogel using solid freeform fabrication technology. Biofabrication 3 (3): 034102.
24. Habibovic P, Gbureck U, Doillon CJ, Bassett DC, van Blitterswijk CA, et al. (2008) Osteoconduction and osteoinduction of low-temperature 3D printed bioceramic implants. Biomaterials 29: 944-953.
25. Becker ST, Bolte H, Krapf O, Seitz H, Douglas T, et al. (2009) Endocultivation: 3D printed customized porous scaffolds for heterotopic bone induction. Oral Oncol 45 (11): e181-8.
26. Kim JY, Jin GZ, Park IS, Kim JN, Chun SY, et al. (2010) Evaluation of solid free-form fabrication-based scaffolds seeded with osteoblasts and human umbilical vein endothelial cells for use in vivo osteogenesis. Tissue Eng Part A 16 (7): 2229-2236.
27. Kang SW, Kim JS, Park KS, Cha BH, Shim JH, et al. (2011) Surface modification with fibrin/hyaluronic acid hydrogel on solid-free form-based scaffolds followed by BMP-2 loading to enhance bone regeneration. Bone 48 (2): 298-306.
28. Simon JL, Michna S, Lewis JA, Rekow ED, Thompson VP, et al. (2007) In vivo bone response to 3D periodic hydroxyapatite scaffolds assembled by direct ink writing. J Biomed Mater Res A 83 (3): 747-758.
29. Hoshino M, Egi T, Terai H, Namikawa T, Takaoka K, (2006) Repair of long intercalated rib defects using porous beta-tricalcium phosphate cylinders containing recombinant human bone morphogenetic protein-2 in dogs. Biomaterials 27 (28): 4934-4940.
30. Jingushi S, Urabe K, Okazaki K, Hirata G, Sakai A, et al. (2002) Intramuscular bone induction by human recombinant bone morphogenetic protein-2 with beta-tricalcium phosphate as a carrier: In vivo bone banking for muscle-pedicle autograft. J Orthop Sci 7 (4): 490-494.
31. Liang G, Yang Y, Oh S, Ong JL, Zheng C, et al. (2005) Ectopic osteoinduction and early degradation of recombinant human bone morphogenetic protein-2-loaded porous beta-tricalcium phosphate in mice. Biomaterials 26 (20): 4265-4271.
32. Abarrategi A, Moreno-Vicente C, Ramos V, Aranaz I, Casado JV, et al. (2008) Improvement of porous beta-TCP scaffolds with rhBMP-2 chitosan carrier film for bone tissue application. Tissue Eng Part A 14 (8): 1305-1319.
33. LeGeros RZ, Daculsi G, LeGeros JP, (2008) Bioactive bioceramics. Musculoskeletal Tissue Regeneration: Biological Materials and Methods New Jersey Humana press pp. 153-181.
34. Ripamonti U, Crooks J, Kirkbride A, (1999) Sintered porous hydroxyapatites with intrinsic osteoinductive activity: Geometric induction of bone formation. S Afr J Sci 95 (8): 335-343.
35. Daculsi G, LeGeros RZ, Grimandi G, Soueidan A, Aguado E, et al. (2008) Effect of sintering process of HA/TCP bioceramics on microstructure, dissolution, cell proliferation and bone ingrowth. Key Eng Mat 361363: 1139-1142.
36. Perera FH, Martínez-Vázquez FJ, Miranda P, Ortíz ÁL, Pajares A, (2010) Clarifying the effect of sintering conditions on the microstructure and mechanical properties of β-tricalcium phosphate. Ceramics International 36: 1929-1935.
37. Katagiri T, Yamaguchi A, Komaki M, Abe E, Takahashi N, et al. (1994) Bone morphogenetic protein-2 converts the differentiation pathway of C2C12 myoblasts into the osteoblast lineage. J Cell Biol 127 (6 Pt 1): 1755-1766.
38. Rauch C, Brunet AC, Deleule J, Farge E, (2002) C2C12 myoblast/osteoblast transdifferentiation steps enhanced by epigenetic inhibition of BMP2 endocytosis. Am J Physiol Cell Physiol 283 (1): C235-43.
39. Smith E, Yang J, McGann L, Sebald W, Uludag H, (2005) RGD-grafted thermoreversible polymers to facilitate attachment of BMP-2 responsive C2C12 cells. Biomaterials 26 (35): 7329-7338.
40. Lopez-Lacomba JL, Garcia-Cantalejo JM, Sanz Casado JV, Abarrategi A, Correas Magana V, et al. (2006) Use of rhBMP-2 activated chitosan films to improve osseointegration. Biomacromolecules 7 (3): 792-798.
41. Abarrategi A, García-Cantalejo J, Moreno-Vicente C, Civantos A, Ramos V, et al. (2009) Gene expression profile on chitosan/rhBMP-2 films: A novel osteoinductive coating for implantable materials. Acta Biomaterialia 5 (7): 2633-2646.
42. Abarrategi A, Civantos A, Ramos V, Sanz Casado JV, Lopez-Lacomba JL, (2008) Chitosan film as rhBMP2 carrier: Delivery properties for bone tissue application. Biomacromolecules 9 (2): 711-718.
43. Kuboki Y, Jin Q, Takita H, (2001) Geometry of carriers controlling phenotypic expression in BMP-induced osteogenesis and chondrogenesis. The Journal of Bone and Joint Surgery 83 (90012): 105-115.
44. Lan Levengood SK, Polak SJ, Poellmann MJ, Hoelzle DJ, Maki AJ, et al. (2010) The effect of BMP-2 on micro- and macroscale osteointegration of biphasic calcium phosphate scaffolds with multiscale porosity. Acta Biomater 6 (8): 3283-3291.
45. Mouriño V, Boccaccini AR, (2010) Bone tissue engineering therapeutics: Controlled drug delivery in three-dimensional scaffolds. Journal of the Royal Society Interface 7 (43): 209.
46. Lópiz-Morales Y, Abarrategi A, Ramos V, Moreno-Vicente C, López-Durán L, et al. (2010) In vivo comparison of the effects of rhBMP-2 and rhBMP-4 in osteochondral tissue regeneration. European Cells and Materials 20: 367-378.
47. Yamamoto M, Tabata Y, Ikada Y, (1998) Ectopic bone formation induced by biodegradable hydrogels incorporating bone morphogenetic protein. J Biomater Sci Polym Ed 9 (5): 439-458.
48. Nakamura Y, Wakitani S, Nakayama J, Wakabayashi S, Horiuchi H, et al. (2003) Temporal and spatial expression profiles of BMP receptors and noggin during BMP-2-induced ectopic bone formation. J Bone Miner Res 18 (10): 1854-1862.
49. Hall J, Sorensen RG, Wozney JM, Wikesjo UM, (2007) Bone formation at rhBMP-2-coated titanium implants in the rat ectopic model. J Clin Periodontol 34 (5): 444-451.
50. Yuan H, De Bruijn JD, Zhang X, Van Blitterswijk CA, De Groot K, (2001) Use of an osteoinductive biomaterial as a bone morphogenetic protein carrier. J Mater Sci Mater Med 12 (9): 761-766.
51. Hollister SJ, (2009) Scaffold engineering: A bridge to where? Biofabrication 1 (1): 012001.
52. Hollister SJ, (2009) Scaffold design and manufacturing: From concept to clinic. Adv Mater 21 (32-33): 3330-3342.
53. Hollister SJ, Murphy WL, (2011) Scaffold translation: Barriers between concept and clinic. Tissue Eng Part B Rev 17 (6): 459-474.
54. Evans CH, (2011) Barriers to the clinical translation of orthopedic tissue engineering. Tissue Eng Part B Rev 17 (6): 437-441.
55. O'Keefe RJ, Mao J, (2011) Bone tissue engineering and regeneration: From discovery to the clinic-an overview. Tissue Eng Part B Rev 17 (6): 389-392.