Measuring residual stress in ceramic zirconia-porcelain dental crowns by nanoindentation

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 6, Issue , 2012, Pages 120-127

  Zhang, Y ^a   Allahkarami, M ^a   Hanan, J C ^a  

^a Oklahoma State University   (United States)

Author keywords

Dental crowns; Nanoindentation; Porcelain; Residual stress; Zirconia

Indexed keywords

CERAMIC CROWNS; CERAMIC DENTAL CROWNS; COMPLEX SHAPES; CRITICAL LOCATION; DENTAL CROWNS; DISTRIBUTION OF RESIDUAL STRESS; FINITE ELEMENT MODELING; MEASURED RESULTS; NANOINDENTATION IMPRESSIONS; NANOINDENTATION TESTS; PILE-UPS; SCANNING PROBE MICROSCOPE;

NANOINDENTATION; PILES; PORCELAIN; RESIDUAL STRESSES; X RAY DIFFRACTION;

ZIRCONIA;

ZIRCONIUM OXIDE;

ARTICLE; CERAMICS; CONTROLLED STUDY; HARDNESS; MAGNITUDE ESTIMATION METHOD; MECHANICAL STRESS; NANOINDENTATION; NANOTECHNOLOGY; PRIORITY JOURNAL; RESIDUAL STRESS; SCANNING PROBE MICROSCOPY; SIMULATION; THICKNESS; TOOTH CROWN; TOOTH PROSTHESIS; VALIDITY; X RAY DIFFRACTION;

CROWNS; DENTAL PORCELAIN; FINITE ELEMENT ANALYSIS; HARDNESS TESTS; NANOTECHNOLOGY; STRESS, MECHANICAL; X-RAY DIFFRACTION; ZIRCONIUM;

EID: 82955207630     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2011.11.006     Document Type: Article

References (41)

1. Allahkarami M., Bale H.A., Hanan J.C. Analytical model for prediction of residual stress in zirconia porcelain bi-layer. Advances in Bioceramics and Porous Ceramics III: Ceramic Engr. and Sci. Proc. 2010, vol. 31:19-26. John Wiley & Sons.
2. Bale, H.A., 2010. Measurement and analysis of residual stresses in zirconia dental composites using micro X-ray. Dissertation, Oklahoma State University.
3. Bale, H.A., Allahkarami, M., Tamura, N., Hanan, J.C., 2011. Microbeam X-ray grain averaged residual stress in dental ceramics. In: 35th International Conference on Advanced Ceramics & Composites, ICACC, FL, USA.
4. Bale H.A., Hanan J.C. Interface residual stresses in dental zirconia using laue micro diffraction. 8th International Conference on Residual Stresses 2008, Denver, CO.
5. Bolshakov A., Oliver W.C., Pharr G.M. Influence of stress on the measurement of mechanical properties using nanoindentation: part II. Finite element simulations. J. Mater. Res. 1996, 11(3):760-768.
6. Carlsson S., Larsson P.L. On the determination of residual stress and strain fields by sharp indentation testing part II: experimental investigation. Acta Mater. 2001, 49:2193-2203.
7. Chintapalli R.K., Jimenez-Pique E., Marro F.G., Yan H., Reece M., Anglada M. Spherical instrumented indentation of porous nanocrystalline zirconia. J. Eur. Ceram. Soc. 2012, 32:123-132.
8. Choi Y., Lee H.S., Kwon D. Analysis of sharp-tip-indentation load-depth curve for contact area determination taking account pile-up and sink-in effects. J. Mater. Res. 2004, 19(11):3307-3315.
9. Christel P., Munier A., Heller M., Torre J.P., Peille C.N. Mechanical properties and short-term in-vivo evaluation of yttrium-oxide-partially-stablized zirconia. J. Biomed. Mater. Res. 1989, 23(1):45-61.
10. Coelho P.G., Bonfante E.A., Silva N.R.F., Rekow E.D., Thompson V.P. Laboratory simulation of Y-TZP all-ceramic crown clinical failures. J. Dent. Res. 2009, 88(4):382-386.
11. Coelho P.G., Silva N.R., Bonfante E.A., Guess P.C., Rekow E.D., Thompson V.P. Fatigue testing of two porcelain-zirconia all-ceramic crown systems. Dent. Mater. 2009, 25:1122-1127.
12. Denry I., Kelly J.R. State of the art of zircionia for dental application. Dent. Mater. 2008, 24:299-307.
13. Fischer H., Hemelik M., Telle R., Mark R. Influence of annealing temperature on the strength of dental glass ceramic materials. Dent. Mater. 2005, 21:671-677.
14. Fischer J., Stawarczyk B., Hammerle C.H.F. Flexural strength of veneering ceramics for zirconia. J. Dent. 2008, 36:316-321.
15. Gaillard Y., Anglada M., Jimenez-Pique E. Nanoindentation of yttria dopped zirconia: effect of crystallographic structure on deformation mechanisms. J. Mater. Res. 2009, 24(3):719-727.
16. Gogotsi G.A., Dub S.N., Lomonova E.E., Ozersky B.I. Vickers and knoop indentation behavior of cubic and partially stabilized zirconia crystals. J. Eur. Ceram. Soc. 1995, 15:405-413.
17. Gong J., Miao H., Peng Z. Analysis of the nanoindentation data measured with a Berkovich indenter for brittle materials: effect of the residual contact stress. Acta Mater. 2004, 52:785-793.
18. Ho C.J., Liu H.C., Tuan W.H.M. Effect of abrasive grinding on the strength of Y-TZP. J. Eur. Ceram. Soc. 2009, 29:2665-2669.
19. Hsueh C.H., Thompson G.A., Jadaan O.M., Wereszczak A.A., Becher P.F. Analysis of layer-thickness effects in bilayer dental ceramics subjected to thermal stresses and ring on ring tests. Dent. Mater. 2008, 24:9-19.
20. Johnson K.L. Contact Mechanics 1985, Cambridge University Press, Cambridge.
21. Juy A., Anglada M. Strength and grinding residual stresses of Y-TZP with duplex microstructures. Eng. Fail. Anal. 2009, 16:2586-2597.
22. Kon M., O'Brian W.J., Rasmussen S.T., Asaoka K. Mechanical properties of glass-only porcelains prepared by the use of two feldspathic frits with different thermal properties. J. Dent. Res. 2001, 80(8):1758-1763.
23. Krawitz A.D. Introduction to Diffraction in Materials, Science, and Engineering 2001, John Wiley.
24. Larsson C., Von S.P., Sunzel B., Nilner K. All-ceramic two and five-unit implant-supported reconstructions, a randomized, prospective clinical trial. Swed. Dent. J. 2006, 30:45-53.
25. Mainjot A.K., Schajer G.S., Vanheusden A.J., Sadoun M.J. Residual stress measurement in veneering ceramic by hole-drilling. Dent. Mater. 2011, 27:439-444.
26. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 1992, 7:1564-1583.
27. Pjetursson B.E., Sailer I., Zwahlen M., Hammerle C.H. A systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part I: single crowns. Clin. Oral Implan. Res. 2008, 18(Suppl. 3):S73-S85. Clin. Oral Impl. Res. 19, 326-328 (erratum).
28. Raigrodski A.J. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J. Prosthet. Dent. 2004, 92(6):557-562.
29. Raigrodski A.J., Chiche G.J., Potiket N., Hochstedler J.L., Mohamed S.E., Billot S. The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial denture prostheses: a prospective clinical pilot study. J. Prosthet. Dent. 2006, 96:237-244.
30. Suresh S., Giannakopoulos A.E. A new method estimating residual stress by instrumented sharp indentation. Acta Mater. 1998, 46(16):5755-5767.
31. Swadner J.G., Taljat B., Pharr G.M. Measurement of residual stress by load and depth sensing indentation with spherical indenters. J. Mater. Res. 2001, 16(17):2091-2102.
32. Swain M.V. Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures. Acta Biomater. 2009, 5:1668-1677.
33. Tabor D. Hardness of Metals 1951, Cambridge University Press, Cambridge.
34. Tanaka K., Kanari M., Matsui N. Acontinuum dislocation model of vickers indentation on zirconia. Acta Mater. 1999, 47:2243-2257.
35. Taskonak B., Griggs J.A., Mecholsky J.J., Yan J. Analysis of subcritical growth in dental ceramics using fracture mechanics and fractography. Dent. Mater. 2008, 24:700-707.
36. Tholey M.J., Swain M.V., Thiel N. Thermal gradients and residual stresses in veneered Y-TZP frameworks. Dent. Mater. 2011, 10.1016/j.dental.2011.08.001.
37. Tsalouchou E., Cattell M.J., Knoeles J.C., Pittayachawan P., McDonald A. Fatigue and fracture properties of yttria partially stabilized zirconia crown systems. Dent. Mater. 2008, 24:308-318.
38. Tsui T.Y., Oliver W.C., Pharr G.M. Influence of stress on the measurement of mechanical properties using nanoindentation: part I. Experimental studies in an aluminum alloy. J. Mater. Res. 1996, 11(3):752-759.
39. Von S.P. All-ceramic fixed partial dentures, studies on aluminum oxide- and zirconium dioxide based ceramic systems. Swed. Dent. J. Suppl. 2005, 173:1-69.
40. ® a two year clinical study. J. Oral. Rehabil. 2005, 32:180-187.
41. Zhang, Y., Hanan, J.C., 2011. Residual stress in ceramic zirconia-porcelain crowns by nanoindentation. In: ICACC, Daytona, FL.