Influence of machining parameters and new nano-coated tool on drilling performance of CFRP/Aluminium sandwich

Composites Part B: Engineering

Volumn 43, Issue 3, 2012, Pages 1480-1488

  Zitoune, Redouane ^a   Krishnaraj, Vijayan ^d   Sofiane Almabouacif, Belkacem ^a   Collombet, Francis ^a   Sima, Michal ^b   Jolin, Alain ^c  

^a UNIVERSITÉ DE TOULOUSE   (France)

^b SHM   (Czech Republic)

^c Avenue Pierre Georges Latécore ^*  (France)

^d PSG COLLEGE OF TECHNOLOGY   (India)

Author keywords

A. Hybrid Material; B. Wear; C. Drilling; E. Nano composite coating

Indexed keywords

AEROSPACE STRUCTURE; AUTOMATIC DRILLING; CHIP FORMATIONS; COATED DRILLS; COMMON PROBLEMS; COMPOSITE PLATES; CUTTING PARAMETERS; CYCLE TIME; DRILLING PERFORMANCE; E. NANO-COMPOSITE COATING; FEED-RATES; MACHINING PARAMETERS; MULTI MATERIALS; NANO-COATINGS; THRUST FORCES; TOOL WEAR;

COMPOSITE COATINGS; HYBRID MATERIALS; OIL WELL DRILLING; SURFACE ROUGHNESS; TITANIUM; TUNGSTEN; TUNGSTEN CARBIDE;

DRILLS;

EID: 84858288211     PISSN: 13598368     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesb.2011.08.054     Document Type: Article

References (38)

1. Krishnaraj V, Zitoune R, Collombet F. Comprehensive Review On Drilling Of Multimaterial Stacks. Int J Mach Form Technol 2010; 2(3/4): p. 171-200, ISSN: 1947-4369.
2. W. Koënig, Ch Wulf, H. Grass, and H. Willerscheid Machining of fibre reinforced plastics Ann CIRP 345 1985 37 47
3. R. Zitoune, F. Collombet, R. Piquet, F. Lachaud, and P. Pasquet Experiment-calculation comparison of the cutting conditions representative of the long fibre composite drilling phase Compos Sci Technol 65 2005 455 466
4. D. Arola, M. Ramulu, and H. Wang Chip Formation in orthogonal trimming of graphite/epoxy composites Composites: Part A 27A 1996 121 133
5. D.H. Wang, M. Ramulu, and D. Arola Orthogonal cutting mechanisms of graphite/epoxy composite, Part I. unidirectional laminate Int J Mach Tools 35 1 1995 1623 1638
6. A. Faraz, D. Biermann, and K. Weinert Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates Int J Mach Tools 49 2009 1185 1196
7. C.K.H. Dharan, and M.S. Won Machining parameters for an intelligent machining system for composite laminates Int J Mach Tools Manuf 40 2000 415 426
8. Krishnaraj V, 2006. Study of drilling tool geometry while machining of glass fibre reinforced plastic. Ph.D Dissertation, Anna University, Chennai, India.
9. I. Singh, N. Bhatnagar, and P. Viswanath Drilling of uni-directional glass fiber reinforced plastics- experimental & finite element study J Mater Design 29 2008 546 553
10. J. Campos Rubio, A.M. Abrao, P.E. Faria, A. Esteves Correia, and J. Paulo Davim Effect of high speed in the drilling of glass fiber reinforced plastic: evaluation of the delamination factor Int J Mach Tool Manuf 48 2008 715 720
11. Luís Miguel P. Durão, Daniel J.S. Gonalves, João Manuel R.S. Tavares, Victor Hugo C. de Albuquerque, A. Aguiar Vieira, and A. Torres Marques Drilling tool geometry evaluation for reinforced composite laminates Compos Struct 92 2010 1545 1550
12. A. Langella, L. Nele, and A. Maio A torque and thrust prediction model for drilling of composite materials Composites: Part A 36 2005 83 93
13. D.L. Antoniomaria, P. Alfonso, and V. Francesco Tool wear in drilling thermoset and thermoplastic matrix composites Eng Syst Design Anal 75 1996 41 46
14. J.P. Davim, and P. Reis Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments Compos Struct 59 4 2003 481 487
15. R. Zitoune, and F. Collombet Experimental and analytical study of the influence of HexFit® glass fiber composite manufacturing process on delamination during drilling Int J Mach Machinab Mater 3 3/4 2008 326 342
16. Shyha Islam, Soo Sein Leung, Aspinwall David, and Bradley Sam Effect of laminate configuration and feed rate on cutting performance when drilling holes in carbon fibre reinforced plastic composites J Mater Process Technol 210 2010 1023 1034
17. J. Campos Rubio, A.M. Abrao, P.E. Faria, A. Esteves Correia, and J.P. Davim Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor Int J Mach Tools Manuf 48 2008 715 720
18. P. Erik, E. Ingvar, and Z. Leif Effects of hole machining defects on strength and fatigue life of composite laminates Composite A 31 1997 141 151
19. E. Eriksen The influence of surface roughness on the mechanical strength properties of machined short-fibre-reinforced thermoplastics Compos Sci Technol 60 2000 107 113
20. B. Chamberlain Metals Handbook 1998 ASM
21. G. List, M. Nouari, D. Géhin, S. Gomez, P. Manaud, and Y. Le Petitcorps Wear behaviour of cemented carbide tools in dry machining of aluminium alloy Wear 259 2005 1177 1189
22. M. Nouari, G. List, F. Girot, and G. Géhin Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminium alloys Int J Mach Tools Manuf 45 2005 1436 1442
23. M.S. Carrilero, R. Bienvenido, J.M. Sanchez, M. Alvarez, A. Gonzalez, and M. Marcos A SEM AND EDS insight into the BUL and BUE differences in the turning processes of AA2024 Al-Cu alloy Int J Mach Tools Manuf 42 2002 215 220
24. J.M. Sanchez, E. Rubio, M. Alvarez, M.A. Sebastien, and M. Marcos Microstructural characterisation of material adhered over cutting tool in the dry machining of aerospace aluminium alloys J Mater Process Technol 164-665 2005 911 918
25. M. Ramulu, T. Branson, and D. Kim A study on the drilling of composite and titanium stacks Compos Struct 54 2001 67 77
26. D. Kim, and M. Ramulu Drilling process optimization for graphite/bismaleimide-titanium alloy stacks Compos Struct 63 1 2004 101 114
27. D. Kim, and M. Ramulu Machinability of titanium/graphite hybrid composites in drilling Trans NAMRI/SME 33 2005 445 452
28. E. Brinksmeier, and R. Janssen Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys Annals CIRP 51 1 2002 87 90
29. R. Zitoune, V. Krishnaraj, and F. Collombet Study of drilling of composite material and aluminium stack Compos Struct 92 5 2010 1246 1255
30. V. Krishnaraj, R. Zitoune, and F. Collombet Investigations on drilling of multimaterial and analysis by ANN Key Eng Mater 443 2010 347 352
31. Miguel A, Joel G, Corinne RW, Shantanu T, Athulan V, David D. Strategies for burr minimization and cleanability in aerospace and automotive manufacturing. SAE transactions, vol. 114, no. 1, 2005, ISSN 0096-736X.
32. A.M. Abrao, P.E. Faria, J.C. Campos Rubio, P. Reis, and J. Paulo Davim Drilling of fiber reinforced plastics: review J Mater Process Technol 186 2005 1 7
33. M. Ramulu, C.W. Werna, and J.L. Garbinia Effect of fibre direction on surface roughness measurements of machined graphite/epoxy composite Compos Manuf 4 1 1993 39 51
34. W. König, and P. Graß Quality definition and assessment in drilling of fibre reinforced thermosets CIRP Annals Manuf Technol 38 1 1989 119 124
35. Kalidas, E.D. Richard, and Shiv G. Kapoor Experimental investigation of the effect of drill coating on hole quality under dry and wet drilling conditions Surf Coating Technol 148 2011 117 128
36. Y. Karpat, and T. Özel Analytical and thermal modeling of high-speed machining with chamfered tools J Manuf Sci Eng (ASME) 130 2008 1 15
37. S.H. Yaoa, Y.L. Sub, W.H. Kaoc, K.W. Chengb, and C.T. Sud Nanolayer CrNx/WNy coatings used on micro drills for machining of printed circuit boards J Mater Process Technol 210 4 2010 660 668
38. S. Veprek, and J.G. Maritza Veprek-Heijman, industrial applications of superhard nanocomposite coatings Surf Coat Technol 202 2008 5063 5073