Study of drilling of composite material and aluminium stack

Composite Structures

Volumn 92, Issue 5, 2010, Pages 1246-1255

  Zitoune, Redouane ^a   Krishnaraj, Vijayan ^a   Collombet, Francis ^a  

^a INSA   (France)

Author keywords

Circularity and hole diameter; Cutting force; Drilling; Multimaterial; Surface finish

Indexed keywords

CUTTING FORCE; CUTTING FORCES; HOLE DIAMETER; MULTI MATERIALS; SURFACE FINISHES;

ALUMINUM; CARBIDES; COMPOSITE MICROMECHANICS; DRILLS; REINFORCED PLASTICS; SURFACES;

DRILLING;

CARBON FIBER; CUTTING; FIBER REINFORCED COMPOSITE; FINISHES; TORQUE;

EID: 74249090184     PISSN: 02638223     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compstruct.2009.10.010     Document Type: Article

References (42)

1. Chen W.C. Some experimental investigations in the drilling of carbon fibre reinforced composite laminations. Int J Mach Tools Manufact 37 8 (1997) 1097-1108
2. Konig W., Cronjager L., Spur G., and Tonshoff H.K. Machining of new materials. Ann CIRP 39 2 (1990) 673-680
3. Komanduri R. Machining of fibre reinforced composites. Mach Sci Technol 1 1 (1997) 113-152
4. Davim J.P., Pedro R., and Conceicao A. Experimental study of drilling glass fiber reinforced (GFRP) manufactured by hand lay-up. Comput Sci Technol 64 (2004) 289-297
5. Bhatnagar N., Nayak D., Singh I., Chouhan H., and Mahajan P. Determination of machining induced damage characteristics of FRP composite laminates. Mater Manufact Process 19 6 (2004) 1009-1023
6. Zitoune R., Collombet F., Lachaud F., and Piquet R. Experiment-calculation comparison of the cutting conditions representative of the long fibre composite drilling phase. Compos Sci Technol 65 (2005) 455-466
7. Zitoune R., Périé JN, Collombet F, Piquet R, Lachaud F. Coupe orthogonale sur composites fibres longues carbone/époxy: comparaison entre mesures de champs et calculs numériques. Colloque National de Photo Mécanique 2004. Albi Carmaux. ISBN 2-9511591-2004. p. 3-7 [in French].
8. Arola D., Ramulu M., and Wang H. Chip Formation in orthogonal trimming of graphite/epoxy composites. Composites Part A 27A (1996) 121-133
9. Zitoune R., Collombet F., and Hernaiz Lopez G. Experimental and analytical study of the influence of HexFit® glass fiber composite manufacturing process on delamination during drilling. Int J Mach Machinability Mater 3 3/4 (2008) 326-342
10. Zitoune R., and Collombet F. Influence of machining quality on composite part manufacturing. In: Davim J.P. (Ed). Drilling of composite materials. Series (2009), Materials and Manufacturing Technology Nova Publishers
11. Tsao C.C., and Hocheng H. Taguchi analysis of delamination associated with various drill bits in drilling of composite materials. Int J Mach Tools Manufact 44 (2004) 1085-1090
12. Davim J.P., and Pedro R. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments. Compos Struct 59 (2003) 481-487
13. Krishnaraj V., Vijayarangan S., and Rameshkumar A. Effect of drilling parameters on mechanical strength in drilling GFRP. Int J Comput Appl Technol 28 1 (2007) 87-93 [Special issue on Advanced Manufacturing Tooling]
14. Hocheng H., and Dharan C.K.H. Delamination during drilling in composite laminates. Trans ASME 112 (1990) 236-239
15. Bhatnagar N., Naik N.K., and Ramakrishnan N. Experimental investigations of drilling on CFRP composites. Mater Manufact Process 8 6 (1993) 683-701
16. Xin W., Wang L.J., and Tao J.P. Investigation on thrust force in vibration drilling of fiber-reinforced plastics. J Mater Process Technol 148 (2004) 239-244
17. Tsao C.C., and Hocheng H. Effect of eccentricity of twist drill and candle drill on delamination in drilling of composite materials. Int J Mach Tools Manufact 45 (2005) 125-130
18. Singh I., Bhatnagar N., and Viswanath P. Drilling of uni-directional glass fiber reinforced plastics: experimental and finite element study. Mater Des 29 (2008) 546-553
19. Zhang L.B., Wang L.J., and Liu X.Y. A mechanical model for predicting critical thrust forces in drilling composite laminates. Proc Inst Mech Eng, B: J Eng Manufact 215 2 (2001) 135-146
20. Jung J.P., Kim G.W., and Lee K.Y. Critical thrust force at delamination propagation during drilling of angle-ply laminates. Compos Struct 68 4 (2005) 391-397
21. Zitoune R., and Collombet F. Numerical Prediction of the thrust force responsible of delamination during drilling of the long fibre composite structures. Compos A. Appl Sci Manufact 38 (2007) 858-886
22. Durào L.M.P., Moura M.F.S.F., and Marques A.T. Numerical prediction of delamination onset in carbon/epoxy composites drilling. Eng Fract Mech 75 9 (2008) 2767-2778
23. Chamberlain B. Metals handbook (1998), ASM
24. List G., Nouari M., Ǵehin D., Gomez S., Manaud P., Le Petitcorps Y., et al. Wear behaviour of cemented carbide tools in dry machining of aluminium alloy. Wear 259 (2005) 1177-1189
25. Nouari M., List G., Girot F., and Géhin G. Effect of machining parameters and coating on wear mechanisms in dry drilling of aluminium alloys. Int J Mach Tools Manufact 45 (2005) 1436-1442
26. Rivero A., Aramendi G., Herranz S., and Lopez de Lacalle L.N. An experimental investigation of the effect of coatings and cutting parameters on the dry drilling performance of aluminium alloys. Int J Adv Manufact Technol 28 (2006) 1-11
27. Kelly J.F., and Cotterell M.G. Minimal lubrication machining of aluminium alloys. J Mater Process Technol 120 (2002) 327-334
28. Batzer S.A., Haan D.M., Rao P.D., Olson W.W., and Sutherland J.W. Chip morphology and hole surface texture in the drilling of cast aluminum alloys. J Mater Process Technol 79 (1998) 72-78
29. Grzesik W., and Nieslony P. The influence of thin hard coatings on friction in the orthogonal cutting process. Trans NAMRI/SME 28 (2000) 113-118
30. Sakurai K., Adachi K., Kawai G., Sawai T., and Ogawa K. High feed rate drilling of aluminium alloy. Mater Sci Forum 331-337 1 (2000) 625-630
31. Hamade R.F., and Ismail F. A case for aggressive drilling of aluminum. J Mater Process Technol 166 (2005) 86-97
32. Brinksmeier E., and Janssen R. Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminum alloys. Ann CIRP 51 1 (2002) 87-90
33. Ramulu M., Branson T., and Kim D. A study on the drilling of composite and titanium stacks. Compos Struct 54 (2001) 67-77
34. Kim D., and Ramulu M. Drilling process optimization for graphite/bismaleimide-titanium alloy stacks. Compos Struct 63 1 (2004) 101-114
35. Kim D., and Ramulu M. Machinability of titanium/graphite hybrid composites in drilling. Trans NAMRI/SME 33 (2005) 445-452
36. Kim D., and Ramulu M. Study on the drilling of titanium/graphite hybrid composites. J Eng Mater Technol 129 3 (2007) 390-397
37. Roudge M., Cherif M., Cahuc O., Darnis P., and Danis M. Multi-layers materials. Qualitative approach of the process. Int J Mater Form 1 1 (2008) 949-952
38. Denkena B., Boehnke D., and Dege J.H. Helical milling of CFRP-titanium layer compounds. CIRP J Manufact Sci Technol 1 2 (2008) 64-69
39. Mike T. Composites challenge cutting tools. Manufact Eng 138 4 (2007)
40. Velayudham A., Krishnamurthy R., and Soundarapandian T. Evaluation of drilling characteristics of high volume fraction fiber glass reinforced polymeric composites. Int J Mach Tools Manufact 5 (2005) 339-406
41. Won M.S., and Dharan C.K.H. Chisel edge and pilot hole effects in drilling composite laminates. J Manufact Sci Eng 124 2 (2002) 242-247
42. Ramkumar J., Aravindan S., Malhotra S.K., and Krishnamurthy R. An enhancement of the machining performance of GFRP by oscillatory assisted drilling. Int J Adv Manufact Technol 23 (2004) 240-244