Preload evaluation of different screws in external hexagon joint

Implant Dentistry

Volumn 21, Issue 1, 2012, Pages 46-50

  Assunção, Wirley Gonçalves ^a   Delben, Juliana Aparecida ^a   Tabata, Lucas Fernando ^b   Barão, Valentim Adelino Ricardo ^a   Gomes, Érica Alves ^c   Garcia Jr , Idelmo Rangel ^a  

^a SÃO PAULO STATE UNIVERSITY UNESP   (Brazil)

^b UNIVERSITY OF BRASILIA   (Brazil)

^c UNIVERSITY OF SÃO PAULO   (Brazil)

Author keywords

dental implants; implantsupported dental prosthesis; prosthesis failure; torque

Indexed keywords

BIOMATERIAL; GOLD ALLOY; TITANIUM; TITANIUM NITRIDE;

ANALYSIS OF VARIANCE; ARTICLE; COMPARATIVE STUDY; DENTAL PROCEDURE; INSTRUMENTATION; TOOTH CROWN; TOOTH IMPLANTATION; TOOTH PROSTHESIS; TORQUE;

ANALYSIS OF VARIANCE; COATED MATERIALS, BIOCOMPATIBLE; CROWNS; DENTAL IMPLANTS; DENTAL PROSTHESIS DESIGN; DENTAL PROSTHESIS RETENTION; DENTAL PROSTHESIS, IMPLANT-SUPPORTED; DENTAL STRESS ANALYSIS; GOLD ALLOYS; TITANIUM; TORQUE;

EID: 84856424459     PISSN: 10566163     EISSN: None     Source Type: Journal    
DOI: 10.1097/ID.0b013e31823fcbce     Document Type: Article

References (26)

1. Bozkaya D, MüftüS. Mechanics of the taper integrated screwed-in (TIS) abutments used in dental implants. J Biomech. 2005;38:87-97. (Pubitemid 39424982)
2. Goodacre CJ, Bernal G, Rungcharassaeng K, et al. Clinical complications with implants and implant prostheses. J Prosthet Dent. 2003;90:121-132. (Pubitemid 37304984)
3. Jung RE, Pjetursson BE, Glauser R, et al. A systematic review of the 5-year survival and complication rates of implantsupported single crowns. Clin Oral Impl Res. 2008;19:119-130.
4. Kreissl ME, Gerds T, Muche R, et al. Technical complications of implantsupported fixed partial dentures in partially edentulous cases after an average observation period of 5 years. Clin Oral Impl Res. 2007;18:720-726.
5. Guda T, Ross TA, Lang LA, et al. Probabilistic analysis of preload in the abutment screw of a dental implant complex. J Prosthet Dent. 2008;100:183-193.
6. Jemt T, Lekholm U, Grondahl K. 3-year follow up study of early single implant restorations ad modum Brånemark. Int J Periodontics Restorative Dent. 1990; 10:340-349.
7. Pjetursson BE, Tan K, Lang NP, et al. A systematic review of the survival and complication rates of fixed partial dentures (FPDs) after an observation period of at least 5 years. I. Implant-supported FPDs. Clin Oral Impl Res. 2004;15:625-642. (Pubitemid 40115751)
8. Weiss EI, Kozak D, Gross MD. Effect of repeated closures on opening torque values in seven abutment-implant systems. J Prosthet Dent. 2000;84:194-199.
9. Byrne D, Jacobs S, O'Connell B, et al. Preloads generated with repeated tightening in three types of screws used in dental implant assemblies. J Prosthodont. 2006;15:164-171. (Pubitemid 43653911)
10. Martin WC, Woody RD, Miller BH, et al. Implant abutment screw rotations and preloads for four different screw materials and surfaces. J Prosthet Dent. 2001; 86:24-32. (Pubitemid 33601396)
11. Jaarda MJ, Razzoog ME, Gratton DG. Geometric comparison of five interchangeable implant prosthetic retaining screws. J Prosthet Dent. 1995;74:373-379.
12. Lang LA, Kang B, Wang RF, et al. Finite element analysis to determine implant preload. J Prosthet Dent. 2003;90: 539-546. (Pubitemid 37532504)
13. Kano SC, Binon P, Bonfante G, et al. Effect of casting procedures on screw loosening in UCLA-type abutments. J Prosthodont. 2006;15:77-81. (Pubitemid 43597971)
14. Bickford JH. An Introduction to the Design and Behavior of Bolted Joints. New York: Marcel Dekker; 1981:175-268.
15. Yousef H, Luke A, Ricci J, et al. Analysis of changes in implant screws subject to occlusal loading: A preliminary analysis. Implant Dent. 2005;14:378-382.
16. Tzenakis GK, Nagy WW, Fournelle RA, et al. The effect of repeated torque and salivary contamination on the preload of slotted gold implant prosthetic screws. J Prosthet Dent. 2002;88:183-191. (Pubitemid 40433881)
17. Kim SK, Lee JB, Koak JY, et al. An abutment screw loosening study of a diamond like carbon-coated CP titanium implant. J Oral Rehabil. 2005;32:346-350. (Pubitemid 40655804)
18. Gratton DG, Aquilino SA, Stanford CM. Micromotion and dynamic fatigue properties of the dental implant-abutment interface. J Prosthet Dent. 2001;85: 47-52. (Pubitemid 33660929)
19. Cantwell A, Hobkirk JA. Preload loss in gold prosthesis retaining screws as a function of time. Int J Oral Maxillofac Implants. 2004;19:124-132. (Pubitemid 38251155)
20. Khraisat A, Hashimoto A, Nomura S, et al. Effect of lateral cyclic loading on abutment screw loosening of an external hexagon implant system. J Prosthet Dent. 2004;91:326-334. (Pubitemid 38515792)
21. Dixon DL, Breeding LC, Sadler JP, et al. Comparison of screw loosening, rotation, and deflection among three implant designs. J Prosthet Dent. 1995;74:270-278.
22. Patterson EA, Johns RB. Theoretical analysis of the fatigue life of fixture screws in osseointegrated dental implants. Int J Oral Maxillofac Implants. 1992;7:26-33.
23. Drago C. Implants and implant restorative components. Implant Restorations-A Step-by-Step Guide. Ames, IA: Blackwell Publications; 2007: 17-54.
24. Assunção WG, dos Santos PH, Delben JA, et al. Effect of misfit on preload maintenance of retention screws of implant-supported prostheses. J Mater Eng Perform. 2009;18:935-938.
25. Shigley JE. Mechanical Engineering Design. New York: McGraw Hill. 1977: 227-273.
26. Jorneas L, Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implant. 1992;7:353-359.