Cutting edge rounding: An innovative tool wear criterion in drilling CFRP composite laminates

International Journal of Machine Tools and Manufacture

Volumn 49, Issue 15, 2009, Pages 1185-1196

  Faraz, Ali ^a   Biermann, Dirk ^a   Weinert, Klaus ^a  

^a TU DORTMUND UNIVERSITY   (Germany)

Author keywords

CFRP laminates; Correlation; Cutting edge rounding; Delamination; Maximum flank wear

Indexed keywords

ABRASION WEAR; CARBIDE DRILLS; CARBON FIBRES; CEMENTED CARBIDES; CFRP COMPOSITES; CFRP LAMINATES; CORRELATION; CUTTING EDGE ROUNDING; CUTTING EDGES; DRILLING THRUST AND TORQUE; ENTRY AND EXIT; FLANK WEAR; MAXIMUM FLANK WEAR; MECHANICAL LOADS; NEW APPROACHES; STATISTICAL LINEAR REGRESSION ANALYSIS; TOOL WEAR; WEAR CHARACTERISTICS; WEAR MODES; WEAR TEST;

ABRASIVE CUTTING; CARBIDE TOOLS; CARBIDES; CARBON FIBERS; CUTTING MACHINES (MINING); CUTTING TOOLS; DELAMINATION; DRILLS; PAPER LAMINATES; REGRESSION ANALYSIS; STEEL SHEET;

DRILLING;

EID: 70349801759     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2009.08.002     Document Type: Article

References (53)

1. Hocheng H., and Puw H.Y. On drilling characteristics of fiber-reinforced thermoset and thermoplastics. International Journal of Machine Tools & Manufacture 32 4 (1992) 583-592
2. Won M.S., and Dharan C.K.H. Chisel edge and pilot hole effects in drilling composite laminates. Journal of Manufacturing Science and Engineering (Transactions of the ASME), USA 124 (2002) 242-247
3. Müller-Hummel P., Richter J., and Müller B. Neue Werkstoffe fordern neue Allianzen. Prozesssichere, Wirtschaftliche Bearbeitung von CFK-IM, Werkstatt und Betrieb (2008) 66-67
4. Künig W., Wulf C., Graß P., and Willerscheid H. Machining of fibre reinforced plastics. Annals of the CIRP 34 (1985) 537-547
5. Tagliaferri V., Caprino G., and Diterlizzi A. Effect of drilling parameters on the finish and mechanical properties of GFRP composites. International Journal of Machine Tools and Manufacture 30 1 (1990) 77-84
6. Babu P.R., and Pradhan B. Effect of damage levels and curing stresses on delamination growth behavior emanating from circular holes in laminated FRP composites. Composites (Part A: Applied Science and Manufacturing) 38 (2007) 2412-2421
7. Jain S., and Yang D.C.H. Delamination-free drilling of composite laminates. Journal of Engineering for Industry (Transactions of the ASME) 116 (1994) 475-481
8. Upadhyay P.C., and Lyons J.S. On the evaluation of critical thrust for delamination-free drilling of composite laminates. Journal of Reinforced Plastics and Composites 18 14 (1999) 1287-1303
9. Bhatnagar N., Ramakrishnan N., Naik H., and Komanduri R. On the machining of fiber-reinforced plastic (FRP) composite laminates. International Journal of Machine Tools and Manufacture 35 5 (1995) 701-716
10. Zhang L.B., Wang L.J., and Liu X.Y. A mechanical model for predicting critical thrust forces in drilling composite laminates. Proceedings of the Institution of Mechanical Engineers (Part B: Journal of Engineering Manufacture) 215 B2 (2001) 135-146
11. Bhatnagar N., Singh I., and Nayak D. Damage investigations in drilling of glass fiber reinforced plastic composite laminates. Materials and Manufacturing Processes 19 6 (2004) 995-1007
12. Davim J.P., and Reis P. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments. Composite Structures 59 4 (2003) 481-487
13. Capello E. Workpiece damping and its effect on delamination damage in drilling thin composite laminates. Journal of Materials Processing Technology 148 2 (2004) 186-195
14. L. Romoli, G. Dini, Experimental study on the influence of drill wear in CFRP drilling process, in: Proceedings of the Sixth CIRP International Conference on Intelligent Computation in Manufacturing Engineering, Naples, Italy, July 2008.
15. Künig W., and Graß P. Quality definition and assessment in drilling of fibre reinforced thermosets. Annals of the CIRP 38 (1989) 119-124
16. Chen W.C. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. International Journal of Machine Tools & Manufacture 37 8 (1997) 1097-1108
17. Mathew J., Ramakrishnan N., and Naik N.K. Trepanning on unidirectional composites: delamination studies. Composites (Part A: Applied Science and Manufacturing) 30 (1999) 951-959
18. Enemuoh E.U., El-Gizawy A.S., and Okafor A.C. An approach for development of damage-free drilling of carbon fiber reinforced thermosets. International Journal of Machine Tools and Manufacture 41 12 (2001) 1795-1814
19. Malhotra S.K. Some studies on drilling of fibrous composites. Journal of Materials Processing Technology 24 (1990) 291-300
20. Dharan C.K.H., and Won M.S. Machining parameters for an intelligent machining system for composite laminates. International Journal of Machine Tools and Manufacture 40 (2000) 415-426
21. Piquet R., Ferret B., Lachaud F., and Swider P. Experimental analysis of drilling damage in thin carbon/epoxy plate using special drills. Composites (Part A: Applied Science and Manufacturing) 31 10 (2000) 1107-1115
22. Davim J.P., and Reis P. Drilling carbon fiber reinforced plastics manufactured by autoclave-experimental and statistical study. Materials & Design 24 5 (2003) 315-324
23. Hocheng H., and Dharan C.K.H. Delamination during drilling in composite laminates. Journal of Engineering for Industry (Transactions of the ASME), USA 112 (1990) 236-239
24. Jain S., and Yang D.C.H. Effects of feedrate and chisel edge on delamination in composites drilling. Journal of Engineering for Industry (Transactions of the ASME), USA 115 4 (1993) 398-405
25. Won M.S., and Dharan C.K.H. Drilling of aramid and carbon fiber polymer composites. Journal of Manufacturing Science and Engineering (Transactions of the ASME), USA 124 (2002) 778-783
26. Tsao C.C., and Hocheng H. Effect of tool wear on delamination in drilling composite materials. International Journal of Mechanical Sciences 49 (2007) 983-988
27. Hocheng H., and Tsao C.C. The path towards delamination-free drilling of composite materials. Journal of Materials Processing Technology 167 (2005) 251-264
28. Tsao C.C., and Hocheng H. Computerized tomography and C-Scan for measuring delamination in the drilling of composite materials using various drills. International Journal of Machine Tools & Manufacture 45 (2005) 1282-1287
29. Tsao C.C., and Hocheng H. The effect of chisel length and associated pilot hole on delamination when drilling composite materials. International Journal of Machine Tools & Manufacture 43 (2003) 1087-1092
30. Hocheng H., and Tsao C.C. Comprehensive analysis of delamination in drilling of composite materials with various drill bits. Journal of Materials Processing Technology 140 (2003) 335-339
31. Tünshoff H.K., and Hohensee V. Bearbeitung faserverstärkter Kunststoffe durch Umrißfräsen. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZwF) 81 2 (1986) 106-111
32. Murphy C., Byrne G., and Gilchrist M.D. The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials. Proceedings of the Institution of Mechanical Engineers (Part B: Journal of Engineering Manufacture) 216 2 (2002) 143-152
33. Sakuma K., Yokoo Y., and Seto M. Study on drilling of reinforced plastics-relation between tool material and wear behaviour. Bulletin of Japan Society of Mechanical Engineers 27 228 (1984) 1237-1244
34. Sakuma K., Seto M., Taniguchi M., and Yokoo Y. Tool wear in cutting carbon-fiber-reinforced plastics (the effect of physical properties of tool materials). Bulletin of Japan Society of Mechanical Engineers 28 245 (1985) 2781-2788
35. Lin S.C., and Chen I.K. Drilling carbon fiber-reinforced composite material at high speed. Wear 194 (1996) 156-162
36. Masuda M., Kuroshima Y., and Chujo Y. Failure of tungsten carbide-cobalt alloy tools in machining of carbon materials. Wear 169 (1993) 135-140
37. Usuki H., Narutaki N., Yamane Y., and Karasuno. T. Ito S. A study on the cutting performance of diamond coated tools-tool wear of diamond coated tools in machining of CFRP. Bulletin of Japan Society for Precision Engineering 25 1 (1991) 35-36
38. Arul S., Vijayaraghavan L., and Malhotra S.K. Online monitoring of acoustic emission for quality control in drilling of polymeric composites. Journal of Materials Processing Technology 185 (2007) 184-190
39. Abrao A.M., Rubio J.C.C., Faria P.E., and Davim J.P. The effect of cutting tool geometry on thrust force and delamination when drilling glass fibre reinforced plastic composites. Materials and Design 29 (2008) 508-513
40. Fernandes M., and Cook C. Drilling of carbon composites using a one shot drill bit-part II: empirical modelling of maximum thrust force. International Journal of Machine Tools and Manufacture 46 (2006) 76-79
41. Biermann D., and Terwey I. Cutting edge preparation to improve drilling tools for HPC processes. CIRP Journal of Manufacturing Science and Technology 1 2 (2008) 76-80
42. Bouzakis K.D., Michailidis N., Skordaris G., Kombogiannis S., Hadjiyiannis S., Efstathiou K., Erkens G., Rambadt S., and Wirth I. Effect of the cutting edge radius and its manufacturing procedure, on the milling performance of PVD coated cemented carbide inserts. CIRP Annals of Manufacturing Technology 51 1 (2002) 61-64
43. Hohensee V. Werkzeugverschleiß und Oberflächengüte beim Bearbeiten von faserverstärkten Kunststoffen. Industrie-Anzeiger 107 84 (1985) 32-33
44. Hohensee V. Konturbearbeitung von Bauteilen aus faserverstärkten Kunststoffen. Kunststoffberater 12 (1987) 32-36
45. Reimann W. Bearbeitung von faserverstärkten Kunststoffen bei hohen schnittgeschwindigkeiten. Technische Mitteilungen, Organ des Hauses der Technik 81 5 (1988) 240-243
46. Klocke F., and Wurtz C. PCD in machining of fibre-reinforced materials. Industrial Diamond Review (IDR) 59 (1999) 65-70
47. K. Weinert, C. Kempmann, Wear development and drill hole quality when drilling textile reinforced polymer material, in: Production Engineering-Research and Development, Annals of the German Academic Society for Production Engineering, vol. 2, 2003, pp. 61-64.
48. W. Hintze, R. Clausen, D. Hartmann, J. Kindler, S. Santos, M. Schwerdt, E. Stüver, Precision of machined CFRP-the challenge of dimensional accuracy, in: Proceedings of the AST Workshop on Aircraft System Technologies, Hamburg, Germany, March 2007, pp. 361-374.
49. Lin S.C., and Shen J.M. Drilling unidirectional glass fiber-reinforced composite materials at high speed. Journal of Composite Materials 33 9 (1999) 827-851
50. Klocke F., Würtz C., and Rummenhüller S. Werkzeugauslegung für die Fräsbearbeitung kohlenstofffaserverstärkter Kunststoffe. VDI-Z Special Werkzeuge (August 1996) 52-54
51. A.T. Marques, L.M. Durao, A.G. Magalhaes, J.M. Tavares, Delamination analysis of carbon fiber reinforced laminates, in: Proceedings of the 16th International Conference on Composite Materials, Kyoto, Japan, July 2007.
52. M. Mehta, T.J. Reinhart, A.H. Soni, Effect of fastener hole drilling anomalies on structural integrity of PMR-15/Gr composite laminates, in: Proceedings of the Machining Composite Materials Symposium, ASM Materials Week, 1992, pp. 113-126.
53. L.M.P. Durao, A.G. Magalhaes, A.T. Marques, J. Manuel, R.S. Tavares, Effect of drilling parameters on composite plates damage, in: Proceedings of the International Conference HSIMP 2007-High Speed Industrial Manufacturing processes, Senlis, France, November 2007.